Mastervolt / XANTRAX Battery Monitor -
toggle quoted messageShow quoted text
As promised a while ago (excuse the delay) here the settings I have.
I changed 2 years ago from standard lead acid to AGM and just changed one or two parameter according to the battery specifications.
According to the Xantrex Manual:
For most battery systems, adjusting the values of Functions F01, F02, F03, F07, F08 should be sufficient.
“It is recommended not to change F04, F05, F06, F09, F10 – F20 when in doubt”.
All *marked Values are default settings by Xantrax. The other parameter I have changed over time by gaining more experience and confident.
F01 600AH (I have 12x 100AH AGM)
F02 27.2V according to the AGM Specs I have installed
F03 1 %
F04 *4 min
F05 *50 %
F17 60 S
Hope this helps for you Ulrich. I will call you sometime today on whatsup.
WASABI A54. #55
Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> im Auftrag von Rudolf Waldispuehl <Rudolf@...>
Our XANTREX Akku Monitor on WASABI A54#55 does have 20 settings (Parameters). I played around with it last year and found out it is more a monitoring and alarming systems. So the settings are for example to set low/high voltage threshold, etc. The manual says that there are parameters which should be kept as default, and some important one can/should be adapted.
I’m back on WASABI by mid of March and can send you the settings which I have on our AMEL-54. We can even talk on whatsup or Skype if you like.
Ruedi & Sabina Waldispuehl
"SY WASABI“ - Amel 54. #55
Currently in ALMERIMAR
Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf of Ulrich Michael Dangelmeyer <ulrich.dangelmeyer@...>
Hi Bill, Servus Wolfgang,
THX for your quick response. But our´s square housing shaped Xantrex is in the product data sheet only as "Xantrex Akku Monitor" named. No "Link , Link Pro, Link Lite" or so.
I found in the Web the same manual as we have obviously on board, but the listing of values to adjust is little different as Wolfgang mentioned, regarding his LinkLite.
May be I can match these settings over on ours? It´s a Monitor, not a charging management, mhm?
If there is anybody in the Group who’s is familiar with same type of monitor, he is able to sent me the correct adjustments (24V), very much appreciated.
THX for help.
Best wishes and stay safe.