Topics

Onan Generator exhaust temperature switch - great price.


eric freedman
 

Hi Vladimir,

Did I sent the switch to you?

I have them here.

Fair Winds

Eric

Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of eric freedman
Sent: Thursday, October 01, 2020 5:46 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Onan Generator exhaust temperature switch - great price.

 

Hi Vladimir,

Please send me a check for $34.00 for 1 switch.

The switches are on the way to me and I will send 1 to you

as soon as they arrive.

Fair Winds

Eric

 

Eric Freedman

345 New York Ave

Huntington, NY 11743

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of VLADIMIR SONSEV
Sent: Monday, August 10, 2020 9:11 AM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Onan Generator exhaust temperature switch - great price.

 

Hi Eric,

 

I want to buy one. Please provide instructors for payment.

 

Vladimir

202 258 1916

 

SM 345 " LIFE IS GOOD"

On Tue, Jul 28, 2020, 8:37 PM eric freedman <kimberlite@...> wrote:

I have broken a few of these switches over the years. I have done this by reaching over the generator to retrieve something stored behind the genset.

I received a quote from my Onan dealer and on Amazon for around $90- plus tax which is ridiculous.

I tracked down the OEM manufacturer and the cost is about $23- plus a one time set up fee of about $50- I plan on ordering 2 of these. They stated that they make this for ONAN. If anyone is interested please let me know and I can order them for you $33- each plus USPS of about $8.00.

I will order the switches within a week.

Fair Winds,

Eric

SM 376 Kimberlite 


eric freedman
 

Hi Vladimir,

Please send me a check for $34.00 for 1 switch.

The switches are on the way to me and I will send 1 to you

as soon as they arrive.

Fair Winds

Eric

 

Eric Freedman

345 New York Ave

Huntington, NY 11743

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of VLADIMIR SONSEV
Sent: Monday, August 10, 2020 9:11 AM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Onan Generator exhaust temperature switch - great price.

 

Hi Eric,

 

I want to buy one. Please provide instructors for payment.

 

Vladimir

202 258 1916

 

SM 345 " LIFE IS GOOD"

On Tue, Jul 28, 2020, 8:37 PM eric freedman <kimberlite@...> wrote:

I have broken a few of these switches over the years. I have done this by reaching over the generator to retrieve something stored behind the genset.

I received a quote from my Onan dealer and on Amazon for around $90- plus tax which is ridiculous.

I tracked down the OEM manufacturer and the cost is about $23- plus a one time set up fee of about $50- I plan on ordering 2 of these. They stated that they make this for ONAN. If anyone is interested please let me know and I can order them for you $33- each plus USPS of about $8.00.

I will order the switches within a week.

Fair Winds,

Eric

SM 376 Kimberlite 


 


There are two versions of the elbow sensor on Onan generators on Super Maramus. 

Some Onan models have part 309-0295-01 which is Normally Closed. Other models have part
309-0295 is Normally Open. Which sensor you have depends on your Onan Model and Serial. Check the
parts manual for your model to determine how to test this sensor. Or call your Cummins/Onan dealer with
your model and serial number. Remember there are a number of sensors in the shutdown system, and
these switches will fail. I replaced the exhaust manifold temperature switch and the water-flow switch
because of an accumulation of debris inside. I also had one situation with a loose connection on a switch.
Did you use your laser temperature gun to measure temperature? The normal temperature of the exhaust
elbow is about 50C and the normal temperature of the coolant is about 80C. Were these in range? How
many hours since the last impeller change? Should be less than 300hrs or 12 months. The impeller blades
can look OK, but the impeller can be defective.


CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Tue, Sep 1, 2020 at 4:32 PM eric freedman <kimberlite@...> wrote:

Hi Mike,

I believe if the exhaust temperature at the sensor exceeds 230 degrees F. the genset shuts down.

I will do an experiment one day and disconnect one wire while the genset is running and see what  happens.

Fair Winds

Eric

Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Mike Longcor (SV Trilogy)
Sent: Tuesday, July 28, 2020 10:41 PM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Onan Generator exhaust temperature switch - great price.

 

Thanks Eric. Sent you a message with order details.

 

When these fail, go bad, or break, how do you know? Does it prevent the genset from starting/running? Or does it allow the genset to overheat if there are issues with the cooling system (broken impeller for example) and potentially damage things?

 

Cheers,

Mike Longcor

SV Trilogy SM23

Opua, NZ

 


eric freedman
 

Hi Mike,

I believe if the exhaust temperature at the sensor exceeds 230 degrees F. the genset shuts down.

I will do an experiment one day and disconnect one wire while the genset is running and see what  happens.

Fair Winds

Eric

Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Mike Longcor (SV Trilogy)
Sent: Tuesday, July 28, 2020 10:41 PM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Onan Generator exhaust temperature switch - great price.

