Date
1 - 4 of 4
Backstay Tension A54
|
Hi Martin,
Thank you. I will send an email to Franck. best regards Dean
|
||||||||||||||||||||
|
|
||||||||||||||||||||
|
Hello Dean,
|
||||||||||||||||||||
|
|
||||||||||||||||||||
|
Hello Dean,
From Franck Chivée, La Rochelle, Greement, I got the numbers you can see in the sheet. I got thenumbers when he checked our rigging. Franck Chivée is a rigger and very familiar with Amel and Amel rigs. As the backstays of the Amel 54 are 7 mm thick, the tension should be between 600 and 800 kg.
Franck's figures are based on the values that Selden recommends.
The best will be to ask him. You can contact Franck by e-mail: larochellegreement@...
The numbers are for 1/19 wires.
Regards Martin
SY Mago del Sur - 54#40
|
||||||||||||||||||||
|
|
||||||||||||||||||||
|
I had to disconnect my back stays for the lifting in 2019 and launching of Stella last week. I'm sure the tension is not the same as it was originally. Does anyone know the (numerical) tension they should be reset to? Maybe someone has a full rig tensioning specification for the A54?
|
||||||||||||||||||||
|
|