Topics

Vintage Maramu dinghy stowage


smiles bernard
 

Hi there

I’d be really interested to hear of others Maramu dinghy choice wrt stowage
The transom of the Maramu is quite a bit narrower than the SM and later models - as such davits don’t feel right as any dink would overhang the sides If the boat a lot

Plus I have a much treasured Hydrovane on the back

We currently carry an inflatable and also a nesting affair I made

The nesting dinghy stows Inverted under the mizzen boom but that space is not big enough for the inflatable which I pack up and stow in the fwd locker

Really interested in the options people have explored.

Does anyone mount their dinghy right side up on the deck on the foredeck? I’ve seen a few SMs with this setup but feels tight re space on the Maramu

All the very best

Miles
Maramu 162


Looks like we are heading off as


James Alton
 

Miles,

   We found a Ribeye 2.6 aluminum RIB that fits beautifully on the aft cabin top between the back of the mizzen mast and the mizzen traveller.   The mizzen vang however does need to be detached to fit it. With one person aboard the dinghy will partially plane out with a Honda 2.3 hp 4 stroke.  We have a Mercury 9.9 2 stroke that we want to try on the dinghy. We like the dinghy a lot, as it is stable and  quite light.  Personally I feel that a dinghy on the foredeck would restrict the forward view too much but if you want a larger dinghy there are not many other options.  

James
SV Sueño
Maramu #220






On Jul 15, 2020, at 2:15 PM, smiles bernard via groups.io <smilesbernard@...> wrote:

Hi there

I’d be really interested to hear of others Maramu dinghy choice wrt stowage
The transom of the Maramu is quite a bit narrower than the SM and later models - as such davits don’t feel right as any dink would overhang the sides If the boat a lot

Plus I have a much treasured Hydrovane on the back

We currently carry an inflatable and also a nesting affair I made

The nesting dinghy stows Inverted under the mizzen boom but that space is not big enough for the inflatable which I pack up and stow in the fwd locker

Really interested in the options people have explored.

Does anyone mount their dinghy right side up on the deck on the foredeck? I’ve seen a few SMs with this setup but feels tight re space on the Maramu

All the very best

Miles
Maramu 162


Looks like we are heading off as





Bernd W. Rost
 

 
 
 
Gesendet: Mittwoch, 15. Juli 2020 um 21:22 Uhr
Von: "James Alton via groups.io" <lokiyawl2@...>
An: main@AmelYachtOwners.groups.io
Betreff: Re: [AmelYachtOwners] Vintage Maramu dinghy stowage
Miles,
 
   We found a Ribeye 2.6 aluminum RIB that fits beautifully on the aft cabin top between the back of the mizzen mast and the mizzen traveller.   The mizzen vang however does need to be detached to fit it. With one person aboard the dinghy will partially plane out with a Honda 2.3 hp 4 stroke.  We have a Mercury 9.9 2 stroke that we want to try on the dinghy. We like the dinghy a lot, as it is stable and  quite light.  Personally I feel that a dinghy on the foredeck would restrict the forward view too much but if you want a larger dinghy there are not many other options.  
 
James
SV Sueño
Maramu #220
 
 
 
 
 
 

On Jul 15, 2020, at 2:15 PM, smiles bernard via groups.io <smilesbernard@...> wrote:
 
Hi there

I’d be really interested to hear of others Maramu dinghy choice wrt stowage
The transom of the Maramu is quite a bit narrower than the SM and later models - as such davits don’t feel right as any dink would overhang the sides If the boat a lot

Plus I have a much treasured Hydrovane on the back

We currently carry an inflatable and also a nesting affair I made

The nesting dinghy stows Inverted under the mizzen boom but that space is not big enough for the inflatable which I pack up and stow in the fwd locker

Really interested in the options people have explored.