 

Thanks Eric. Sent you a message with order details.

 

When these fail, go bad, or break, how do you know? Does it prevent the genset from starting/running? Or does it allow the genset to overheat if there are issues with the cooling system (broken impeller for example) and potentially damage things?

 

Cheers,

Mike Longcor

SV Trilogy SM23

Opua, NZ

 


eric freedman
 

Hi Jim,

I am still compiling a list of people who want the switch.

I believe you have a mdkav generator . This is the switch for thet generator.

Fair Winds

Eric

Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Jim Anderson
Sent: Thursday, July 30, 2020 11:14 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Onan Generator exhaust temperature switch - great price.

 

Eric,

I won’t be aboard to tell witch model I have until 04 August. If ordering before then, then please cancel my order for 1 unit. Otherwise I’ll reply further on Wednesday. Thanks for doing this for the group,

 

Jim

SM384 Sirena Azul

Seattle


VLADIMIR SONSEV
 

Hi Eric,

I want to buy one. Please provide instructors for payment.

Vladimir
202 258 1916

SM 345 " LIFE IS GOOD"


On Tue, Jul 28, 2020, 8:37 PM eric freedman <kimberlite@...> wrote:

I have broken a few of these switches over the years. I have done this by reaching over the generator to retrieve something stored behind the genset.

I received a quote from my Onan dealer and on Amazon for around $90- plus tax which is ridiculous.

I tracked down the OEM manufacturer and the cost is about $23- plus a one time set up fee of about $50- I plan on ordering 2 of these. They stated that they make this for ONAN. If anyone is interested please let me know and I can order them for you $33- each plus USPS of about $8.00.

I will order the switches within a week.

Fair Winds,

Eric

SM 376 Kimberlite 


Jim Anderson
 

Eric,  Just following up to see if you need $. I've been tied up for awhile & hope I didn't miss the boat..  Jim SM384 Sirena Azul


rossirossix4
 

I'll take one.  Bob Rossi, KAIMI  SM 429


Jim Anderson
 

Eric,
Please confirm me for 1 unit, per Bill's knowledge.
Bill, thank you.
Jim
SM384 Sirena Azul
Seattle


 

Jim, 

If original SM 384 has normally closed, part number 309-0295-01

Best,

CW Bill Rouse 
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550 
www.AmelOwnersYachtSchool.com 
Yacht School Calendar: www.preparetocastoff.blogspot.com/p/calendar.html


   

On Thu, Jul 30, 2020, 10:14 AM Jim Anderson <capt.anderson@...> wrote:

Eric,

I won’t be aboard to tell witch model I have until 04 August. If ordering before then, then please cancel my order for 1 unit. Otherwise I’ll reply further on Wednesday. Thanks for doing this for the group,

 

Jim

SM384 Sirena Azul

Seattle


Jim Anderson
 

Eric,

I won’t be aboard to tell witch model I have until 04 August. If ordering before then, then please cancel my order for 1 unit. Otherwise I’ll reply further on Wednesday. Thanks for doing this for the group,

 

Jim

SM384 Sirena Azul

Seattle


karkauai
 

Hi Eric,
Cancel my order, mine are normally open. I have a 1999 6.5KW MDKAL Onan. I guess that means if they fail to close, my engine gets hot and doesn't shut down. Both times mine failed closed and the engine would start up and immediately shut down. Once it was intermittent and difficult to diagnose.

Thanks anyway, and cancel the three I ordered.  If it's too late, let me know.  If your guy can make the normally open ones, I'd be interested.

Kent
SM 243
Kristy


On Jul 29, 2020 1:13 AM, eric freedman <kimberlite@...> wrote:
Mike,
These are simple thermal switches. They are normally closed.
If the circuit opens up the genset stops.
My problem is sometimes they burn out and other times I hit the switch and it separates.
Fair Winds,
Eric

On July 28, 2020 at 10:41 PM "Mike Longcor (SV Trilogy)" <svtrilogy53@...> wrote:

Thanks Eric. Sent you a message with order details.

When these fail, go bad, or break, how do you know? Does it prevent the genset from starting/running? Or does it allow the genset to overheat if there are issues with the cooling system (broken impeller for example) and potentially damage things?

Cheers,
Mike Longcor
SV Trilogy SM23
Opua, NZ


 


 

It would, but earlier Onan generators use the other one. I don't know the Onan model and year changeover, but it did happen. 

Best,

CW Bill Rouse 
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550 
www.AmelOwnersYachtSchool.com 
Yacht School Calendar: www.preparetocastoff.blogspot.com/p/calendar.html


   

On Wed, Jul 29, 2020, 12:35 PM Mark Pitt <mark_pitt@...> wrote:

My Onan MDKAV uses 309-0295-01, the part that is in Eric's photo.

