From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of eric freedman
Sent: Sunday, April 7, 2019 8:40 AM
Subject: Re: [AmelYachtOwners] Companionway Door Seal - New Photos Album & Photos
Where do I get the aircraft silicone rubber in the USA?
Kimberlite Amel Super Maramu #376
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Gary Silver via Groups.Io
Sent: Tuesday, March 12, 2019 12:18 AM
Subject: [AmelYachtOwners] Companionway Door Seal - New Photos Album & Photos
I just posted a series of photographs showing the replacement of my companionway door seal. I did this about 4 years ago. I have owned the boat since new and the original Amel seal began failing at about year 10 and by year 13 demanded attention. I was un-successful in obtaining original Amel material (no longer available). I couldn't find anything in the automotive industry that I found suitable, so I fabricated my own. I am an aircraft mechanic and almost daily utilize red silicone sheet rubber for engine baffling. It is very durable and doesn't deform with fuel, oil, heat etc. It has held up well for the last 4 years. I fabricated from teak an obtuse triangular shim to hold the silicone seal material in place against the door in a squeegee like fashion. The photos are in the album entitled:
"Modifications - Companionway Door Seal". I'll try and post a dimensional drawing of the shim and a source for the seal material soon.
Hope this may of be of use to some.
Gary S Silver
Amel SM 2000 #335
Puerto Del Rey Marina, Puerto Rico