modified stern railing on 54 to carry line drums
Hi all,
- Both crossbeam tubes can be removed - Currently the tubes are fixed with quick release fasteners - If necessary, the quick release fasteners can be replaced by bolts and nuts to create a very stiff connection. - The previous cable ties only had to be shortened.
Regards Mago del Sur - 54#40 currently Marina di Ragusa,
|
|||||||
|
|||||||
Martin,
toggle quoted messageShow quoted text
Very nice - where did you have this done? Peter Peter Forbes Amel54 #035 Lymington UK
On 16 Apr 2022, at 12:05, Martin Birkhoff <mbirkhoff@...> wrote:
|
|||||||
|
|||||||
Martin can I ask about what appears to be an electric winch attached to the deck at the aft end of your boat?
toggle quoted messageShow quoted text
Cheers Courtney 54#101 Trippin
On Apr 16, 2022, at 7:22 AM, Peter Forbes <ppsforbes@...> wrote:
|
|||||||
|
|||||||
Peter,
|
|||||||
|
|||||||
Courtney,
|
|||||||
|
|||||||
Thank you Martin.
toggle quoted messageShow quoted text
Peter Forbes The Old Rectory Farnham Blandford DT11 8 DE 07836 209730
On 16 Apr 2022, at 16:51, Martin Birkhoff <mbirkhoff@...> wrote:
|
|||||||
|
|||||||
Thanks Martin very interesting
toggle quoted messageShow quoted text
Cheers 🥂
On Apr 16, 2022, at 12:31 PM, Peter Forbes <ppsforbes@...> wrote:
|
|||||||
|
|||||||
Scott SV Tengah
|
|||||||
|
|||||||
It is a FX-37, weight 9,5 kg
|
|||||||
|
|||||||
Scott SV Tengah
Thanks Martin. We finally had to use a stern anchor after 4 years cruising. We deployed the port anchor (Delta, believe 31kg!) as a stern anchor using the dinghy. Not a pleasant experience and we have not yet tried to retrieve it. By the way, the rode is attached to the stern cleat but chafes on the stainless rub rail and on the hull as the boat moves around. Have you solved this?
I am considering getting a dedicated Fortress stern anchor, but wondering how much I will use it. Other than Patagonia, where do you anticipate needing it? -- Scott 2007 A54 #69 SV Tengah http://www.svtengah.com
|
|||||||
|
|||||||
Scott,
toggle quoted messageShow quoted text
We used our stern anchor in 2 places - the Galapagos and Hiva Oa in the Marquesas. Both due anchorages with restricted space and lots of boats which also had stern anchors. Other than that never used - but I guess if you need it once it is enough to carry one. Peter Forbes CARANGO Amel 54 035 Lymington UK 07836 209730
On 4 May 2022, at 18:48, Scott SV Tengah <Scott.nguyen@...> wrote:
|
|||||||
|
|||||||
Scott SV Tengah
Peter,
Good to hear that you didn’t need it too often on your circumnavigation. Which stern anchor do you have?
We were in Atuona, Hiva Oa last week and got lucky – the supply ship wasn’t there and we were able to stern tie to the yellow mooring buoy. Good fun trying to drop the admiral off on the buoy with a cross breeze. 😊
We’re in Hakahau, Ua Pou now and a stern anchor is essential for the reasons you mentioned. As an aside, a group of Outremers with the Grand Large Rally showed up and didn’t put out stern anchors. They rotated 360 with the shifty winds but thankfully left early the next morning. Note to self: rally flag means “stay away!”
From: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf of Peter Forbes <ppsforbes@...>
Scott,
We used our stern anchor in 2 places - the Galapagos and Hiva Oa in the Marquesas. Both due anchorages with restricted space and lots of boats which also had stern anchors. Other than that never used - but I guess if you need it once it is enough to carry one.
Peter Forbes CARANGO Amel 54 035 Lymington UK 07836 209730
|
|||||||
|
|||||||
Yup - stay away from Rallies.
toggle quoted messageShow quoted text
We had a light aluminium Danforth stowed on the stbd stern rail just aft of our life raft. Chain separate in the lazerette - there seems to be time to set up whilst working out where to moor. Peter Peter Forbes Carango Amel 54 #035 lymington UK 07836 209730
On 4 May 2022, at 20:02, Scott SV Tengah <Scott.nguyen@...> wrote:
|
|||||||
|
|||||||
We used the stern anchor in those two places on our circle around the world: The Galapagos and Hiva Oa in the Marquesas, and both due to restricted space and wanting to point the bow to the ocean swell. We had a 15kg Spade with 4 or 5 meters of 10mm chain connected to a nylon 3-strand rode.Bill
On Wed, May 4, 2022 at 1:46 PM Peter Forbes <ppsforbes@...> wrote:
|
|||||||
|
|||||||
Hello Scott,
|
|||||||
|
|||||||
... if mounted the outrigger shows an angle of roundabout 30° to the water surface.
|
|||||||
|
|||||||
Scott SV Tengah
Thanks for the detailed response Martin. This is the most advanced stern anchor system I've seen on an Amel by far.
-- Scott 2007 A54 #69 SV Tengah http://www.svtengah.com
|
|||||||
|
|||||||
Danny and Yvonne SIMMS
Hi all, We sailed from Florida to the top of Maine and back down, through Long Island sound and New York to the Chesapeake, then to the Caribbean and Panama, Galapagos, Marquesas, French Polynesia and various Pacific Islands and Home to NZ. Then numerous cruises to the Pacific islands and much cruising around NZ. Used a stern anchor once in Hiva Oa where all the boats were in perfect line. We just used our second primary anchor and chain. A bit cumbersome, but once in 14 years, I don't think it justifies a dedicated anchor
Kind regards
Danny
SM 299
Ocean Pearl
|
|||||||
|
|||||||
We carry a Fortress FX37 near the stern on the inside of the port side railing with an Ancorlina spool of woven cord rode mounted just aft of it, also inside the railing. Really simple. Like Martin, we use it regularly - I'd say almost weekly whilst cruising.
To retrieve just reverse the process, letting out bow anchor rode and then bringing the stern anchor up first - you'll be pulling straight up on it making it a cinch to break out (well, once in a while I have to put it on the genoa winch - that Fortress can really get set!). For mounting, ours is simply resting sideways against the rail and lifeline with the tipping palm/mud plate hooking perfectly over the lifeline taking most of the weight (with a plastic tube over that section of lifeline for protection), the bottom end of the stock (tubular crosspiece) rests on deck (the anchor being sideways) with a rubber cap to protect the deck and a velcro strap to the stanchion; the top of the stock also has a velcro strap holding it to the top rail. The end of the fluke rests on the deck toward the stern, with a "crutch tip" on the end and a light lashing to a stanchion. -- Cheers, Craig Briggs - s/v Sangaris / SN68 Tropic Isle Harbor, FL
|
|||||||
|
|||||||
Craig I am sold on it
Can you post a couple of pix? Thanks a a lot Jose Gabriel Venegas Ipanema SM2K 278 Cartagena de Indias
|
|||||||
|