|
Eric,
The price Amel quoted is 416.24€ plus freight. It is my understanding that Amel is shipping this new caliper now, but I do not know how much inventory they have.
I agree, I like the design. I spoke with Thierry regarding the fit and ease of installation. He said that he could not be 100% sure of the ease of installation, but he assured me that it would install. It is made by the same company that made the older design on your boat. If I were you, I would ask Amel SAV directly, as the answer may have evolved in the last 2 months.
Best,
Bill Rouse
720 Winnie St. Galveston, Texas 77550 832-380-4970
Bill, It looks very nice. What was the cost from Amel? I have some parts waiting to get put together at Amel for shipment. When do you think this assembly will be shipped. Is it for the Kimberlite Amel Super Maramu? Fair Winds Eric From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of CW Bill Rouse
Sent: Thursday, April 04, 2019 4:55 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Shaft brake conundrum, any ideas appreciated! Porter, et al
I have been waiting to respond because there were some things developing.
Amel recently quoted a new and improved caliper assembly to one of my clients who originally ordered brake shoe assemblies. I added a photo of this improved calipher here: https://amelyachtowners.groups.io/g/main/photo/84614/0?p=Created,,,20,2,0,0
From what I understand from Amel this will be used going forward and that the pads and other parts for the old caliper may not be available anymore. I also understood from them that they were not sure of the difficulty in installing this new part.
I like the design of the new part. As soon as my client installs it, I will post whether there were and difficulties.
-- Best, Bill Rouse
Yacht School
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970
|
|
|
eric freedman <kimberlite@...>
Thanks Bill. Fair Winds Eric Kimberlite Amel Super Maramu #376
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of CW Bill Rouse
Sent: Friday, April 05, 2019 10:13 AM
To: main@amelyachtowners.groups.io
Subject: [AmelYachtOwners] New Caliper design for the Shaft Brake The price Amel quoted is 416.24€ plus freight. It is my understanding that Amel is shipping this new caliper now, but I do not know how much inventory they have. I agree, I like the design. I spoke with Thierry regarding the fit and ease of installation. He said that he could not be 100% sure of the ease of installation, but he assured me that it would install. It is made by the same company that made the older design on your boat. If I were you, I would ask Amel SAV directly, as the answer may have evolved in the last 2 months. Bill, It looks very nice. What was the cost from Amel? I have some parts waiting to get put together at Amel for shipment. When do you think this assembly will be shipped. Is it for the Kimberlite Amel Super Maramu? Fair Winds Eric From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of CW Bill Rouse
Sent: Thursday, April 04, 2019 4:55 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Shaft brake conundrum, any ideas appreciated! Porter, et al
I have been waiting to respond because there were some things developing.
Amel recently quoted a new and improved caliper assembly to one of my clients who originally ordered brake shoe assemblies. I added a photo of this improved calipher here: https://amelyachtowners.groups.io/g/main/photo/84614/0?p=Created,,,20,2,0,0
From what I understand from Amel this will be used going forward and that the pads and other parts for the old caliper may not be available anymore. I also understood from them that they were not sure of the difficulty in installing this new part.
I like the design of the new part. As soon as my client installs it, I will post whether there were and difficulties.
-- Best, Bill Rouse
Yacht School
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970
|
|
|
Bill, following your advise I’ve asked Amel whether the new design is suitable on the SM2000 #468. And the answer was negative. I’ve then called the producer, who confirmed that the adjustments should be very easy. So far we didn’t buy yet, but we think that there’s no other solution. All the best Donato
SM2000, Hull 468, now lonely in Sidney area.
Il giorno ven 5 apr 2019 alle 16:13 CW Bill Rouse < brouse@...> ha scritto: Eric,
The price Amel quoted is 416.24€ plus freight. It is my understanding that Amel is shipping this new caliper now, but I do not know how much inventory they have.
I agree, I like the design. I spoke with Thierry regarding the fit and ease of installation. He said that he could not be 100% sure of the ease of installation, but he assured me that it would install. It is made by the same company that made the older design on your boat. If I were you, I would ask Amel SAV directly, as the answer may have evolved in the last 2 months.
