Date
1 - 10 of 10
SM2000 - Have you replaced your dishwasher by a fridge/freezer? #galley
|
We are not using our dishwasher which is just taking space.
Have you replaced your dishwasher by a fridge/freezer? or something else? Any experience greatly appreciated Thanks Dominique Guenot sv Viva #374 Papeete, French Polynesia |
||||||||||||||
|
|
||||||||||||||
|
We ”replaced” our dishwasher, I built a freezer using polystyrene panels 10 cm in the sides, 15 cm in the bottom, in the top we used 13 cm. Total volume about 40 liters. As liner we used a ca 1 mm Polyethylene sheet that was easily formed with a heat gun. the compressor is cooled by circulating the freshwater, works excellent. Have not measured the energy it draws, but we notice that the compressor runs significant less time than the compressor for the front opening fridge. Temperature in the freezer around -10 C, can easily be down to -18 if one so wishes Paul on SY Kerpa SM #259 -- Skickat från Gmail Mobile |
||||||||||||||
|
|
||||||||||||||
|
Dear Paul, this is something I have been thinking of doing... Would you have any schematics / pictures / list of items you could share? Many thanks,
Guillaume Carpathia III - SM2K #293 Malta |
||||||||||||||
|
|
||||||||||||||
|
Guillaume, Eric SM Kimberlite also did this and posted some photos: Search under photos for "dishwasher" Here are a few photos: 
On Mon, Feb 24, 2020 at 9:25 AM Cathy & Guillaume via Groups.Io <carpathia3=yahoo.com@groups.io> wrote: Dear Paul, this is something I have been thinking of doing... Would you have any schematics / pictures / list of items you could share? Many thanks, |
||||||||||||||
|
|
||||||||||||||
|
Danny and Yvonne SIMMS
Hi Dominique, A PO put a top opening fridge in the space. Excellent. Danny SM 299 Ocean Pearl On 24 February 2020 at 17:19 Dominique Guenot <dom.guenot@...> wrote: |
||||||||||||||
|
|
||||||||||||||
|
Thanks Bill, I should have thought to go through the Photos treasure trove!
Would be interested in schematics or materials used if anyone has any (and of course Eric). Guillaume s/v Carpathia III – SM2K #293 |
||||||||||||||
|
|
||||||||||||||
|
I have some pictures on my blogg This is link to my first version with a metal lining, in Swedish but some pictures My next job was to replace the metal lining with a thermoplastic lining to reduce the energy consumption and condensation. I bought the thermoplastic lining on Amazon US . I found a lot of people made holsters for knifes and guns with that material. Blog now in English -- Skickat från Gmail Mobile |
||||||||||||||
|
|
||||||||||||||
|
You need to get that from Eric
On Mon, Feb 24, 2020 at 3:06 PM Cathy & Guillaume via Groups.Io <carpathia3=yahoo.com@groups.io> wrote:
|
||||||||||||||
|
|
||||||||||||||
|
This is great information and a good leg up
Thank you very much Paul, Danny and Bill |
||||||||||||||
|
|
||||||||||||||
|
These are great informations, thank you very much Paul, Danny and Bill.
. |
||||||||||||||
|
|
