Topics

Dessslator HP hoses

Alan Grayson
 

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Regards
Alan Grayson
SV Ora Pai
Annapolis, MD

Germain Jean-Pierre
 

Hello Alan,

You can get great quality hoses from an hydraulic shop which services the dairy industry with food grade components.

I went that route and never had a problem with My Dessalator.

GL

Jean-Pierre Germain 
Eleuthera, SM 007, Fiji


On 24 Jul 2019, at 03:46, Alan Grayson <bazgrayson@...> wrote:

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Regards
Alan Grayson
SV Ora Pai
Annapolis, MD

 

Alan,

FYI, I bought 2 high pressure hydraulic hoses 6' long with stainless steel 3/8" JIC Flare end fittings crimped on both ends of the hoses for about $200.

Don't forget about your Yacht School Discount at Dessalator.

Best,

CW Bill Rouse
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970



On Tue, Jul 23, 2019 at 1:58 PM Germain Jean-Pierre <jp.germain45@...> wrote:
Hello Alan,

You can get great quality hoses from an hydraulic shop which services the dairy industry with food grade components.

I went that route and never had a problem with My Dessalator.

GL

Jean-Pierre Germain 
Eleuthera, SM 007, Fiji


On 24 Jul 2019, at 03:46, Alan Grayson <bazgrayson@...> wrote:

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Regards
Alan Grayson
SV Ora Pai
Annapolis, MD

eric freedman
 

Alan,

You can go to any hydraulic shop—they can make you up the hoses for  you.

They are usually rated at 4000 psi and have swaged on fittings. Probably for 50-60 dollars.

If I remember correctly the fittings are called JIC fittings.

I have been using these type of hoses for my stove, the hydraulic brake hose as a spare, and my watermaker. They do have drinking water quality hoses on special order , however I use regular hoses and my TDS meter always reads around 200.

 

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

Here is the fitting in steel- granger  might have it in brass or ss.

 

https://www.grainger.com/product/2F513?gclid=EAIaIQobChMI3LnOwoLM4wIVjYzICh0irgnYEAQYBCABEgIxmvD_BwE&cm_mmc=PPC:+Google+PLA&ef_id=EAIaIQobChMI3LnOwoLM4wIVjYzICh0irgnYEAQYBCABEgIxmvD_BwE:G:s&s_kwcid=AL!2966!3!284662588495!!!g!475511574427!

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Alan Grayson
Sent: Tuesday, July 23, 2019 11:47 AM
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Dessslator HP hoses

 

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Regards
Alan Grayson
SV Ora Pai
Annapolis, MD

Alan Grayson
 

Thanks Guys, I think i have found a shop who can do it. Thanks for the advice i did not even think about hydraulic shops as i would prefer food grade hoses.
Regards
Alan Grayson
SV Ora Pai

Aldo Roldan
 

Alan.  Would you please provide the Dessalator US rep information? I was not aware they had one.  Thank you . Aldo

A55- Araucaria 

On Jul 23, 2019, at 11:46 AM, Alan Grayson <bazgrayson@...> wrote:

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Regards
Alan Grayson
SV Ora Pai
Annapolis, MD

Mark McGovern
 

Aldo,

It's Mark Fruehauf at www.balcen.com. Email is info at balcen.com.

--
Mark McGovern
SM #440 Cara
Deale, MD USA

John Clark
 

If you reuse fittings make sure the hose tech knows how to do it. I had hoses made in the US with the reusable fittings.  The hoses lasted about five hours before leaking internally bubbles under the sheathing and dribbling water.  Luckily I caught it before they blew.  Bought new hoses in Martinique.


On Fri, Jul 26, 2019, 11:47 AM Aldo Roldan via Groups.Io <aroldan1796=yahoo.com@groups.io> wrote:
Alan.  Would you please provide the Dessalator US rep information? I was not aware they had one.  Thank you . Aldo

A55- Araucaria 

On Jul 23, 2019, at 11:46 AM, Alan Grayson <bazgrayson@...> wrote:

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Regards
Alan Grayson
SV Ora Pai
Annapolis, MD

Oliver Henrichsen, SV Vela Nautica
 

Hi All,
I ran into same problem and the hose from high pressure pump came off before i could change my hoses.
Does anybody know how these terminals are caled? What kind of connector is that?
Since I learned here that the end fittings are reusable i will order the hoses in France.
Dessalator did not give a hint that I can reuse the fittings.