Does anyone mount their dinghy right side up on the deck on the foredeck? I’ve seen a few SMs with this setup but feels tight re space on the Maramu

All the very best

Miles
Maramu 162


Looks like we are heading off as


 


Bernd W. Rost
 

 
 
 
Gesendet: Mittwoch, 15. Juli 2020 um 21:23 Uhr
Von: "Bernd W. Rost" <bernd.w.rost@...>
An: main@AmelYachtOwners.groups.io
Betreff: Re: [AmelYachtOwners] Vintage Maramu dinghy stowage
 
 
 
Gesendet: Mittwoch, 15. Juli 2020 um 21:22 Uhr
Von: "James Alton via groups.io" <lokiyawl2@...>
An: main@AmelYachtOwners.groups.io
Betreff: Re: [AmelYachtOwners] Vintage Maramu dinghy stowage
Miles,
 
   We found a Ribeye 2.6 aluminum RIB that fits beautifully on the aft cabin top between the back of the mizzen mast and the mizzen traveller.   The mizzen vang however does need to be detached to fit it. With one person aboard the dinghy will partially plane out with a Honda 2.3 hp 4 stroke.  We have a Mercury 9.9 2 stroke that we want to try on the dinghy. We like the dinghy a lot, as it is stable and  quite light.  Personally I feel that a dinghy on the foredeck would restrict the forward view too much but if you want a larger dinghy there are not many other options.  
 
James
SV Sueño
Maramu #220
 
 
 
 
 
 

On Jul 15, 2020, at 2:15 PM, smiles bernard via groups.io <smilesbernard@...> wrote:
 
Hi there

I’d be really interested to hear of others Maramu dinghy choice wrt stowage
The transom of the Maramu is quite a bit narrower than the SM and later models - as such davits don’t feel right as any dink would overhang the sides If the boat a lot

Plus I have a much treasured Hydrovane on the back

We currently carry an inflatable and also a nesting affair I made

The nesting dinghy stows Inverted under the mizzen boom but that space is not big enough for the inflatable which I pack up and stow in the fwd locker

Really interested in the options people have explored.

Does anyone mount their dinghy right side up on the deck on the foredeck? I’ve seen a few SMs with this setup but feels tight re space on the Maramu

All the very best

Miles
Maramu 162


Looks like we are heading off as


 


smiles bernard
 

Thanks James
Thats great to know 
The rib looks like a real beauty
agreed re visabiliy issues that a foredeck mounting would create - even with the inflatable stowed inverted fwd of the mast the vis is a bit rubbish - so yes good point
I've previously built my nester and its been great for kids sailing and amazing to row....
but also a hassle to put together
So wondering if to give up on a nester ......
or build a better one ;) 
the Chameleon design looks nice and has a proper centerboard vs my leeboard
Hope all is well with you and yours
M


Aras Grinius
 

I traded in our inflatable for a Portland Pudgy. She tows quite nicely, however on longer passages I do have to mount it on the foredeck.  AS with the Maramu,  the Sharki's stern tapers quite a bit and the aft deck is not quite big enough to stow the Pudgy there.  So far I've been  stowing it upside down.  It makes it a bit harder to load and unload off the deck. I'm working on building a new cradle that would allow me to stow upright.

One other option I'm thinking about are low profile dink davits made of carbon fiber [the mizzen boom overhangs transom].  The davits would help greatly on short passages and make it easier to move boat around in tight places and improve visibility. Does anyone know of an outfit that works with carbon fiber?

Aras Grinius
S/V FIASCO
Sharki #163 1988

On Wed, Jul 15, 2020 at 2:15 PM smiles bernard via groups.io <smilesbernard=yahoo.com@groups.io> wrote:
Hi there

I’d be really interested to hear of others Maramu dinghy choice wrt stowage
The transom of the Maramu is quite a bit narrower than the SM and later models - as such davits don’t feel right as any dink would overhang the sides If the boat a lot

Plus I have a much treasured Hydrovane on the back

We currently carry an inflatable and also a nesting affair I made

The nesting dinghy stows Inverted under the mizzen boom but that space is not big enough for the inflatable which I pack up and stow in the fwd locker

Really interested in the options people have explored.

Does anyone mount their dinghy right side up on the deck on the foredeck? I’ve seen a few SMs with this setup but feels tight re space on the Maramu

All the very best

Miles
Maramu 162


Looks like we are heading off as





--
Aras Grinius


Lance Leonard
 

We recently purchased Minerva, Hull #135. It came with a small RIB that we store on the mizzen deck (no boomvang). We will be retrieving our PortaBote from California this winter. Stores nicely along the rail, about the same footprint as a large surfboard. Not the most attractive option but you will never loose it at the dingy dock.


INUS - BUSCH
 

@ Aras:  

I have never seen a Portland pudgy, it looks nice and sails!