Best,
Bill Rouse
832-380-4970 Bill, It looks very nice. What was the cost from Amel? I have some parts waiting to get put together at Amel for shipment. When do you think this assembly will be shipped. Is it for the Kimberlite Amel Super Maramu? Fair Winds Eric From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of CW Bill Rouse
Sent: Thursday, April 04, 2019 4:55 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Shaft brake conundrum, any ideas appreciated! Porter, et al
I have been waiting to respond because there were some things developing.
Amel recently quoted a new and improved caliper assembly to one of my clients who originally ordered brake shoe assemblies. I added a photo of this improved calipher here: https://amelyachtowners.groups.io/g/main/photo/84614/0?p=Created,,,20,2,0,0
From what I understand from Amel this will be used going forward and that the pads and other parts for the old caliper may not be available anymore. I also understood from them that they were not sure of the difficulty in installing this new part.
I like the design of the new part. As soon as my client installs it, I will post whether there were and difficulties.
--
|
|
|
Donato,
I believe that Amel SAV response has been changing over time, probably because they are not 100% sure. And, I am not sure because possible the assembly has changed over time. SAV told me that it should fit on a SM hull that is between 325 and 335 (I give a range because the SM owner is a client). Additionally, SAV said that there may be some installation difficulty, but not impossible.
That is all I know. My information is 5 weeks old. Most likely SAV has additional information.
Best,
Bill Rouse
720 Winnie St. Galveston, Texas 77550 832-380-4970
Bill, following your advise I’ve asked Amel whether the new design is suitable on the SM2000 #468. And the answer was negative. I’ve then called the producer, who confirmed that the adjustments should be very easy. So far we didn’t buy yet, but we think that there’s no other solution. All the best Donato
SM2000, Hull 468, now lonely in Sidney area. Il giorno ven 5 apr 2019 alle 16:13 CW Bill Rouse < brouse@...> ha scritto: Eric,
The price Amel quoted is 416.24€ plus freight. It is my understanding that Amel is shipping this new caliper now, but I do not know how much inventory they have.
I agree, I like the design. I spoke with Thierry regarding the fit and ease of installation. He said that he could not be 100% sure of the ease of installation, but he assured me that it would install. It is made by the same company that made the older design on your boat. If I were you, I would ask Amel SAV directly, as the answer may have evolved in the last 2 months.
Best,
Bill Rouse
832-380-4970 Bill, It looks very nice. What was the cost from Amel? I have some parts waiting to get put together at Amel for shipment. When do you think this assembly will be shipped. Is it for the Kimberlite Amel Super Maramu? Fair Winds Eric From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of CW Bill Rouse
Sent: Thursday, April 04, 2019 4:55 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Shaft brake conundrum, any ideas appreciated! Porter, et al
I have been waiting to respond because there were some things developing.
Amel recently quoted a new and improved caliper assembly to one of my clients who originally ordered brake shoe assemblies. I added a photo of this improved calipher here: https://amelyachtowners.groups.io/g/main/photo/84614/0?p=Created,,,20,2,0,0
From what I understand from Amel this will be used going forward and that the pads and other parts for the old caliper may not be available anymore. I also understood from them that they were not sure of the difficulty in installing this new part.
I like the design of the new part. As soon as my client installs it, I will post whether there were and difficulties.
--
|
|
|
Barbara Stringfellow <bb16negri@...>
Why not contact the company directly for tecnical advice on the installation.? Coremo Ocmea, Assago, Milano, Italy. The e-mail address is on the piece.
|
|
|
eric freedman <kimberlite@...>
I looked up the piece and it is not in their catalog. I believe it is manufactured only for Amel. Fair Winds Eric Kimberlite Amel Super Maramu #376
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Barbara Stringfellow
Sent: Sunday, April 07, 2019 1:43 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] New Caliper design for the Shaft Brake Why not contact the company directly for tecnical advice on the installation.? Coremo Ocmea, Assago, Milano, Italy. The e-mail address is on the piece.
|
|
|
