Topics

SM2000 - Have you replaced your dishwasher by a fridge/freezer? #galley


Dominique Guenot
 

These are great informations, thank you very much Paul, Danny and Bill. 
.


Dominique Guenot
 

This is great information and a good leg up
Thank you very much Paul, Danny and Bill 


 

You need to get that from Eric
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ


On Mon, Feb 24, 2020 at 3:06 PM Cathy & Guillaume via Groups.Io <carpathia3=yahoo.com@groups.io> wrote:
Thanks Bill, I should have thought to go through the Photos treasure trove! 

Would be interested in schematics or materials used if anyone has any (and of course Eric).  

Guillaume

s/v Carpathia III – SM2K #293


Paul Osterberg
 

I have some pictures on my blogg
This is link to my first version with a metal lining, in Swedish but some pictures

My next job was to replace the metal lining with a thermoplastic lining to reduce the energy consumption and condensation. I bought the thermoplastic lining on Amazon US . I found a lot of people made holsters for knifes and guns with that material. Blog now in English 
--
Skickat från Gmail Mobile


Cathy & Guillaume
 

Thanks Bill, I should have thought to go through the Photos treasure trove! 

Would be interested in schematics or materials used if anyone has any (and of course Eric).  

Guillaume

s/v Carpathia III – SM2K #293


Danny and Yvonne SIMMS
 

Hi Dominique,

A PO put a top opening fridge in the space. Excellent.

Danny

SM 299

Ocean Pearl

On 24 February 2020 at 17:19 Dominique Guenot <dom.guenot@...> wrote:

We are not using our dishwasher which is just taking space.

Have you replaced your dishwasher by a fridge/freezer?  or something else? 

Any experience greatly appreciated 

Thanks  
Dominique Guenot 
sv Viva #374
Papeete, French Polynesia  


 

Guillaume,

Eric SM Kimberlite also did this and posted some photos: Search under photos for "dishwasher"

Here are a few photos:
image.png
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ


On Mon, Feb 24, 2020 at 9:25 AM Cathy & Guillaume via Groups.Io <carpathia3=yahoo.com@groups.io> wrote:
Dear Paul, this is something I have been thinking of doing... Would you have any schematics / pictures /  list of items you could share? Many thanks,

Guillaume
Carpathia III - SM2K #293
Malta


Cathy & Guillaume
 

Dear Paul, this is something I have been thinking of doing... Would you have any schematics / pictures /  list of items you could share? Many thanks,

Guillaume
Carpathia III - SM2K #293
Malta


Paul Osterberg
 

We ”replaced” our dishwasher, I built a freezer using polystyrene panels 10 cm in the sides, 15 cm in the bottom, in the top we used 13 cm. Total volume about 40 liters. As liner we used a ca 1 mm Polyethylene sheet that was easily formed with a heat gun. the compressor is cooled by circulating the freshwater, works excellent. Have not measured the energy it draws, but we notice that the compressor runs significant less time than the compressor for the front opening fridge. Temperature in the freezer around -10 C, can easily be down to -18 if one so wishes 
Paul on SY Kerpa SM #259
--
Skickat från Gmail Mobile


Dominique Guenot
 

We are not using our dishwasher which is just taking space.

Have you replaced your dishwasher by a fridge/freezer?  or something else? 

Any experience greatly appreciated 

Thanks  
Dominique Guenot 
sv Viva #374
Papeete, French Polynesia