SM Hawse pipe
|
Danny and Yvonne SIMMS
Looks good. Mine was too far gone to reuse any of it. Danny SM 299 Ocean Pearl On 24 June 2020 at 17:57 Dennis Campbell <dennis@...> wrote: |
|
|
|
Dennis Campbell
Have just completed the same task on Pegasus (Maramu #178). Cut out rusted section leaving 4" (100mm) top and bottom stub ends of original pipe. Replaced damaged section with 3" (75mm) gal pipe with sliding 3 1/2" collars fitting over each stub end to keep new hawes pipe in position. Then glassed over to secure.
|
|
|
|
Germain Jean-Pierre
Hi Danny,
toggle quoted message
Show quoted text
Your hammer is very creative. :-) Jean-Pierre Germain, SY Eleuthera, SM 007 On 24 Jun 2020, at 14:10, Danny and Yvonne SIMMS <simms@...> wrote:
|
|
|
|
Danny and Yvonne SIMMS
Hi all. I have arrived where all us SM oweners will some time and am replacing the hawse pipe from the deck through the port deck locker. The old mild steel on didnt look too bad till I hit it with a hammer and all the rust fell off. See the attached photo of the old pipe and my new stainless pipe ready to be glassed in. Danny SM 299 Ocean Pearl 
|
|
|