   Mark Pitt

  Sabbatical III, SM#419, Rhode Island, USA

On 7/29/2020 10:05 AM, CW Bill Rouse wrote:
WAIT and read this before you order!

Not all Onan Generators in all SMs and 54s are created equally. Use your ohmmeter to check for continuity between the terminals on the temperature sensor on the exhaust elbow. Some Onan models have part 309-0295-01 which is Normally Closed. Other models have part 309-0295 is Normally Open. Which sensor you have depends on your Onan Model and Serial. Check the parts manual for your model to determine how to test this sensor. Or call your Cummins/Onan dealer with your model and serial number.

Good to know: The normal temperature of the exhaust elbow is about 50C and the normal temperature of the coolant is about 80C. Were these in range? How many hours since the last impeller change? Should be less than 300hrs or 12 months. The impeller blades can look OK, but the impeller can be defective. You can have some water flow, but not enough to keep the elbow below about 70C (the approximate cut-off temp).

Also, remember there are a number of sensors in the shutdown system, and these switches will fail. I replaced the exhaust manifold temperature switch and the water-flow switch because of an accumulation of debris inside. I also had one situation with a loose connection on a switch. Did you use your laser temperature gun to measure temperature? 

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

View My Training Calendar


On Wed, Jul 29, 2020 at 4:02 AM Mark Pitt <mark_pitt@...> wrote:
Eric,

I will order one.  I have never had an issue with mine but you never know.  Thanks for doing this.
Best,
Mark
Sabbatical III, Sm#419, Rhode Island, USA


On Jul 29, 2020, at 1:13 AM, eric freedman <kimberlite@...> wrote:

 Mike,
These are simple thermal switches. They are normally closed.
If the circuit opens up the genset stops.
My problem is sometimes they burn out and other times I hit the switch and it separates.
Fair Winds,
Eric

On July 28, 2020 at 10:41 PM "Mike Longcor (SV Trilogy)" <svtrilogy53@...> wrote:

Thanks Eric. Sent you a message with order details.

When these fail, go bad, or break, how do you know? Does it prevent the genset from starting/running? Or does it allow the genset to overheat if there are issues with the cooling system (broken impeller for example) and potentially damage things?

Cheers,
Mike Longcor
SV Trilogy SM23
Opua, NZ


 


Mark Pitt
 

My Onan MDKAV uses 309-0295-01, the part that is in Eric's photo.

   Mark Pitt

  Sabbatical III, SM#419, Rhode Island, USA

On 7/29/2020 10:05 AM, CW Bill Rouse wrote:
WAIT and read this before you order!

Not all Onan Generators in all SMs and 54s are created equally. Use your ohmmeter to check for continuity between the terminals on the temperature sensor on the exhaust elbow. Some Onan models have part 309-0295-01 which is Normally Closed. Other models have part 309-0295 is Normally Open. Which sensor you have depends on your Onan Model and Serial. Check the parts manual for your model to determine how to test this sensor. Or call your Cummins/Onan dealer with your model and serial number.

Good to know: The normal temperature of the exhaust elbow is about 50C and the normal temperature of the coolant is about 80C. Were these in range? How many hours since the last impeller change? Should be less than 300hrs or 12 months. The impeller blades can look OK, but the impeller can be defective. You can have some water flow, but not enough to keep the elbow below about 70C (the approximate cut-off temp).

Also, remember there are a number of sensors in the shutdown system, and these switches will fail. I replaced the exhaust manifold temperature switch and the water-flow switch because of an accumulation of debris inside. I also had one situation with a loose connection on a switch. Did you use your laser temperature gun to measure temperature? 

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

View My Training Calendar


On Wed, Jul 29, 2020 at 4:02 AM Mark Pitt <mark_pitt@...> wrote:
Eric,

I will order one.  I have never had an issue with mine but you never know.  Thanks for doing this.
Best,
Mark
Sabbatical III, Sm#419, Rhode Island, USA


On Jul 29, 2020, at 1:13 AM, eric freedman <kimberlite@...> wrote:

 Mike,
These are simple thermal switches. They are normally closed.
If the circuit opens up the genset stops.
My problem is sometimes they burn out and other times I hit the switch and it separates.
Fair Winds,
Eric

On July 28, 2020 at 10:41 PM "Mike Longcor (SV Trilogy)" <svtrilogy53@...> wrote:

Thanks Eric. Sent you a message with order details.

When these fail, go bad, or break, how do you know? Does it prevent the genset from starting/running? Or does it allow the genset to overheat if there are issues with the cooling system (broken impeller for example) and potentially damage things?