Oliver A54#39
Portugal

Sent from my Huawei Mobile


-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: "Aldo Roldan via Groups.Io"
To: main@amelyachtowners.groups.io
CC:


Alan.  Would you please provide the Dessalator US rep information? I was not aware they had one.  Thank you . Aldo

A55- Araucaria 

On Jul 23, 2019, at 11:46 AM, Alan Grayson <bazgrayson@...> wrote:

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Regards
Alan Grayson
SV Ora Pai
Annapolis, MD

 

Yes, the Dessalator High pressure fittings are "3/8 inch JIC stainless steel fittings". JIC fittings are a type of flare fitting which is machined with a 37-degree flare seating surface.  

Best,

CW Bill Rouse
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970



On Wed, Jul 31, 2019 at 10:37 AM Oliver Henrichsen, SV Vela Nautica <oliver.henrichsen@...> wrote:
Hi All,
I ran into same problem and the hose from high pressure pump came off before i could change my hoses.
Does anybody know how these terminals are caled? What kind of connector is that?
Since I learned here that the end fittings are reusable i will order the hoses in France.
Dessalator did not give a hint that I can reuse the fittings.

Oliver A54#39
Portugal

Sent from my Huawei Mobile


-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: "Aldo Roldan via Groups.Io"
To: main@amelyachtowners.groups.io
CC:


Alan.  Would you please provide the Dessalator US rep information? I was not aware they had one.  Thank you . Aldo

A55- Araucaria 

On Jul 23, 2019, at 11:46 AM, Alan Grayson <bazgrayson@...> wrote:

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Regards
Alan Grayson
SV Ora Pai
Annapolis, MD

eric freedman
 

Oliver, you can get the JIC fittings at any good hydraulic shop.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Oliver Henrichsen, SV Vela Nautica
Sent: Wednesday, July 31, 2019 11:37 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Dessslator HP hoses

 

Hi All,
I ran into same problem and the hose from high pressure pump came off before i could change my hoses.
Does anybody know how these terminals are caled? What kind of connector is that?
Since I learned here that the end fittings are reusable i will order the hoses in France.
Dessalator did not give a hint that I can reuse the fittings.

Oliver A54#39
Portugal

Sent from my Huawei Mobile



-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: "Aldo Roldan via Groups.Io"
To: main@amelyachtowners.groups.io
CC:


Alan.  Would you please provide the Dessalator US rep information? I was not aware they had one.  Thank you . Aldo

 

A55- Araucaria 


On Jul 23, 2019, at 11:46 AM, Alan Grayson <bazgrayson@...> wrote:

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Regards
Alan Grayson
SV Ora Pai
Annapolis, MD

Oliver Henrichsen, SV Vela Nautica
 

Thanks, the info about high pressure fittings helped to locate the type. In the end I ordered from Dessalator bcs of time issues.
But the original fittings on my D100 duo are worst. The are 316 inside but come with brass screw on for the outer part. If some saltwater (very likly on a watermaker) enters from the backside into the fitting it works as electrolyte between 316ss and brass part and eats it up until the hose slips out. There are pure 316 ss fittings on the market...
Lets see what they send my now?

Oliver from Vela Nautica
A54#39

Sent from my Huawei Mobile


-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: CW Bill Rouse
To: main@amelyachtowners.groups.io
CC:


Yes, the Dessalator High pressure fittings are "3/8 inch JIC stainless steel fittings". JIC fittings are a type of flare fitting which is machined with a 37-degree flare seating surface.  

Best,

CW Bill Rouse
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970



On Wed, Jul 31, 2019 at 10:37 AM Oliver Henrichsen, SV Vela Nautica <oliver.henrichsen@...> wrote:
Hi All,
I ran into same problem and the hose from high pressure pump came off before i could change my hoses.
Does anybody know how these terminals are caled? What kind of connector is that?
Since I learned here that the end fittings are reusable i will order the hoses in France.
Dessalator did not give a hint that I can reuse the fittings.

