Topics

Identify this part

 

All,

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.


CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ

 

Here is a photo of the part to ID:
image.png
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ


On Sat, Mar 14, 2020 at 8:54 AM CW Bill Rouse via Groups.Io <brouse=gmail.com@groups.io> wrote:
All,

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.


CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ

amelforme
 

That’s the bolt and washer for the spare fixed pitch prop.

 

Joel     

 

       JOEL F. POTTER-CRUISING YACHT SPECIALIST~L.L.C.

                                           THE  EXPERIENCED AMEL GUY

UNSURPASSED AMEL MARKETING EXPERIENCE AND PRODUCT KNOWLEDGE

                                   Office 954-462-5869  Cell 954-812-2485

 

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of CW Bill Rouse
Sent: Saturday, March 14, 2020 9:57 AM
To: main@AmelYachtOwners.groups.io Notification <main@amelyachtowners.groups.io>
Subject: Re: [AmelYachtOwners] Identify this part

 

Here is a photo of the part to ID:

image.png

Image removed by sender.

Image removed by sender.

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

Image removed by sender.Image removed by sender.Image removed by sender.

 

View My Training Calendar

Image removed by sender.

Image removed by sender. cloudHQ

Powered by
cloudHQ

 

 

On Sat, Mar 14, 2020 at 8:54 AM CW Bill Rouse via Groups.Io <brouse=gmail.com@groups.io> wrote:

All,

 

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.

 

 

Image removed by sender.

Image removed by sender.

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

Image removed by sender.Image removed by sender.Image removed by sender.

 

View My Training Calendar

Image removed by sender.

Image removed by sender. cloudHQ

Powered by
cloudHQ

Ian Townsend
 

The bottom part goes between the shaft nut and your prop (if it’s a fixed blade, not sure about folding). At least that’s where mine has always been. 

Ian & Margaret
Local Lola II
SM153

On Mar 14, 2020, at 9:57 AM, CW Bill Rouse <brouse@...> wrote:


Here is a photo of the part to ID:
<image.png>

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ


On Sat, Mar 14, 2020 at 8:54 AM CW Bill Rouse via Groups.Io <brouse=gmail.com@groups.io> wrote:
All,

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.


CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ

Giovanni TESTA
 

Hi Bill.
I think to fix the propeller we have on board, as spare, instead of Autoprop.
Best
Gianni
sv EUTIKIA SM2K 428

Il 14/03/2020 14:57, CW Bill Rouse ha scritto:
Here is a photo of the part to ID:
image.png
CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

View My Training Calendar
cloudHQ Powered by
cloudHQ



On Sat, Mar 14, 2020 at 8:54 AM CW Bill Rouse via Groups.Io <brouse=gmail.com@groups.io> wrote:
All,

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.


CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

View My Training Calendar
cloudHQ Powered by
cloudHQ


eric freedman
 

I think it is the nut and locking washer  for the spare prop.

Fair Winds

Eric

Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of CW Bill Rouse
Sent: Saturday, March 14, 2020 9:57 AM
To: main@AmelYachtOwners.groups.io Notification
Subject: Re: [AmelYachtOwners] Identify this part

 

Here is a photo of the part to ID:

image.png

Image removed by sender.

Image removed by sender.

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

Image removed by sender.Image removed by sender.Image removed by sender.

 

View My Training Calendar

Image removed by sender.

Image removed by sender. cloudHQ

Powered by
cloudHQ

 

 

On Sat, Mar 14, 2020 at 8:54 AM CW Bill Rouse via Groups.Io <brouse=gmail.com@groups.io> wrote:

All,

 

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.

 

 

Image removed by sender.

Image removed by sender.

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

Image removed by sender.Image removed by sender.Image removed by sender.

 

View My Training Calendar

Image removed by sender.

Image removed by sender. cloudHQ

Powered by
cloudHQ

Olaf Bauer
 

Yes, that’s right:

 

It is the screw for the spare fixed prop on SM’s. it is not for the autoprop.

 

The flat part has to be between the prop and the nut and has to be bend at the end of installation that the nut could not be “unscrewed” by itself.

 

The small lip of the flat part has to be placed into the slot of the prop.

 

Fair winds

Olaf

 

S/V Katchopine, SM2K 392

currently in Trinidad

 

 

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Giovanni TESTA
Sent: Samstag, 14. März 2020 11:52
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Identify this part

 

Hi Bill.
I think to fix the propeller we have on board, as spare, instead of Autoprop.
Best
Gianni
sv EUTIKIA SM2K 428

 

Il 14/03/2020 14:57, CW Bill Rouse ha scritto:

Here is a photo of the part to ID:

image.png

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

 

View My Training Calendar

cloudHQ

Powered by
cloudHQ

 

 

On Sat, Mar 14, 2020 at 8:54 AM CW Bill Rouse via Groups.Io <brouse=gmail.com@groups.io> wrote:

All,

 

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.

 

 

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

 

View My Training Calendar

cloudHQ

Powered by
cloudHQ