|
Mark Erdos
I am wondering if someone who has
ordered or understands HP hoses for the water maker would be kind enough to
take a quick peek at this (before I push the buy button) and make sure this is
correct:
HT-06-ASB | 3/8" HYDRAULAX
TOUGH™ Hydraulic Hose Assembly
Code: HT-06-ASB
Fitting #1: SS-FJX-06-06 |
(Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)
Fitting #2: SS-FJX-06-06 |
(Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)
Overall Length: 3 feet 0
inches
These are about US$85 per 3’ hose assembled.
With best regards,
Mark
Skipper
Sailing Vessel - Cream Puff
www.creampuff.us
toggle quoted messageShow quoted text
From: Mark Erdos [mailto:mcerdos@...]
Sent: Tuesday, June 16, 2020 10:44 AM
To: 'AmelYachtOwners@groups.io'
Subject: Replacement HP hoses for Dessalator
A call out to USA owners,
I have a box of supplies being assembled in the USA for
shipment to Tahiti. I would like to include replacement HP hoses for the Amel
installed D60 Dessalator. I am unsure of the exact specs for the fittings
although I have searched the forum and think it is stainless steel 3/8 inch JIC
fittings on all ends. The stuff I am unsure about is if the hose has to be
“food grade” and the pressure rating.
Does anyone have a company from whom I can order on-line or
better still provide me with a part number and e-tailer?
I have an email out to balcen.com (the USA Dessalator
dealer) – I expect they supply it but am assuming it will be expensive
and other options might prove more thifty.
With best regards,
Mark
Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising - Tahiti, French Polynesia
www.creampuff.us
|
|
|
I do not know about the length. A SM with a D160 with membranes in the ceiling needs about 6' for each. Remember one hose is connected at the back of the control panel.
The rest looks good to me, just questioning length.
Bill
|
|
|
CW Bill Rouse
Amel Owners Yacht School
|
|
|
|
Address:
720 Winnie, Galveston Island, Texas 77550
|
|
|
|
On Tue, Jun 16, 2020 at 5:43 PM Mark Erdos < mcerdos@...> wrote:
I am wondering if someone who has
ordered or understands HP hoses for the water maker would be kind enough to
take a quick peek at this (before I push the buy button) and make sure this is
correct:
HT-06-ASB | 3/8" HYDRAULAX
TOUGH™ Hydraulic Hose Assembly
Code: HT-06-ASB
Fitting #1: SS-FJX-06-06 |
(Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)
Fitting #2: SS-FJX-06-06 |
(Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)
Overall Length: 3 feet 0
inches
These are about US$85 per 3’ hose assembled.
A call out to USA owners,
I have a box of supplies being assembled in the USA for
shipment to Tahiti. I would like to include replacement HP hoses for the Amel
installed D60 Dessalator. I am unsure of the exact specs for the fittings
although I have searched the forum and think it is stainless steel 3/8 inch JIC
fittings on all ends. The stuff I am unsure about is if the hose has to be
“food grade” and the pressure rating.
Does anyone have a company from whom I can order on-line or
better still provide me with a part number and e-tailer?
I have an email out to balcen.com (the USA Dessalator
dealer) – I expect they supply it but am assuming it will be expensive
and other options might prove more thifty.
With best regards,
Mark
Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising - Tahiti, French Polynesia
www.creampuff.us
|
|
|
karkauai
Hi Mark, That sounds right, but am not certain of the thread size, I would encourage you to insist on 316 stainless. Kent SM243 Kristy
On Jun 16, 2020 6:47 PM, Mark Erdos <mcerdos@...> wrote:
I am wondering if someone who has
ordered or understands HP hoses for the water maker would be kind enough to
take a quick peek at this (before I push the buy button) and make sure this is
correct:
HT-06-ASB | 3/8" HYDRAULAX
TOUGH™ Hydraulic Hose Assembly
Code: HT-06-ASB
Fitting #1: SS-FJX-06-06 |
(Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)
Fitting #2: SS-FJX-06-06 |
(Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)
Overall Length: 3 feet 0
inches
These are about US$85 per 3’ hose assembled.
With best regards,
Mark
Skipper
Sailing Vessel - Cream Puff
www.creampuff.us
From: Mark Erdos [mailto:mcerdos@...]