Oliver A54#39
Portugal

Sent from my Huawei Mobile


-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: "Aldo Roldan via Groups.Io"
To: main@amelyachtowners.groups.io
CC:


Alan.  Would you please provide the Dessalator US rep information? I was not aware they had one.  Thank you . Aldo

A55- Araucaria 

On Jul 23, 2019, at 11:46 AM, Alan Grayson <bazgrayson@...> wrote:

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Regards
Alan Grayson
SV Ora Pai
Annapolis, MD

Oliver Henrichsen, SV Vela Nautica
 

Eric, thanks,
It turned out to become a problem here in Faro, Portugal. JIC looks like its not so available in europe?

Oliver from Vela Nautica
A54#39
Faro, Portugal

Sent from my Huawei Mobile


-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: eric freedman
To: main@AmelYachtOwners.groups.io
CC:


Oliver, you can get the JIC fittings at any good hydraulic shop.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Oliver Henrichsen, SV Vela Nautica
Sent: Wednesday, July 31, 2019 11:37 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Dessslator HP hoses

 

Hi All,
I ran into same problem and the hose from high pressure pump came off before i could change my hoses.
Does anybody know how these terminals are caled? What kind of connector is that?
Since I learned here that the end fittings are reusable i will order the hoses in France.
Dessalator did not give a hint that I can reuse the fittings.

Oliver A54#39
Portugal

Sent from my Huawei Mobile



-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: "Aldo Roldan via Groups.Io"
To: main@amelyachtowners.groups.io
CC:


Alan.  Would you please provide the Dessalator US rep information? I was not aware they had one.  Thank you . Aldo

 

A55- Araucaria 


On Jul 23, 2019, at 11:46 AM, Alan Grayson <bazgrayson@...> wrote:

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Regards
Alan Grayson
SV Ora Pai
Annapolis, MD

eric freedman
 

The JIC is a designation of the connection. It does not necessarily have to be reusable. Most are not. I will bet that a hydraulic shop can make you the hoses with stainless steel fittings permanently pressed on.

Did you bring a hose to a bigger hydraulic shop?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Oliver Henrichsen, SV Vela Nautica
Sent: Thursday, August 01, 2019 3:53 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Dessslator HP hoses

 

Eric, thanks,
It turned out to become a problem here in Faro, Portugal. JIC looks like its not so available in europe?

Oliver from Vela Nautica
A54#39
Faro, Portugal

Sent from my Huawei Mobile



-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: eric freedman
To: main@AmelYachtOwners.groups.io
CC:


Oliver, you can get the JIC fittings at any good hydraulic shop.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Oliver Henrichsen, SV Vela Nautica
Sent: Wednesday, July 31, 2019 11:37 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Dessslator HP hoses

 

Hi All,
I ran into same problem and the hose from high pressure pump came off before i could change my hoses.
Does anybody know how these terminals are caled? What kind of connector is that?
Since I learned here that the end fittings are reusable i will order the hoses in France.
Dessalator did not give a hint that I can reuse the fittings.

Oliver A54#39
Portugal

Sent from my Huawei Mobile



-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: "Aldo Roldan via Groups.Io"
To: main@amelyachtowners.groups.io
CC:

Alan.  Would you please provide the Dessalator US rep information? I was not aware they had one.  Thank you . Aldo

 

A55- Araucaria 


On Jul 23, 2019, at 11:46 AM, Alan Grayson <bazgrayson@...> wrote:

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Regards
Alan Grayson
SV Ora Pai
Annapolis, MD

 

Eric is correct and JIC fittings are worldwide for hydraulic hoses.

Best,

CW Bill Rouse
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970



On Thu, Aug 1, 2019 at 6:55 PM eric freedman <kimberlite@...> wrote:

The JIC is a designation of the connection. It does not necessarily have to be reusable. Most are not. I will bet that a hydraulic shop can make you the hoses with stainless steel fittings permanently pressed on.

Did you bring a hose to a bigger hydraulic shop?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Oliver Henrichsen, SV Vela Nautica
Sent: Thursday, August 01, 2019 3:53 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Dessslator HP hoses

 

Eric, thanks,
It turned out to become a problem here in Faro, Portugal. JIC looks like its not so available in europe?

