Identifing parts for Onan water flange
|
Hello AMELians,
When ordering parts for the Onan generator some questions were coming up: - Which ground I required? The negative ground or isolated ground (PN# 300-5040 or 300-5041)? - The 12V and 24V Negative ground or 12V isolated ground (PN# 193-0318 or 193-0457-01)?
The Onan generator is Type 7MDKAV-2317 MDKAV 7 kW 50 Hz Diesel
Could someone help me on that or tell me how I could find that out?
Thanks in advance. Fair winds Olaf
S/V Katchopine, SM2K 392 currently in Trinidad
|
|||||||||||||
|
|
|||||||||||||
|
Olaf, Assuming that your Onan is the same that Amel installed and has not been modified, Amel ordered the 12 volt isolated ground version. If your current sensors have 2 wires, that are for the isolated ground version. Bill
On Tue, May 19, 2020 at 7:56 PM Olaf Bauer <olaf.bauer@...> wrote:
|
|||||||||||||
|
|
|||||||||||||
|
Thx Bill.
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of CW Bill Rouse
Sent: Mittwoch, 20. Mai 2020 10:09 To: main@AmelYachtOwners.groups.io Notification <main@amelyachtowners.groups.io> Subject: Re: [AmelYachtOwners] Identifing parts for Onan water flange
Olaf,
Assuming that your Onan is the same that Amel installed and has not been modified, Amel ordered the 12 volt isolated ground version. If your current sensors have 2 wires, that are for the isolated ground version.
Bill
On Tue, May 19, 2020 at 7:56 PM Olaf Bauer <olaf.bauer@...> wrote:
|
|||||||||||||
|
|