Cheers,
Mike Longcor
SV Trilogy SM23
Opua, NZ


 


 

WAIT and read this before you order!

Not all Onan Generators in all SMs and 54s are created equally. Use your ohmmeter to check for continuity between the terminals on the temperature sensor on the exhaust elbow. Some Onan models have part 309-0295-01 which is Normally Closed. Other models have part 309-0295 is Normally Open. Which sensor you have depends on your Onan Model and Serial. Check the parts manual for your model to determine how to test this sensor. Or call your Cummins/Onan dealer with your model and serial number.

Good to know: The normal temperature of the exhaust elbow is about 50C and the normal temperature of the coolant is about 80C. Were these in range? How many hours since the last impeller change? Should be less than 300hrs or 12 months. The impeller blades can look OK, but the impeller can be defective. You can have some water flow, but not enough to keep the elbow below about 70C (the approximate cut-off temp).

Also, remember there are a number of sensors in the shutdown system, and these switches will fail. I replaced the exhaust manifold temperature switch and the water-flow switch because of an accumulation of debris inside. I also had one situation with a loose connection on a switch. Did you use your laser temperature gun to measure temperature? 

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Wed, Jul 29, 2020 at 4:02 AM Mark Pitt <mark_pitt@...> wrote:
Eric,

I will order one.  I have never had an issue with mine but you never know.  Thanks for doing this.
Best,
Mark
Sabbatical III, Sm#419, Rhode Island, USA


On Jul 29, 2020, at 1:13 AM, eric freedman <kimberlite@...> wrote:

 Mike,
These are simple thermal switches. They are normally closed.
If the circuit opens up the genset stops.
My problem is sometimes they burn out and other times I hit the switch and it separates.
Fair Winds,
Eric

On July 28, 2020 at 10:41 PM "Mike Longcor (SV Trilogy)" <svtrilogy53@...> wrote:

Thanks Eric. Sent you a message with order details.

When these fail, go bad, or break, how do you know? Does it prevent the genset from starting/running? Or does it allow the genset to overheat if there are issues with the cooling system (broken impeller for example) and potentially damage things?

Cheers,
Mike Longcor
SV Trilogy SM23
Opua, NZ


 


Michael & Robyn
 

Hi Eric,

please count me in for three of these sensors. I just replaced the rubber hose coupling between the exhaust elbow and the pipe leading outside of the onan box and could see that the sensor contacts are very corroded.
--
Michael & Robyn

SY RIPPLE SM2K # 417
currently in CYB Cambridge MD USA


Jim Anderson
 

Hi Eric, 
Please put me down for one.
Thanks,
Jim
SM384 Sirena Azul
Seattle


Craig Briggs
 
Edited

Online here for $48. or use their $13.20 one with spade connectors rather than screw. 
http://senasys.com/fan-limit-temperature-switch-generators
--
SN68 Sangaris, Tropic Isle Harbor, FL


Alan Grayson
 

Hi Eric, I'll take 2.
Regards
Alan Grayson
SM 406 Ora Pai
Lancaster Virginia


From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of eric freedman <kimberlite@...>
Sent: Wednesday, 29 July 2020 12:37 AM
To: Amel Owners <main@amelyachtowners.groups.io>
Subject: [AmelYachtOwners] Onan Generator exhaust temperature switch - great price.
 

I have broken a few of these switches over the years. I have done this by reaching over the generator to retrieve something stored behind the genset.

I received a quote from my Onan dealer and on Amazon for around $90- plus tax which is ridiculous.

I tracked down the OEM manufacturer and the cost is about $23- plus a one time set up fee of about $50- I plan on ordering 2 of these. They stated that they make this for ONAN. If anyone is interested please let me know and I can order them for you $33- each plus USPS of about $8.00.

I will order the switches within a week.

Fair Winds,

Eric

SM 376 Kimberlite 


Mark Pitt
 

Eric,

I will order one.  I have never had an issue with mine but you never know.  Thanks for doing this.
Best,
Mark
Sabbatical III, Sm#419, Rhode Island, USA


On Jul 29, 2020, at 1:13 AM, eric freedman <kimberlite@...> wrote:

 Mike,
These are simple thermal switches. They are normally closed.
If the circuit opens up the genset stops.
My problem is sometimes they burn out and other times I hit the switch and it separates.
Fair Winds,
Eric

On July 28, 2020 at 10:41 PM "Mike Longcor (SV Trilogy)" <svtrilogy53@...> wrote:

Thanks Eric. Sent you a message with order details.

When these fail, go bad, or break, how do you know? Does it prevent the genset from starting/running? Or does it allow the genset to overheat if there are issues with the cooling system (broken impeller for example) and potentially damage things?

Cheers,
Mike Longcor
SV Trilogy SM23
Opua, NZ