Oliver from Vela Nautica
A54#39
Faro, Portugal

Sent from my Huawei Mobile



-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: eric freedman
To: main@AmelYachtOwners.groups.io
CC:


Oliver, you can get the JIC fittings at any good hydraulic shop.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Oliver Henrichsen, SV Vela Nautica
Sent: Wednesday, July 31, 2019 11:37 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Dessslator HP hoses

 

Hi All,
I ran into same problem and the hose from high pressure pump came off before i could change my hoses.
Does anybody know how these terminals are caled? What kind of connector is that?
Since I learned here that the end fittings are reusable i will order the hoses in France.
Dessalator did not give a hint that I can reuse the fittings.

Oliver A54#39
Portugal

Sent from my Huawei Mobile



-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: "Aldo Roldan via Groups.Io"
To: main@amelyachtowners.groups.io
CC:

Alan.  Would you please provide the Dessalator US rep information? I was not aware they had one.  Thank you . Aldo

 

A55- Araucaria 


On Jul 23, 2019, at 11:46 AM, Alan Grayson <bazgrayson@...> wrote:

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Regards
Alan Grayson
SV Ora Pai
Annapolis, MD

Oliver Henrichsen, SV Vela Nautica
 

Eric,
Thank u very much for your help.
This time it was faster for us to order from Dessalator France.
1 day delivery time only.
We have been a bit in a hurry to get it working because we got visitors.
I think it might be better to get pure SS fittings. The originals are mix brass and SS and i ran in some electrolysis problems. Not sure if its the material mix or something else?

Thanks Oliver
Vela Nautica
A54#39
Portugal

Sent from my Huawei Mobile


-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: eric freedman
To: main@AmelYachtOwners.groups.io
CC:


The JIC is a designation of the connection. It does not necessarily have to be reusable. Most are not. I will bet that a hydraulic shop can make you the hoses with stainless steel fittings permanently pressed on.

Did you bring a hose to a bigger hydraulic shop?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Oliver Henrichsen, SV Vela Nautica
Sent: Thursday, August 01, 2019 3:53 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Dessslator HP hoses

 

Eric, thanks,
It turned out to become a problem here in Faro, Portugal. JIC looks like its not so available in europe?

Oliver from Vela Nautica
A54#39
Faro, Portugal

Sent from my Huawei Mobile



-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: eric freedman
To: main@AmelYachtOwners.groups.io
CC:


Oliver, you can get the JIC fittings at any good hydraulic shop.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Oliver Henrichsen, SV Vela Nautica
Sent: Wednesday, July 31, 2019 11:37 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Dessslator HP hoses

 

Hi All,
I ran into same problem and the hose from high pressure pump came off before i could change my hoses.
Does anybody know how these terminals are caled? What kind of connector is that?
Since I learned here that the end fittings are reusable i will order the hoses in France.
Dessalator did not give a hint that I can reuse the fittings.

Oliver A54#39
Portugal

Sent from my Huawei Mobile



-------- Original Message --------
Subject: Re: [AmelYachtOwners] Dessslator HP hoses
From: "Aldo Roldan via Groups.Io"
To: main@amelyachtowners.groups.io
CC:

Alan.  Would you please provide the Dessalator US rep information? I was not aware they had one.  Thank you . Aldo

 

A55- Araucaria 


On Jul 23, 2019, at 11:46 AM, Alan Grayson <bazgrayson@...> wrote:

Hi All, im about to order new HP hoses from the dessalator rep in the US. The end fittings are reusable and so you only need to buy the hose unless like me one of your ends are damaged.
There are 2 options for this.
1: buy the hose from France and any ends that you need. Hose $40 fittings $93.00 each, shipping $70
2: buy new hose and ends from the US. the hose is different and the fittings are slightly different with the same threaded ends. They are not interchangeable. Cost of 2 new hoses $472.00
I'm buying the hose and 1 end fitting from France.
If anyone else wants to buy either hoses or fittings from France and add to my order please let me know by Thurs 25th by noon eastern time. The order will be shipping to me in Annapolis and i'll forward from here if you pay shipping to your destination.
Regards
Alan Grayson
SV Ora Pai
Annapolis, MD