What I have is a UL 270 Aluminum from 3d tender, inflatable with aluminium bottom, which fits on the fore deck of my sharki, weight is only 28 kg!

 

Dieter

Fal-lera, Sharki #135

 

Von: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> Im Auftrag von Aras
Gesendet: Donnerstag, 16. Juli 2020 15:16
An: main@AmelYachtOwners.groups.io Group Moderators <main@amelyachtowners.groups.io>
Betreff: Re: [AmelYachtOwners] Vintage Maramu dinghy stowage

 

I traded in our inflatable for a Portland Pudgy. She tows quite nicely, however on longer passages I do have to mount it on the foredeck.  AS with the Maramu,  the Sharki's stern tapers quite a bit and the aft deck is not quite big enough to stow the Pudgy there.  So far I've been  stowing it upside down.  It makes it a bit harder to load and unload off the deck. I'm working on building a new cradle that would allow me to stow upright.

 

One other option I'm thinking about are low profile dink davits made of carbon fiber [the mizzen boom overhangs transom].  The davits would help greatly on short passages and make it easier to move boat around in tight places and improve visibility. Does anyone know of an outfit that works with carbon fiber?

 

Aras Grinius

S/V FIASCO

Sharki #163 1988

 

On Wed, Jul 15, 2020 at 2:15 PM smiles bernard via groups.io <smilesbernard=yahoo.com@groups.io> wrote:

Hi there

I’d be really interested to hear of others Maramu dinghy choice wrt stowage
The transom of the Maramu is quite a bit narrower than the SM and later models - as such davits don’t feel right as any dink would overhang the sides If the boat a lot

Plus I have a much treasured Hydrovane on the back

We currently carry an inflatable and also a nesting affair I made

The nesting dinghy stows Inverted under the mizzen boom but that space is not big enough for the inflatable which I pack up and stow in the fwd locker

Really interested in the options people have explored.

Does anyone mount their dinghy right side up on the deck on the foredeck? I’ve seen a few SMs with this setup but feels tight re space on the Maramu

All the very best

Miles
Maramu 162


Looks like we are heading off as




--

Aras Grinius


Aras Grinius
 

Dieter,
We studied options regarding a hard shell dinghy vs a rib vs inflatable.  The Pudgy can be fitted as a life boat. [currently working towards certification by USCG].  That means I can sell my liferaft and free up some space in my locker.  Wife likes the fact that our Honda 2.3 hp  weighs 30lbs [ just under 14 kg] can be hoisted by her.  And yes sails quite nicely.
Downsides, is that it weighs altogether fully loaded 59 kg (130lbs), a bit heavy and stowing looks to be a challenge.  I've seen some davits for Sharki's on Yachtworld, but I'm not sold on them quite yet.   So if you have davits, I surely like to see how they are attached.

Aras
SV FIASCO
Sharki #163 1988


On Fri, Jul 17, 2020 at 9:31 AM INUS - BUSCH via groups.io <inusbusch=yahoo.de@groups.io> wrote:

@ Aras:  

I have never seen a Portland pudgy, it looks nice and sails!

What I have is a UL 270 Aluminum from 3d tender, inflatable with aluminium bottom, which fits on the fore deck of my sharki, weight is only 28 kg!

 

Dieter

Fal-lera, Sharki #135

 

Von: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> Im Auftrag von Aras
Gesendet: Donnerstag, 16. Juli 2020 15:16
An: main@AmelYachtOwners.groups.io Group Moderators <main@amelyachtowners.groups.io>
Betreff: Re: [AmelYachtOwners] Vintage Maramu dinghy stowage

 

I traded in our inflatable for a Portland Pudgy. She tows quite nicely, however on longer passages I do have to mount it on the foredeck.  AS with the Maramu,  the Sharki's stern tapers quite a bit and the aft deck is not quite big enough to stow the Pudgy there.  So far I've been  stowing it upside down.  It makes it a bit harder to load and unload off the deck. I'm working on building a new cradle that would allow me to stow upright.

 

One other option I'm thinking about are low profile dink davits made of carbon fiber [the mizzen boom overhangs transom].  The davits would help greatly on short passages and make it easier to move boat around in tight places and improve visibility. Does anyone know of an outfit that works with carbon fiber?

