|
sticky
How to do almost anything
#Wiki
All Group Members and Moderators, We have added a Amel Yacht Owners Group Wiki which can hopefully answer any of your questions regarding how to use the new group and its tools. When you are online at
All Group Members and Moderators, We have added a Amel Yacht Owners Group Wiki which can hopefully answer any of your questions regarding how to use the new group and its tools. When you are online at https://amelyachtowners.groups.io/g/main you will notice "Wiki" in the left column at the bottom. Click on Wiki to discover what you can do. The Wiki also includes a section for Moderators. Most of the content in this Wiki was provided by group.io, our host. I hope this helps you. -- Best, Bill Rouse Yacht School 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970 My Calendar
By CW Bill Rouse
·
|
|
sticky
ZOOM Meeting Technical Questions: 3 messages
#ZOOM
For those planning to attend the ZOOM meeting, please post questions to the Topic " ZOOM meeting technical questions" by replying to this email. Tilo Peters will likely respond to these technical ques
For those planning to attend the ZOOM meeting, please post questions to the Topic " ZOOM meeting technical questions" by replying to this email. Tilo Peters will likely respond to these technical questions. -- Best, CW Bill Rouse Amel Owners Yacht School ( http://amelownersyachtschool.com/ ) 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970 My Calendar ( https://preparetocastoff.blogspot.com/p/calendar.html )
By CW Bill Rouse
·
|
|
Forward Looking Sonar 23 messages
I had the EchoPilot 2-D on my boat when purchased 10 years ago. I found it of little use because it only sees a little over a boat length ahead when you really need it in water less than 4M deep. In m
I had the EchoPilot 2-D on my boat when purchased 10 years ago. I found it of little use because it only sees a little over a boat length ahead when you really need it in water less than 4M deep. In m
|
By karkauai
·
|
|
Curtain Sizes for SM2000 13 messages
I'm wondering if anyone has the dimensions of the interior curtains for a Super Maramu (Forward Cabin, Salon, and Aft Cabin). I want to make new ones but unfortunately neglected to take measurements b
I'm wondering if anyone has the dimensions of the interior curtains for a Super Maramu (Forward Cabin, Salon, and Aft Cabin). I want to make new ones but unfortunately neglected to take measurements b
|
By briantrautman@ymail.com
·
|
|
Maramu Helm Seat 5 messages
I have a client looking for an original Maramu Helm Seat. Let me know. Bill CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 <+1+832-380-4970> | brouse@... Address: 720 Winnie, Galveston Island,
I have a client looking for an original Maramu Helm Seat. Let me know. Bill CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 <+1+832-380-4970> | brouse@... Address: 720 Winnie, Galveston Island,
|
By CW Bill Rouse
·
|
|
Source of double lipped seals in the EU 13 messages
A good Austrian run yacht services business in Greece is having difficulty sourcing double lipped seals for two Supermaramu genoa gearboxes ( not ours ). They normally import them from an SKF agency i
A good Austrian run yacht services business in Greece is having difficulty sourcing double lipped seals for two Supermaramu genoa gearboxes ( not ours ). They normally import them from an SKF agency i
|
By ianjenkins1946 <ianjudyjenkins@hotmail.com>
·
|
|
Does the faux teak prevent one From seeing damage before it is too late? 4 messages
#solution
If the white sub teak gel coat gets damaged, can the faux teak prevent one from seeing the problem before it is "too late" and one is subject to a saturated balsa core? Is there a horrendous argument
If the white sub teak gel coat gets damaged, can the faux teak prevent one from seeing the problem before it is "too late" and one is subject to a saturated balsa core? Is there a horrendous argument
|
By Daniel Alexander Thompson
·
|
|
Remote control furling 5 messages
Hello, Has someone installed a radio remote controls for furling or unfurling? where did you find these remote controls.? Thanks Denis ex Meltem #32
Hello, Has someone installed a radio remote controls for furling or unfurling? where did you find these remote controls.? Thanks Denis ex Meltem #32
|
By Denis Foster
·
|
|
Mango VDO Fuel sensor replacement 3 messages
Hello fellow Mango owners. My port side fuel sensor has finally given up the ghost and died. I did all the troubleshooting and narrowed it down to the sensor. Has any of the Mango owners on here repla
Hello fellow Mango owners. My port side fuel sensor has finally given up the ghost and died. I did all the troubleshooting and narrowed it down to the sensor. Has any of the Mango owners on here repla
|
By Arlo
·
|
|
Group Insurance questionnaire 6 messages
Please let us know your thoughts, what ever they are, regarding a possible Amel owners group policy. Here is a beief survey to assess interest. It only takes a few minutes and will determine if there
