Topics

Rub Rail Rubber Inserts: Last Call

Karen Smith
 

We have an extruder in the USA to make a custom extrusion of the Amel rubber rail that fits the Super Maramu and Santorin.

The material will be white EDPM, and it will be supplied in 2 pieces each 16 m (52'6") in length.  Cost will be $805 for the two pieces sufficient to replace both inserts on one boat.  Shipping will be from South Florida, and for UPS ground it ranges from <$200 for the lower 48, to $460 to Hawaii.

We have 10 boats signed on as interested, (which JUST covers the minimum order!) and will be scheduling the production run within a week or so, so if there is anyone else, this is your last chance!

Charles Bell
 

Hello Karen,

I am interested in joining the order (will commit today)  if the rail you are going to extrude would fit my Amel Mango.

Do you have a profile/drawing/picture you can share? Or do you know if it will fit the Mango?

Thank you,

Charles

Karen Smith
 

Charles,

My understanding is the Mango rail is quite different, but that is thirtd hand, at best Here is a photo of the insert from an early Super Maramu, before Amel switched to a white extrusion.

.

amelforme
 

There were a couple of different rub rails for the Mango and just one, all but certain, on the Sharks and Maramu. They share nothing in common with the Santorin and Super Maramu insert.

JOEL F. POTTER
CRUISING YACHT SPECIALIST LLC
THE EXPERIENCED AMEL GUY
Office 954-462-5869 

On Mar 14, 2020, at 1:04 PM, Karen Smith via Groups.Io <karenharmonie@...> wrote:

Charles,

My understanding is the Mango rail is quite different, but that is thirtd hand, at best Here is a photo of the insert from an early Super Maramu, before Amel switched to a white extrusion.

.
<IMG_1774.jpg>

mr_hermanns
 

Ill hit you up on FB messenger!
--
Jeremy Hermanns - "Jer"
SVCerulean.com
Maramu #105
Marina Del Rey, CA

Volker Hasenauer
 

Hi Karen,

I just read your email while stranded in Europe due to Corona Virus travel ban.

Have you placed the order already? How does shipments get arranged? I would need shipment to Malaysia - guess that's a problem?

Volker
SY Aquamarine
Santorin 027
Borneo Malaysia

On Sat, Mar 14, 2020 at 11:54 PM Karen Smith via Groups.Io <karenharmonie=yahoo.com@groups.io> wrote:
We have an extruder in the USA to make a custom extrusion of the Amel rubber rail that fits the Super Maramu and Santorin.

The material will be white EDPM, and it will be supplied in 2 pieces each 16 m (52'6") in length.  Cost will be $805 for the two pieces sufficient to replace both inserts on one boat.  Shipping will be from South Florida, and for UPS ground it ranges from <$200 for the lower 48, to $460 to Hawaii.

We have 10 boats signed on as interested, (which JUST covers the minimum order!) and will be scheduling the production run within a week or so, so if there is anyone else, this is your last chance!