 

Aras Grinius

S/V FIASCO

Sharki #163 1988

 

On Wed, Jul 15, 2020 at 2:15 PM smiles bernard via groups.io <smilesbernard=yahoo.com@groups.io> wrote:

Hi there

I’d be really interested to hear of others Maramu dinghy choice wrt stowage
The transom of the Maramu is quite a bit narrower than the SM and later models - as such davits don’t feel right as any dink would overhang the sides If the boat a lot

Plus I have a much treasured Hydrovane on the back

We currently carry an inflatable and also a nesting affair I made

The nesting dinghy stows Inverted under the mizzen boom but that space is not big enough for the inflatable which I pack up and stow in the fwd locker

Really interested in the options people have explored.

Does anyone mount their dinghy right side up on the deck on the foredeck? I’ve seen a few SMs with this setup but feels tight re space on the Maramu

All the very best

Miles
Maramu 162


Looks like we are heading off as




--

Aras Grinius



--
Aras Grinius


INUS - BUSCH
 

Aras,

 

sorry, I do not have davits.

BTW until now I haven’t seen a solution, which could please me.

But I am very interested in what you are planning.

Dieter
Fal-lera, Sharki #135

 

 

Von: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> Im Auftrag von Aras
Gesendet: Freitag, 17. Juli 2020 16:03
An: main@AmelYachtOwners.groups.io Group Moderators <main@amelyachtowners.groups.io>
Betreff: Re: [AmelYachtOwners] Vintage Maramu dinghy stowage

 

Dieter,

We studied options regarding a hard shell dinghy vs a rib vs inflatable.  The Pudgy can be fitted as a life boat. [currently working towards certification by USCG].  That means I can sell my liferaft and free up some space in my locker.  Wife likes the fact that our Honda 2.3 hp  weighs 30lbs [ just under 14 kg] can be hoisted by her.  And yes sails quite nicely.

Downsides, is that it weighs altogether fully loaded 59 kg (130lbs), a bit heavy and stowing looks to be a challenge.  I've seen some davits for Sharki's on Yachtworld, but I'm not sold on them quite yet.   So if you have davits, I surely like to see how they are attached.

 

Aras

SV FIASCO

Sharki #163 1988

 

On Fri, Jul 17, 2020 at 9:31 AM INUS - BUSCH via groups.io <inusbusch=yahoo.de@groups.io> wrote:

@ Aras:  

I have never seen a Portland pudgy, it looks nice and sails!

What I have is a UL 270 Aluminum from 3d tender, inflatable with aluminium bottom, which fits on the fore deck of my sharki, weight is only 28 kg!

 

Dieter

Fal-lera, Sharki #135

 

Von: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> Im Auftrag von Aras
Gesendet: Donnerstag, 16. Juli 2020 15:16
An: main@AmelYachtOwners.groups.io Group Moderators <main@amelyachtowners.groups.io>
Betreff: Re: [AmelYachtOwners] Vintage Maramu dinghy stowage

 

I traded in our inflatable for a Portland Pudgy. She tows quite nicely, however on longer passages I do have to mount it on the foredeck.  AS with the Maramu,  the Sharki's stern tapers quite a bit and the aft deck is not quite big enough to stow the Pudgy there.  So far I've been  stowing it upside down.  It makes it a bit harder to load and unload off the deck. I'm working on building a new cradle that would allow me to stow upright.

 

One other option I'm thinking about are low profile dink davits made of carbon fiber [the mizzen boom overhangs transom].  The davits would help greatly on short passages and make it easier to move boat around in tight places and improve visibility. Does anyone know of an outfit that works with carbon fiber?

 

Aras Grinius

S/V FIASCO

Sharki #163 1988

 

On Wed, Jul 15, 2020 at 2:15 PM smiles bernard via groups.io <smilesbernard=yahoo.com@groups.io> wrote:

Hi there

I’d be really interested to hear of others Maramu dinghy choice wrt stowage
The transom of the Maramu is quite a bit narrower than the SM and later models - as such davits don’t feel right as any dink would overhang the sides If the boat a lot

Plus I have a much treasured Hydrovane on the back

We currently carry an inflatable and also a nesting affair I made

The nesting dinghy stows Inverted under the mizzen boom but that space is not big enough for the inflatable which I pack up and stow in the fwd locker

Really interested in the options people have explored.

