electric tv lifting mechanism for A54
Lior Keydar
Hi Amelians
I would like to replace the TV in the salon on my A54 and looking for a new electric tv lifting mechanism. Did anyone replace the tv electric mechanism and could advise me what model is suitable for it? Thanks a lot in advance. Best, Lior A54 #018 SHARONA |
|
Doug Smith
Lior,
toggle quoted message
Show quoted text
I replaced the lifting actuator device with an exact duplicate I found on EBay. It had a gear inside that failed and I could not get it open to repair. The following season the control box failed and there weren’t any replacements available. So I took out the circuit board and removed the capacitors and replaced them with new ones and it works now for two more years. The old capacitors were degraded a bit when I measured them but not completely failed and no signs of damage when you looked at them. I believe the capacitors were causing the fuse to blow occasionally as well. Thanks, Doug Smith Amel 54-113, Aventura Deltaville VA, USA Dugsmith98@... On Mar 13, 2023, at 3:39 AM, Lior Keydar <lior246@...> wrote:
|
|
David Dickman
Dear Doug, I too would like to replace the lift mechanism for my A54 TV. I checked the circuit and am getting power to the lift motor, but it will not activate in either direction. It was stated that a replacement was found on ebay. Could you please provide specs used for the search? Thanks, David Galini, A54 #100
|
|
Lior Keydar
Dear David and Doug |
|
Doug Smith
My lifting component was the Linak DL 400, and I searched Ebay for that. Looking right now, I don’t see any matching that part. If you think the lifting mechanical actuator is functional, check the capacitors, and just remove and resolder in a new pair. I was seeing my control board, which has two small relays moving, (making and breaking contacts) but not getting a lifting from the actuator. Turned out the capacitors where too weak to kick the motor on and create lifting or lowering.
Thanks, Doug SV Aventura, 54-113 Deltaville, VA USA Doug Smith
From:
main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Lior Keydar <lior246@...> Dear David and Doug |
|
Lior Keydar
Dear Doug
Thanks a lot. The LINAK DL 400 is only the motor part. I would like to buy the complete TV lift. The one that is installed on my boat is old and too small for a new TV. Do you have maybe the model of the complete TV lift? or did AMEL build it? Thanks a lot Lior |
|
Doug Smith
I believe it was a unit that was sold in total. The actuator was the Linak DL400, and the controller, I believe was a Linak CBD4 control box. Not at the boat, but it controlled the DL 400, and was 220VAC powered. I don’t think these are highly sophisticated devices and suspect Amel may have a replacement or a local marine tradesman might. If that isn’t an option, find a Linak distributor, since they can get you sorted out.
Thanks, Doug SV Aventura, 54-113 Deltaville, VA USA Doug Smith
From:
main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Lior Keydar <lior246@...> Dear Doug |
|
Hi Lior,
i have a complete original TV lift available which was installed in our A 54 # 092 Regards Laurens Fun@Sea # 092 La Rochelle |
|