Date
1 - 4 of 4
Windlass lip seal Amel 54
|
Scott SV Tengah
Good to know. I purchased 8mm thick seals, only because that's what I could find with a stainless spring. Hope that isn't too thick.
-- Scott 2007 A54 #69 SV Tengah http://www.svtengah.com |
|
|
|
Scott
toggle quoted message
Show quoted text
I do not think you will get two in. In any case I think that water just runs down the vertical shaft and into the locker below More or less harmlessly. Once you have it all moving, that is the vertical shaft is all greased, it is a five minute job to replace the seal. Nick On 18 Aug 2022, at 23:53, Scott SV Tengah <Scott.nguyen@...> wrote:
|
|
|
|
Scott SV Tengah
Great, thank you Nick! I am wondering if there's enough space to put two lip seals in there, similar to how our C drive has two lip seals facing in one direction.
Looking at the price of the gearbox/motor for that windlass, I would like all the protection I can get against saltwater intrusion! -- Scott 2007 A54 #69 SV Tengah http://www.svtengah.com |
|
|
|
Hi Scott,
I have just been going through my note book and have found the lip seal dimensions ID 25mm OD 40mm I do not have the depth but it is not critical Kind regards Nick S/Y Amelia AML 54-019 Leros |
|
|