Please let us know your thoughts, what ever they are, regarding a possible Amel owners group policy. Here is a beief survey to assess interest. It only takes a few minutes and will determine if there
|
By karkauai
·
|
|
Mango Refit? 3 messages
Hello to all! We are a couple looking for a sailboat to live aboard within some years and perhaps crosse some oceans. Obviously, we have on the radar the Amels, perhaps a Santorin (the SM are a bit of
Hello to all! We are a couple looking for a sailboat to live aboard within some years and perhaps crosse some oceans. Obviously, we have on the radar the Amels, perhaps a Santorin (the SM are a bit of
|
By CDG
·
|
|
Pilot bulb bilge pump 3 messages
Hallo, I had to replace the pilot bulb of the bilge pump on the 24v panel. The red cover was fixed with some silicon like stuff. What is the correct way to fix this cover? It is not staying in place w
Hallo, I had to replace the pilot bulb of the bilge pump on the 24v panel. The red cover was fixed with some silicon like stuff. What is the correct way to fix this cover? It is not staying in place w
|
By Eloi Bamberg
·
|
|
Super Maramu interior upgrades 15 messages
I was just wondering what physical upgrades owners of the super Maramu have done to their interiors besides A change of curtains etc. Fair Winds Eric Kimberlite Amel Super Maramu #376
I was just wondering what physical upgrades owners of the super Maramu have done to their interiors besides A change of curtains etc. Fair Winds Eric Kimberlite Amel Super Maramu #376
|
By eric freedman
·
|
|
Lofrans Tigres Windlass gipsy 12 messages
Last season I found that my gipsy slipped despite tightening the wing nut down as tight as I could (used a few taps from a hammer at one point). I've owned Celtic Cross for one season and I'm going to
Last season I found that my gipsy slipped despite tightening the wing nut down as tight as I could (used a few taps from a hammer at one point). I've owned Celtic Cross for one season and I'm going to
|
By David Kurtz
·
|
|
Amel Mango in Split - Can somebody take a look at it for me? I'm happy to pay for the Service. 11 messages
#solution
Hello Guys I'm currently hoping to purchase an Amel Mango in Split, Croatia. Right now, I am in Panama City and unable to get to Croatia in the next four weeks. I am hoping there be an Amel owner in S
Hello Guys I'm currently hoping to purchase an Amel Mango in Split, Croatia. Right now, I am in Panama City and unable to get to Croatia in the next four weeks. I am hoping there be an Amel owner in S
|
By Daniel Alexander Thompson
·
|
|
Mastervolt Batery Monitor 9 messages
I have Mastervolt BM on my SM that is not working well as it is shoving only positive values of current and very fluctuating (changing value all the time), remaining time is not shown, Ah are unreliab
I have Mastervolt BM on my SM that is not working well as it is shoving only positive values of current and very fluctuating (changing value all the time), remaining time is not shown, Ah are unreliab
|
By Slavko Despotovic
·
|
|
C drive drain bolt 6 messages
I'm in the process of replacing the shaft bushing on my SM. How do you make sure the drain plug with the large slot for the line cutter is allaigned and firmly tighten at the same time? I was thinking
I'm in the process of replacing the shaft bushing on my SM. How do you make sure the drain plug with the large slot for the line cutter is allaigned and firmly tighten at the same time? I was thinking
|
By Paul Osterberg
·
|
|
Amel 55 fuel tank guage accuracy 3 messages
I've been running my boat in the marina this winter with the diesel heater running. It was down at a quarter in late Dec so I filled it with 103 gallons. I had fuel coming up the fill pipe in to the o
I've been running my boat in the marina this winter with the diesel heater running. It was down at a quarter in late Dec so I filled it with 103 gallons. I had fuel coming up the fill pipe in to the o
|
By Billy Newport
·
|
|
great source for watermaker membranes. 13 messages
I was looking for new membranes for my watermaker and found this company. I needed SW30-2540 not only are they huge they were the least expensive by quite a bit. https://www.evoquaadvantage.com/produc
I was looking for new membranes for my watermaker and found this company. I needed SW30-2540 not only are they huge they were the least expensive by quite a bit. https://www.evoquaadvantage.com/produc
|
By eric freedman
·
|
|
Vindvane on a 54? 16 messages
To all owners of a 54, did anyone try to fit a 54 with a vindvane? I do not rmember clearly but I think I have seen pics of an 54 steered by a vindvane. Thanks Martin Mago del Sur - 54#40
To all owners of a 54, did anyone try to fit a 54 with a vindvane? I do not rmember clearly but I think I have seen pics of an 54 steered by a vindvane. Thanks Martin Mago del Sur - 54#40
|
By Martin Birkhoff
·
|