Hello Everyone, The lines to support the downwind poles on our Sharki were missing (except for one) when we purchased our boat back in 2006. The setup I rigged up has worked for many years but is also

Domestic reverse osmosis filter for tank water Still my best investment in terms of ROI. Reverse osmosis filter. Have one at home, so I know it's simple and reliable. Was surprised to find it in the b

Hi group, I need to replace on of two sensors that control up and down position of pasarella. I managed to unscrew it from the bracket. Does anyone know where sensor cable ends? As far as I can see ca

Hello, I know that some of you, including Bill R. many years ago, have had great experience with Emek Turkey. Would anybody be willing to share their recent experience with Emek (building a stern arch

Greetings All, I have posted this on the victron forum without a clear consensus so here it goes. I will be hauling out and storing boat for appx 7 months this winter. I have a skylla I charger, solar

Hello Amelians We're en-route to Sicily. I was sleeping. I gave Anette instructions to check the engine temp constantly dial while at the helm. She said that she heard the engine increase in revs for

All Amel owners, Judy and used Noonsite.com for much of our information regarding foreign ports, worldwide. We found it to be the best and most complete information available. Noonsite was founded by

Help! i found this tool in my box. What is it for? Martin AMEL54 #149 „CHIARA“

Help! I found this tool in my box. What is it for? Martin AMEL54 #149 „CHIARA“

Hi Amelians, can anybody tell me if there exists a declaration of conformity for the Sharki ? They require it in Spain Alexander Burger Sharki #17

These switches are involved with raising and lowering the bowthruster on a 1988 Mango. Does anyone know where to source these switches? Thank you Andre Kaplan Renaissance 2000 1988 Mango Westport, CT

Hi all, After dissembling my bilge pump I found that the water-side plastic-coated large washer’s plastic (PVC?) is in pretty bad shape – see the image below. Unfortunately I do not see a spare one in

To all, I want to sell my Sharki 1980 #17. More information in the subgroup "yachts for sale" Aexander Burger

Hello Everyone, A future Amel owner who is going to view his first Amel Super Maramu. I have been working with a very knowledgeable broker on Amels and he has provided me with some excellent insights

To: A54 owners and others that have seawater heat exchange for refrigeration Recently an A54 owner found his refrigeration efficiency problem was caused by an 80% blockage in the Primary Saltwater Man

Our Amel Group Platform (groups.io) will be down for approximately one hour to perform routine maintenance. This will begin on Monday, 26 September at 1600 UTC (4:00 PM). Corrected to include Time Zon

There's a cold beer / glass of wine for anyone who can solve this mystery . Today we found fresh water in the bilge to port. Maybe 10-15 litres. The water was in the bilge under the sink and also in t

Hi everyone, Does anyone know the dessalator WM high pressure pump capacitor specification (D 60). Mine blowed up :( thanks in Advance JP -- Jose Prieto SV Wayag, SM 323 Currently Sicily, Italy

I recently had a client who had major issues with his bow thruster motor. To the point that the rotor needed rewinding, and a new commutator was required. It took a while, but a wing and a prayer sugg