Does anyone mount their dinghy right side up on the deck on the foredeck? I’ve seen a few SMs with this setup but feels tight re space on the Maramu

All the very best

Miles
Maramu 162


Looks like we are heading off as



--

Aras Grinius



--

Aras Grinius


smiles bernard
 

Wow that’s light!
When offshore do you use chicks on the deck and deflate or just strap it down inflated?

Likewise I’ve never seen the pudgy before - love a dinghy with a sail !

All the best




On 17 Jul 2020, at 14:31, INUS - BUSCH via groups.io <inusbusch@...> wrote:



@ Aras:  

I have never seen a Portland pudgy, it looks nice and sails!

What I have is a UL 270 Aluminum from 3d tender, inflatable with aluminium bottom, which fits on the fore deck of my sharki, weight is only 28 kg!

 

Dieter

Fal-lera, Sharki #135

 

Von: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> Im Auftrag von Aras
Gesendet: Donnerstag, 16. Juli 2020 15:16
An: main@AmelYachtOwners.groups.io Group Moderators <main@amelyachtowners.groups.io>
Betreff: Re: [AmelYachtOwners] Vintage Maramu dinghy stowage

 

I traded in our inflatable for a Portland Pudgy. She tows quite nicely, however on longer passages I do have to mount it on the foredeck.  AS with the Maramu,  the Sharki's stern tapers quite a bit and the aft deck is not quite big enough to stow the Pudgy there.  So far I've been  stowing it upside down.  It makes it a bit harder to load and unload off the deck. I'm working on building a new cradle that would allow me to stow upright.

 

One other option I'm thinking about are low profile dink davits made of carbon fiber [the mizzen boom overhangs transom].  The davits would help greatly on short passages and make it easier to move boat around in tight places and improve visibility. Does anyone know of an outfit that works with carbon fiber?

 

Aras Grinius

S/V FIASCO

Sharki #163 1988

 

On Wed, Jul 15, 2020 at 2:15 PM smiles bernard via groups.io <smilesbernard=yahoo.com@groups.io> wrote:

Hi there

I’d be really interested to hear of others Maramu dinghy choice wrt stowage
The transom of the Maramu is quite a bit narrower than the SM and later models - as such davits don’t feel right as any dink would overhang the sides If the boat a lot

Plus I have a much treasured Hydrovane on the back

We currently carry an inflatable and also a nesting affair I made

The nesting dinghy stows Inverted under the mizzen boom but that space is not big enough for the inflatable which I pack up and stow in the fwd locker

Really interested in the options people have explored.

Does anyone mount their dinghy right side up on the deck on the foredeck? I’ve seen a few SMs with this setup but feels tight re space on the Maramu

All the very best

Miles
Maramu 162


Looks like we are heading off as




--

Aras Grinius


Scott Williams
 

You should maybe check out the wee unit they have on YouTube’s “Sailing Florence” - it's a beautiful thing, if you like sailing a dinghy…


Scott
Future A50 owner





Sent from Surface

From: smiles bernard via groups.io
Sent: ‎Saturday‎, ‎18‎ ‎July‎ ‎2020 ‎3‎:‎48‎ ‎AM
To: main@AmelYachtOwners.groups.io Calendar

Wow that’s light!
When offshore do you use chicks on the deck and deflate or just strap it down inflated?

Likewise I’ve never seen the pudgy before - love a dinghy with a sail !

All the best




On 17 Jul 2020, at 14:31, INUS - BUSCH via groups.io <inusbusch@...> wrote:



@ Aras:  

I have never seen a Portland pudgy, it looks nice and sails!

What I have is a UL 270 Aluminum from 3d tender, inflatable with aluminium bottom, which fits on the fore deck of my sharki, weight is only 28 kg!

 

Dieter

Fal-lera, Sharki #135

 

Von: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> Im Auftrag von Aras
Gesendet: Donnerstag, 16. Juli 2020 15:16
An: main@AmelYachtOwners.groups.io Group Moderators <main@amelyachtowners.groups.io>
Betreff: Re: [AmelYachtOwners] Vintage Maramu dinghy stowage

 

I traded in our inflatable for a Portland Pudgy. She tows quite nicely, however on longer passages I do have to mount it on the foredeck.  AS with the Maramu,  the Sharki's stern tapers quite a bit and the aft deck is not quite big enough to stow the Pudgy there.  So far I've been  stowing it upside down.  It makes it a bit harder to load and unload off the deck. I'm working on building a new cradle that would allow me to stow upright.

