1. AmelYachtOwners | Main
  2. Topics

Goiot hatch seals

Lance Leonard
 

Time to replace the portlight and hatch seals on Minerva, Maramu #135. I looked in the wiki-how on this site, but the attachment with Bill Rouse’s response to a similar question was deleted. Does anyone have a source? Getting kind of weepy over my stove.
Lance Leonard
S/V Minerva
Currently Cruising Downeast Maine
CW Bill Rouse
 

I think you might have the Tradition Series. Start by downloading the following:

 Goiot Distributors.pdf

 Goiot Tradition Hatches Catalog.pdf



CW Bill Rouse Amel Owners Yacht School
720 Winnie, Galveston Island, Texas 77550 
   


On Wed, Aug 3, 2022 at 10:26 AM Lance Leonard <Elscubano@...> wrote:
Time to replace the portlight and hatch seals on Minerva, Maramu #135. I looked in the wiki-how on this site, but the attachment with Bill Rouse’s response to a similar question was deleted. Does anyone have a source? Getting kind of weepy over my stove.
Lance Leonard
S/V Minerva
Currently Cruising Downeast Maine

Mike Longcor (SV Trilogy)
 

Hi Lance,

If they are tradition portlights, the seal is 8mm diameter round EPDM foam. Here's one website that can supply it: https://www.international-boat-spares.com/en/gaskets-for-hatches-portlights/703-gasket-integration-tradition-hacth-tradition-cristal-portlight-old-hatch.html

They also have the tradition hatch gaskets, which is a trapezoid shaped profile.

The dimensions are given so you could try and source this stuff elsewhere. The hatch gasket could be tricky given it's profile. But 8mm diameter round gasket is common.

Hope this helps.
Cheers,
Mike Longcor
SV Trilogy SM23
NZ


On Thu, Aug 4, 2022, 3:26 AM Lance Leonard <Elscubano@...> wrote:
Time to replace the portlight and hatch seals on Minerva, Maramu #135. I looked in the wiki-how on this site, but the attachment with Bill Rouse’s response to a similar question was deleted. Does anyone have a source? Getting kind of weepy over my stove.
Lance Leonard
S/V Minerva
Currently Cruising Downeast Maine

Christian Sloane
 

Hopping on this one- Thanks for the info, Mike
Do you know if the prices listed on their site are per meter? 
if so the hatch gasket pricing is confusing, as said 6.02 when click quantity, but has info that says “14.10” per meter
If you dont know I will reach out to them, as I need to order these, as well….
Thanks!


Christian Sloane
ESAPADES
SM2k #350
Ensenada, MX



On Aug 3, 2022, at 1:27 PM, Mike Longcor (SV Trilogy) <svtrilogy53@...> wrote:

Hi Lance,

If they are tradition portlights, the seal is 8mm diameter round EPDM foam. Here's one website that can supply it: https://www.international-boat-spares.com/en/gaskets-for-hatches-portlights/703-gasket-integration-tradition-hacth-tradition-cristal-portlight-old-hatch.html

They also have the tradition hatch gaskets, which is a trapezoid shaped profile.

The dimensions are given so you could try and source this stuff elsewhere. The hatch gasket could be tricky given it's profile. But 8mm diameter round gasket is common.

Hope this helps.
Cheers,
Mike Longcor
SV Trilogy SM23
NZ

On Thu, Aug 4, 2022, 3:26 AM Lance Leonard <Elscubano@...> wrote:
Time to replace the portlight and hatch seals on Minerva, Maramu #135. I looked in the wiki-how on this site, but the attachment with Bill Rouse’s response to a similar question was deleted. Does anyone have a source? Getting kind of weepy over my stove.
Lance Leonard
S/V Minerva
Currently Cruising Downeast Maine



smime.p7s

smime.p7s

Mike Longcor (SV Trilogy)
 

Hi Christian,

That is a bit confusing. Sorry I don't have the answer. I ended up sourcing the gaskets through a local chandlery. They charged 12.59NZD which is about 7.77euro per meter. So hopefully the website is 6.02euro per meter, but definitely ask for clarification. Good luck!

Cheers,
Mike Longcor
SV Trilogy SM23
NZ

On Thu, Aug 4, 2022, 10:47 AM Christian Sloane <csloane@...> wrote:
Hopping on this one- Thanks for the info, Mike
Do you know if the prices listed on their site are per meter? 
if so the hatch gasket pricing is confusing, as said 6.02 when click quantity, but has info that says “14.10” per meter
If you dont know I will reach out to them, as I need to order these, as well….
Thanks!


Christian Sloane
ESAPADES
SM2k #350
Ensenada, MX



On Aug 3, 2022, at 1:27 PM, Mike Longcor (SV Trilogy) <svtrilogy53@...> wrote:

Hi Lance,

If they are tradition portlights, the seal is 8mm diameter round EPDM foam. Here's one website that can supply it: https://www.international-boat-spares.com/en/gaskets-for-hatches-portlights/703-gasket-integration-tradition-hacth-tradition-cristal-portlight-old-hatch.html

They also have the tradition hatch gaskets, which is a trapezoid shaped profile.

The dimensions are given so you could try and source this stuff elsewhere. The hatch gasket could be tricky given it's profile. But 8mm diameter round gasket is common.

Hope this helps.
Cheers,
Mike Longcor
SV Trilogy SM23
NZ

On Thu, Aug 4, 2022, 3:26 AM Lance Leonard <Elscubano@...> wrote:
Time to replace the portlight and hatch seals on Minerva, Maramu #135. I looked in the wiki-how on this site, but the attachment with Bill Rouse’s response to a similar question was deleted. Does anyone have a source? Getting kind of weepy over my stove.
Lance Leonard
S/V Minerva
Currently Cruising Downeast Maine



Screen Shot 2022-08-03 at 3.44.37 PM.png

Kevin Schmit
 

I ended up purchasing new gasket seals from the same distributor.  Just curious on what sealant/adhesive to use to adhere the gasket to the hatch frame?

Thanks,
--
Kevin & Kristen Schmit
KIANA
SM #362
Gerhard Mueller
 

Any glue will do. It is only to keep the rubber in place. Only to put together the round rubber after cutting it to the correct length you need a special rubber glue.
--
Gerhard Mueller
Amel Sharki #60
Currently North Sea, Germany

1 - 7 of 7