Sent: Tuesday, June 16, 2020 10:44 AM
To: 'AmelYachtOwners@groups.io'
Subject: Replacement HP hoses for Dessalator
A call out to USA owners,
I have a box of supplies being assembled in the USA for
shipment to Tahiti. I would like to include replacement HP hoses for the Amel
installed D60 Dessalator. I am unsure of the exact specs for the fittings
although I have searched the forum and think it is stainless steel 3/8 inch JIC
fittings on all ends. The stuff I am unsure about is if the hose has to be
“food grade” and the pressure rating.
Does anyone have a company from whom I can order on-line or
better still provide me with a part number and e-tailer?
I have an email out to balcen.com (the USA Dessalator
dealer) – I expect they supply it but am assuming it will be expensive
and other options might prove more thifty.
With best regards,
Mark
Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising - Tahiti, French Polynesia
www.creampuff.us
|
|
|
Mark Erdos
Thanks Bill and Kent!
Bill, I just
put in 3’ so I could get a rough cost. I haven’t actually measured it yet. You’re
very observant.
With best
regards,
Mark
Skipper
Sailing Vessel
- Cream Puff - SM2K - #275
Currently
cruising - Tahiti, French Polynesia
www.creampuff.us
From:
main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On
Behalf Of CW Bill Rouse
Sent: Tuesday, June 16, 2020 12:59 PM
To: main@AmelYachtOwners.groups.io Notification
Subject: Re: [AmelYachtOwners] FW: Replacement HP hoses for Dessalator -
UPDATE
I do not
know about the length. A SM with a D160 with membranes in the ceiling needs
about 6' for each. Remember one hose is connected at the back of the control
panel.
The rest
looks good to me, just questioning length.
|
|
|
CW Bill Rouse Amel Owners Yacht School
|
|
|
|
Address: 720 Winnie, Galveston Island, Texas
77550
|
|
|
|
|
|
toggle quoted messageShow quoted text
On Tue, Jun 16, 2020 at 5:43 PM Mark Erdos < mcerdos@...> wrote:
I am wondering if someone who has
ordered or understands HP hoses for the water maker would be kind enough to
take a quick peek at this (before I push the buy button) and make sure this is
correct:
HT-06-ASB | 3/8" HYDRAULAX TOUGH™
Hydraulic Hose Assembly
Code: HT-06-ASB
Fitting #1: SS-FJX-06-06 | (Stainless)3/8" JIC 37°
Flare Female Swivel (SS-FJX-06-06)
Fitting #2: SS-FJX-06-06 | (Stainless)3/8" JIC 37°
Flare Female Swivel (SS-FJX-06-06)
Overall Length: 3 feet 0 inches
These
are about US$85 per 3’ hose assembled.
A
call out to USA owners,
I
have a box of supplies being assembled in the USA for shipment to Tahiti. I
would like to include replacement HP hoses for the Amel installed D60
Dessalator. I am unsure of the exact specs for the fittings although I have
searched the forum and think it is stainless steel 3/8 inch JIC fittings on all
ends. The stuff I am unsure about is if the hose has to be “food grade” and the
pressure rating.
Does
anyone have a company from whom I can order on-line or better still provide me
with a part number and e-tailer?
I
have an email out to balcen.com
(the USA Dessalator dealer) – I expect they supply it but am assuming it will
be expensive and other options might prove more thifty.
With
best regards,
Mark
Skipper
Sailing
Vessel - Cream Puff - SM2K - #275
Currently
cruising - Tahiti, French Polynesia
www.creampuff.us
|
|
|
karkauai
On Kristy, 3ft would be enough, 4 would be better.
On Jun 16, 2020 10:26 PM, Mark Erdos <mcerdos@...> wrote:
Thanks Bill and Kent!
Bill, I just
put in 3’ so I could get a rough cost. I haven’t actually measured it yet. You’re
very observant.
