Marina ZZ bilge pump maintenance kit
|
Alan Grayson
Hi All, Does anyone know where to get the rebuild kits for the Reya Marina ZZ bilge pump. I got on the Reya website but if my translation is right they do not sell to individuals and a google search under their part numbers has not turned up any suppliers.
Regards Alan Grayson SM 406 Ora Pai St Michaels, MD |
|||||||
|
|
|||||||
|
Amel - sav@... recently had them for the Marina ZZ TF Marine makes an identical pump. It is either number TM-50 or TM-70...not sure. I cannot tell you where to find TF Marine spares, except at Amel...Amel replaced the reya pump with TF Marine. Best, CW Bill Rouse 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970 On Wed, Sep 11, 2019 at 2:33 PM Alan Grayson <bazgrayson@...> wrote: Hi All, Does anyone know where to get the rebuild kits for the Reya Marina ZZ bilge pump. I got on the Reya website but if my translation is right they do not sell to individuals and a google search under their part numbers has not turned up any suppliers. |
|||||||
|
|
|||||||
|
Alan I recently bought from Amel. The rubber valve is a reinforced new version ( see pic) 2 [03219] CLAPET ASPIRATION POMPE HENDERSON 72621/ Rubber valve for electric bilge pump E$17,42 each 34,84 plus VAT Rgds Roque Attika A54 117 Paraty Em qua, 11 de set de 2019 às 16:46, CW Bill Rouse <brouse@...> escreveu:
|
|||||||
|
|
|||||||
|
Alan Grayson
Perfect, thank you
toggle quoted message
Show quoted text
Alan From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Roque <ediroque@...>
Sent: Wednesday, 11 September 2019 7:55:41 PM To: main@amelyachtowners.groups.io <main@amelyachtowners.groups.io> Subject: Re: [AmelYachtOwners] Marina ZZ bilge pump maintenance kit Alan
I recently bought from Amel. The rubber valve is a reinforced new version ( see pic)
2 [03219] CLAPET ASPIRATION POMPE HENDERSON 72621/ Rubber valve for electric bilge pump E$17,42 each 34,84 plus VAT Rgds
Roque
Attika A54 117
Paraty
Em qua, 11 de set de 2019 às 16:46, CW Bill Rouse <brouse@...> escreveu:
|
|||||||
|
|
|||||||
|
Danny and Yvonne SIMMS
Hi, in the absence of a kit to hand I made copies of the flap valves out of thick insertion rubber. This a fibre reinforced rubber sheet. I found the replacements tended to take a curve and not seal well. I got about 5 years out of the ones I made. I have just installed a new diaphragm I made out of a suitable thickness insertion rubber sheet. I punched the centre hole, put it on the shaft, closed the pump on to it, held it there while I drilled the holes. Then bolted it up and trimmed around to outer size. Working well. I made a second while I was at it to put in spares. I have been carrying the insertion rubber sheet as spare for some years. If I get premature failure (which I doubt) Ill buy the replacement I could have bought one first up but I enjoy the process. Cruising again at last. At Volivoli, Viti Vevu Fiji. Had two magnificent dives with Wananuva dive this morning. Wow. Danny SM299 Ocean pearl Regards Danny On 12 September 2019 at 07:55 Roque <ediroque@...> wrote: |
|||||||
|
|
|||||||
|
eric freedman <kimberlite@...>
Hi, There are a number of insertion rubbers available made of different rubbers. What type did you use? What thickness did you use for the diaphragm and the flapper valves? Fair Winds Eric Kimberlite Amel Super Maramu #376
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Danny and Yvonne SIMMS
Sent: Wednesday, September 11, 2019 11:45 PM To: main@AmelYachtOwners.groups.io Subject: Re: [AmelYachtOwners] Marina ZZ bilge pump maintenance kit
Hi, in the absence of a kit to hand I made copies of the flap valves out of thick insertion rubber. This a fibre reinforced rubber sheet. I found the replacements tended to take a curve and not seal well. I got about 5 years out of the ones I made. I have just installed a new diaphragm I made out of a suitable thickness insertion rubber sheet. I punched the centre hole, put it on the shaft, closed the pump on to it, held it there while I drilled the holes. Then bolted it up and trimmed around to outer size. Working well. I made a second while I was at it to put in spares. I have been carrying the insertion rubber sheet as spare for some years. If I get premature failure (which I doubt) Ill buy the replacement I could have bought one first up but I enjoy the process. Cruising again at last. At Volivoli, Viti Vevu Fiji. Had two magnificent dives with Wananuva dive this morning. Wow. Danny SM299 Ocean pearl Regards Danny
|
|||||||
|
|
|||||||
|
Danny and Yvonne SIMMS
Hi Eric. Sorry for the delay in replying we are cruising in and put of email contact. I couldnt say the type of insertion rubber but i made the diaphragm out of 2mm. I thought of putting two in but didnt. I would think that 2x2mm would be more flexible than 1x 3mm. Anyway i will see how the 1x 2mm goes. The flap I made out of 3mm. Two thickneses glued together to give 6 on the flap, 3 at the flex hinge and 6 where the little bar is screwed through to locate it. The 6mm on the flap is much thicker than the standard so less prone to "curving". I got a special rubber cement to glue it but i am sorry my memory wont stretch 5 years. I would think that the glue out of a cycle tyre repair kit would do but what i got was reputed to be supeior. Hope this helps. Regards Danny SM 299 Ocean Pearl On 13 September 2019 at 12:37 eric freedman <kimberlite@...> wrote:
|
|||||||
|
|
|||||||
|
Dear fellows
If anyone needs a new pump or a maintenance kit, contact: info@... Francesca give me 6-8 weeks for a new pump: Diaphragm pump TM 50 24V DC 0,12Kw With body pump in PVC - 460 € Spare parts kit for TM 50 complete of: 2 membranes 2 valves 1 o-ring - 40 €
|
|||||||
|
|
|||||||
|
Sv Garulfo
Dear Amelians Just wanted to confirm my understanding after reading this thread - the TF Marine pump is identical to the amfa reya marina zz? - the maintenance kit provided by amel is a TF marine or marine ZZ? (Or are they the same?) - @jose, did you use the TF Marine kit on an Amfa marina zz or TF Marine pump? Thanks for your clarifications Regards Soraya Garulfo A54-122 Tahuata, Marquesas, French Polynesia On 16 Sep 2019, at 12:30, Jose Alegria <Josealegr@...> wrote:
Dear fellows If anyone needs a new pump or a maintenance kit, contact: info@... Francesca give me 6-8 weeks for a new pump: Diaphragm pump TM 50 24V DC 0,12Kw With body pump in PVC - 460 € Spare parts kit for TM 50 complete of: 2 membranes 2 valves 1 o-ring - 40 €
|
|||||||
|
|
|||||||
|
- the TF Marine pump is identical to the amfa reya marina zz? Very close with some subtle differences--- and all of the rebuild parts are identical. - the maintenance kit provided by amel is a TF marine or marine ZZ? (Or are they the same?) The careful answer is, "at one time, I am 99% sure that Amel supplied TF maintenance kits, but I am also 99% sure that Amel supplied some other brand kit which was the same size. --
On Sat, Nov 23, 2019 at 12:51 PM Sv Garulfo <svgarulfo@...> wrote:
|
|||||||
|
|
