Volvo TMD22 Exhaust Elbow
|
I want to replace the exhaust elbow on my Volvo TMD22. As usual, Volvo OEM price is very high. $1,050USD. There is an aftermarket supplier in the U.K. (Parts4Engines) listing a SS elbow for $500. Has anyone had their elbow custom machined in SS and if so, what was the price?
Many thanks. Ian Loca Lola II SM153 US East Coast |
|
|
|
Ian, HDI is a "Yacht School Preferred Vendor" and makes One-Piece Casted (not machined) Stainless Steel Exhaust Elbows. Their "AD" model is what I believe you want. Their price is $455 less your Yacht School discount. Here is a link to their exhaust listings: Best, CW Bill Rouse 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970 On Wed, Jun 19, 2019 at 11:51 AM Ian Townsend <smlocalola@...> wrote: I want to replace the exhaust elbow on my Volvo TMD22. As usual, Volvo OEM price is very high. $1,050USD. There is an aftermarket supplier in the U.K. (Parts4Engines) listing a SS elbow for $500. Has anyone had their elbow custom machined in SS and if so, what was the price? |
|
|
|
Ian,
Parts4Engines lists this at $270 in Aluminum (no VAT if shipped to US). Suspect custom SS will be $$. You might also try Trans Atlantic Diesel for a Perkins M80T. Craig, SN68 |
|
|
|
Grrreat! Merci beaucoup Bill. Ian & Margaret S/V Loca Lola II SM153 Exumas, Bahamas On Jun 19, 2019, at 1:18 PM, CW Bill Rouse <brouse@...> wrote:
|
|
|
|
Thx Craig, will check it out. Ian & Margaret S/V Loca Lola II SM153 Exumas, Bahamas On Jun 19, 2019, at 1:18 PM, Craig Briggs via Groups.Io <sangaris@...> wrote:
|
|
|
|
Ian,
You may want to spend a little bit of time searching eBay. I have Yanmar and found a stainless steel elbow on eBay that has worked perfectly. Good luck with the hunt.
With best regards,
Mark
Skipper Sailing Vessel - Cream Puff - SM2K - #275 Currently cruising - Vista Mar, Panama www.creampuff.us
From:
main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On
Behalf Of Ian Townsend
I want to replace the exhaust elbow on my Volvo TMD22. As
usual, Volvo OEM price is very high. $1,050USD. There is an aftermarket
supplier in the U.K. (Parts4Engines) listing a SS elbow for $500. Has anyone
had their elbow custom machined in SS and if so, what was the price? |
|
|
|
Mark, What you bought on ebay is the same company that I mentioned to Ian. They started as a very small company, but had huge success with Cast Stainless Steel. You and I bought the Yanmar for about $270 on eBay. The Volvo TMD22 is much more difficult to make. Best, CW Bill Rouse 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970 On Wed, Jun 19, 2019 at 1:15 PM Mark Erdos <mcerdos@...> wrote:
|
|
|