Hydraulic hose specs- ZF 25 2.8 to Bowman DC60XCC


 

I am fairly certain the fitting is the same fitting Dessalator uses which is JIC. The size is 3/8 inch. This is a common fitting. 

Best,

CW Bill Rouse 
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550 
www.AmelOwnersYachtSchool.com 
Yacht School Calendar: www.preparetocastoff.blogspot.com/p/calendar.html


   

On Fri, Sep 17, 2021, 7:23 PM Bill Kinney <cruisingconsulting@...> wrote:
Tom,

I’d go with the local hydraulic guy.  We have had good luck with them everywhere we have traveled and needed the service.  Hydraulics are really common on boats and equipment of all kinds, and the tools to make custom hoses are everywhere.

Bill Kinney
Sm160, Harmonie
Annapolis, MD, USA


Bill Kinney
 

Tom,

I’d go with the local hydraulic guy.  We have had good luck with them everywhere we have traveled and needed the service.  Hydraulics are really common on boats and equipment of all kinds, and the tools to make custom hoses are everywhere.

Bill Kinney
Sm160, Harmonie
Annapolis, MD, USA


Thomas Kleman
 

Im looking to get spare hydraulic hoses for my new trans oil cooler. Both the trans and the oil cooler have fittings allowing for a hose with 2 female ends which I think might be 3/8 inch BSPP. As I attempted to order online I was overwhelmed by the 30 or so different end fittings available. Does anyone know the precise spec for this hose ?

Plan B is to take the hose to a local French hydraulics guy but that makes me nervous.

Tom and Kirstin
SM2K 422
SV L'ORIENT
Papeete, Tahiti