Date
1 - 4 of 4
Anchor wash end pipe
|
Hello every body thank you all in advance
|
|||||||
|
|
|||||||
|
Eric Freedman
Years ago I one bought one from Maud. Fair Winds Eric Kimberlite Amel Super Maramu #376
From: main@AmelYachtOwners.groups.io On Behalf Of Nicolas Klene via groups.io
Hello every body thank you all in advance
|
|||||||
|
|
|||||||
|
Made from water pipe. Transparent not armored.
Bend the pipe using a heater. sorry not on my boat can't send the pictures. but that's very simple solution. |
|||||||
|
|
|||||||
|
Amel has not had the rubber angle part in years. Taurus, that is a very good solution! I fit a small piece of hose and a hose quick-connect to the Stainless Steel tube. I found that a short piece of hose and a nozzle could be quickly connected and worked really well. You will need to take care if you have the original SM, 54, 55, or 50 anchor wash pump because none originally had a pressure cut-off switch. If you close the nozzle, you will likely blow a pump fuse or worse a hose connection. If you are replacing the anchor wash pump, get one with a pressure switch. Bill
On Tue, Oct 25, 2022 at 2:36 AM Tauras SM2000 #359 Stella <taurasp@...> wrote: Made from water pipe. Transparent not armored. |
|||||||
|
|
