24 volt motor


Steve Harmon
 

(Forever Young 272) My shaft is cracked on the 24-volt out hull motor on my boom, I was wondering if someone has a source for this motor stateside?


Bill Kinney
 

Which shaft are we talking about?  The horizontal one on the electric motor? Or the vertical one that drives the line tender drum?

If it is the motor, the best option is probably to replace the motor.  Amel had these in stock last time I needed one. This motor can in two brands, Leroy-Somers and Bonfiglioli.  With the part number from the label you can order from a local distributor.  For Leroy-Somer you can try Nidec Motor Corp, I do not have a listing for Bonfiglioli USA distributor, but they are out there. Lead times can be long.

If the vertical shaft on the line tender is the problem, a local machine shop ought to be able to fabricate a new one, or repair.

Bill Kinney
SM160, Harmonie
Tyrell Bay, Carriacou, Grenada 
Http://www.cruisingconsulting.com


Steve Harmon
 

Thanks Bill for the Info, and It was the shaft on the motor. 


Mark Erdos
 

 

 

I believe the Leroy Somers motor is exclusive to Amel. Unless, you have a part number different from Amel's for the same motor. I was told this from a large LS distributor who traced the stock number.


 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us


On 11/6/2022 1:18 AM, Bill Kinney wrote:

Which shaft are we talking about?  The horizontal one on the electric motor? Or the vertical one that drives the line tender drum?

If it is the motor, the best option is probably to replace the motor.  Amel had these in stock last time I needed one. This motor can in two brands, Leroy-Somers and Bonfiglioli.  With the part number from the label you can order from a local distributor.  For Leroy-Somer you can try Nidec Motor Corp, I do not have a listing for Bonfiglioli USA distributor, but they are out there. Lead times can be long.

If the vertical shaft on the line tender is the problem, a local machine shop ought to be able to fabricate a new one, or repair.

Bill Kinney
SM160, Harmonie
Tyrell Bay, Carriacou, Grenada 
Http://www.cruisingconsulting.com