 

One other option I'm thinking about are low profile dink davits made of carbon fiber [the mizzen boom overhangs transom].  The davits would help greatly on short passages and make it easier to move boat around in tight places and improve visibility. Does anyone know of an outfit that works with carbon fiber?

 

Aras Grinius

S/V FIASCO

Sharki #163 1988

 

On Wed, Jul 15, 2020 at 2:15 PM smiles bernard via groups.io <smilesbernard=yahoo.com@groups.io> wrote:

Hi there

I’d be really interested to hear of others Maramu dinghy choice wrt stowage
The transom of the Maramu is quite a bit narrower than the SM and later models - as such davits don’t feel right as any dink would overhang the sides If the boat a lot

Plus I have a much treasured Hydrovane on the back

We currently carry an inflatable and also a nesting affair I made

The nesting dinghy stows Inverted under the mizzen boom but that space is not big enough for the inflatable which I pack up and stow in the fwd locker

Really interested in the options people have explored.

Does anyone mount their dinghy right side up on the deck on the foredeck? I’ve seen a few SMs with this setup but feels tight re space on the Maramu

All the very best

Miles
Maramu 162


Looks like we are heading off as




--

Aras Grinius


INUS - BUSCH
 

I have it inflated on the foredeck and it is strapped upside down. Very easy. The visibility from the helm is a little restricted, but for me the best solution so far.

 

Dieter

Fal-lera, Sharki #135

 

Von: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> Im Auftrag von smiles bernard via groups.io
Gesendet: Freitag, 17. Juli 2020 19:48
An: main@amelyachtowners.groups.io
Betreff: Re: [AmelYachtOwners] Vintage Maramu dinghy stowage

 

Wow that’s light!

When offshore do you use chicks on the deck and deflate or just strap it down inflated?

 

Likewise I’ve never seen the pudgy before - love a dinghy with a sail !

 

All the best

 

 



On 17 Jul 2020, at 14:31, INUS - BUSCH via groups.io <inusbusch@...> wrote:



@ Aras:  

I have never seen a Portland pudgy, it looks nice and sails!

What I have is a UL 270 Aluminum from 3d tender, inflatable with aluminium bottom, which fits on the fore deck of my sharki, weight is only 28 kg!

 

Dieter

Fal-lera, Sharki #135

 

Von: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> Im Auftrag von Aras
Gesendet: Donnerstag, 16. Juli 2020 15:16
An: main@AmelYachtOwners.groups.io Group Moderators <main@amelyachtowners.groups.io>
Betreff: Re: [AmelYachtOwners] Vintage Maramu dinghy stowage

 

I traded in our inflatable for a Portland Pudgy. She tows quite nicely, however on longer passages I do have to mount it on the foredeck.  AS with the Maramu,  the Sharki's stern tapers quite a bit and the aft deck is not quite big enough to stow the Pudgy there.  So far I've been  stowing it upside down.  It makes it a bit harder to load and unload off the deck. I'm working on building a new cradle that would allow me to stow upright.

 

One other option I'm thinking about are low profile dink davits made of carbon fiber [the mizzen boom overhangs transom].  The davits would help greatly on short passages and make it easier to move boat around in tight places and improve visibility. Does anyone know of an outfit that works with carbon fiber?

 

Aras Grinius

S/V FIASCO

Sharki #163 1988

 

On Wed, Jul 15, 2020 at 2:15 PM smiles bernard via groups.io <smilesbernard=yahoo.com@groups.io> wrote:

Hi there

I’d be really interested to hear of others Maramu dinghy choice wrt stowage
The transom of the Maramu is quite a bit narrower than the SM and later models - as such davits don’t feel right as any dink would overhang the sides If the boat a lot

Plus I have a much treasured Hydrovane on the back

We currently carry an inflatable and also a nesting affair I made

The nesting dinghy stows Inverted under the mizzen boom but that space is not big enough for the inflatable which I pack up and stow in the fwd locker

Really interested in the options people have explored.

Does anyone mount their dinghy right side up on the deck on the foredeck? I’ve seen a few SMs with this setup but feels tight re space on the Maramu

All the very best

Miles
Maramu 162


Looks like we are heading off as





--

Aras Grinius