Hello all. My old AMFA bilge water pump broke the membrane and I haven't been able to find a replacement. Can anyone recomend where to find them? In case I don't, I will have to buy a new pump (which

Inspecting my Antal deck cars I note the white ball bearings are crumbling and the brown still good. I guess that the Brown are the Torlon ones and the white are Delrin. I have measured 6mm. Can anyon

Any rigger will stock the balls for the Antel Car US or foreign. Usually cost is about 50 cents per ball. When replacing the balls you may look at the shackle as provided by Amel. The Amel unit has a

I would appreciate your opinions and experiences on currently available offshore PFDs with harness -- Paul Harries Prospective Amel Buyer

Hi Guys does anyone know if there is a dockside fuel point in Ambon Harbour? Or is it jerry cans to the local gas stations. Bob Grey Renaissance III A55 #25

Hey Team. I would like some feedback from members who have installed jacklines to their Amel. We intend to fit some to Jaygo and have high quality webbing for the job. (Reason for webbing: Strong. No

Dear Amelians, We are about to remove the masts and haul out for the winter. It will be the first time for us so we do not fully understand the best procedure regarding the removal of the forestay/gen

See below. CW Bill Rouse Watch Webinar One Contact our Support Team with any questions you may have. Register For Webinar Two

Hi All, Is there a preferred orientation to the rope cutter when reinstalling or one way only. I know the anode goes into the notch but then you have another free floating piece that can be fastend do

Turkey manufactures solar panels. I just replaced my old 265w X 2 for 410W X 2. They are the same width at 1m and only 35cm longer. Fitted on my arch without adjusting the fixing positions. The outfit

Does anyone have the part number for this motor, now no longer made by Iskra ? I am corresponding with a supplier who claims to have an alternative motor but I need to make sure that he is quoting aga

Hi amelians The BAMAR 1.02 of my staysail stopped working. I tested the motor and it worked. Unfortunately, the BOXTRON electric box needs repair or replacement. The green led inside is not on. Does a

Paul Is the president of BAMAR USA

SM 422’s black water tanks function normally, for now. During our recent haul out I changed the ball valve in the aft head. During this process I noticed that the tank bottom’s copper fitting was corr

https://youtu.be/G8LmSX-vEys Thought this vid might be interesting to those noodling on how to fly 2 headsails or ballooner w 2 track foil. Dave Bruce Liesse SN006

Hello! I want to equip my Amel SM with a second set of downwind poles. I just got a quote from Sparcraft, the original supplier of the poles. The quote came in much much higher than expected... Any id

G'day to All, Working on a friends boat we accidentally ordered a 24V version of a pump he needed in 12V. Thought maybe an Amelian might be able to use this pump. Brand new, in the box, never used. Ju

I am sure there are good Amel riggers in Europe. I know Nicky Sammut from Malta is one of them. I have recommended Nicky to dozens of Amel owners. Every time I recommend Nicky, I get a really nice tha

Dear Amelians We are en-route from Brindisi, Italy to Southern Spain (perhaps Marina Almerimar) We will sail via the Strait of Messini, Palermo then Sardinia, before stops in Ibiza and Mallorca. Does

Hi all Amelians, After almost 15 years enjoyment of two great models of Amel sailboats (a Santorin # 69 and a Super Maramu 2000 # 351) I decided to end my boat ownership. So, I sold Kavanga to a new o