With best
regards,
Mark
Skipper
Sailing Vessel
- Cream Puff - SM2K - #275
Currently
cruising - Tahiti, French Polynesia
www.creampuff.us
From:
main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On
Behalf Of CW Bill Rouse
Sent: Tuesday, June 16, 2020 12:59 PM
To: main@AmelYachtOwners.groups.io Notification
Subject: Re: [AmelYachtOwners] FW: Replacement HP hoses for Dessalator -
UPDATE
I do not
know about the length. A SM with a D160 with membranes in the ceiling needs
about 6' for each. Remember one hose is connected at the back of the control
panel.
The rest
looks good to me, just questioning length.
|
|
|
CW Bill Rouse Amel Owners Yacht School
| | |
|
Address: 720 Winnie, Galveston Island, Texas
77550
| |
|
| | |
On Tue, Jun 16, 2020 at 5:43 PM Mark Erdos <mcerdos@...> wrote:
I am wondering if someone who has
ordered or understands HP hoses for the water maker would be kind enough to
take a quick peek at this (before I push the buy button) and make sure this is
correct:
HT-06-ASB | 3/8" HYDRAULAX TOUGH™
Hydraulic Hose Assembly
Code: HT-06-ASB
Fitting #1: SS-FJX-06-06 | (Stainless)3/8" JIC 37°
Flare Female Swivel (SS-FJX-06-06)
Fitting #2: SS-FJX-06-06 | (Stainless)3/8" JIC 37°
Flare Female Swivel (SS-FJX-06-06)
Overall Length: 3 feet 0 inches
These
are about US$85 per 3’ hose assembled.
A
call out to USA owners,
I
have a box of supplies being assembled in the USA for shipment to Tahiti. I
would like to include replacement HP hoses for the Amel installed D60
Dessalator. I am unsure of the exact specs for the fittings although I have
searched the forum and think it is stainless steel 3/8 inch JIC fittings on all
ends. The stuff I am unsure about is if the hose has to be “food grade” and the
pressure rating.
Does
anyone have a company from whom I can order on-line or better still provide me
with a part number and e-tailer?
I
have an email out to balcen.com
(the USA Dessalator dealer) – I expect they supply it but am assuming it will
be expensive and other options might prove more thifty.
With
best regards,
Mark
Skipper
Sailing
Vessel - Cream Puff - SM2K - #275
Currently
cruising - Tahiti, French Polynesia
www.creampuff.us
|
|
|
Matt Salatino
Should be OK if 3/8” is indeed the fitting size you need. A 3/8” fitting is larger than 3/8”. You can google NPT fitting dimensions. On previous boat, only one fitting swiveled. Both swiveling is OK, a bit easier to assemble. ~~~⛵️~~~Matt
On Jun 17, 2020, at 12:47 AM, Mark Erdos < mcerdos@...> wrote:
I am wondering if someone who has
ordered or understands HP hoses for the water maker would be kind enough to
take a quick peek at this (before I push the buy button) and make sure this is
correct:
HT-06-ASB | 3/8" HYDRAULAX
TOUGH™ Hydraulic Hose Assembly
Code: HT-06-ASB
Fitting #1: SS-FJX-06-06 |
(Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)
Fitting #2: SS-FJX-06-06 |
(Stainless)3/8" JIC 37° Flare Female Swivel (SS-FJX-06-06)
Overall Length: 3 feet 0
inches
These are about US$85 per 3’ hose assembled.
<image001.jpg>
A call out to USA owners,
I have a box of supplies being assembled in the USA for
shipment to Tahiti. I would like to include replacement HP hoses for the Amel
installed D60 Dessalator. I am unsure of the exact specs for the fittings
although I have searched the forum and think it is stainless steel 3/8 inch JIC
fittings on all ends. The stuff I am unsure about is if the hose has to be
“food grade” and the pressure rating.
Does anyone have a company from whom I can order on-line or
better still provide me with a part number and e-tailer?
I have an email out to balcen.com (the USA Dessalator
dealer) – I expect they supply it but am assuming it will be expensive
and other options might prove more thifty.
With best regards,
Mark
Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising - Tahiti, French Polynesia
www.creampuff.us
|
|
|
Steve Bell s/y Dusk SM378
Hi i just replaced mine. Did the same as Bill's suggestion took off old hose took it to hydraulic hose shop told them it was for my watermaker so they made one up in 30 mins same length with stainless steel fittings 50 euro later all sorted. Regards Steve
|
|
|
