Afternoon, looking for some wisdom/advice…. I just completed my first bow thruster maint. While reassembling bow thruster with new lip seals I ran into an issue with the small seal that goes over the

Dear all, A few days ago I dismantled my original SM fresh water pump to clean off lots of rust on a body of electric motor. Did that, gave it a lick of paint, installed it back and it is no longer wo

Last year I had new plastic windows on my spray hood as the old had gone opaque. I have spayed the whole thing with waterproofing agent but the stitch holes around the new windows drip a bit in rain.

PredictWind Presentation by Keyrn McMaster, Ocean Racer and Executive with PredictWind When: Saturday, June 18, 2022 20:00 to 21:00 (UTC+00:00) UTC Where: Group Zoom Meeting Organizer: Bill Rouse brou

If you go to the photo section of our site and look at the large file of Kimberlite. You will see a series of photos of how I replaced the veneer on the companionway without removing the dodger. It to

Hi, When I click on this link, https://amelyachtowners.groups.io/g/main/album?id=270917 I do not see the column top the left of the image you sent me. What am I doing wrong? Fair Winds Eric Kimberlite

The countertop refrigerator on Wilna Grace has died, can anyone recommend a refrigeration engineer in Preveza please? -- David Crisp SV Wilna Grace Amel 54 #58

[cid:364f5ae9-3469-49a2-8f89-50f0e705dbae] ________________________________ Sent: Friday, 17 June 2022 2:11 pm To: main@amelyachtowners.groups.io <main@amelyachtowners.groups.io> Subject: FW: [AmelYac

Where is the photo section located on the Amel website? Fair Winds Eric Kimberlite Amel Super Maramu #376 From: main@AmelYachtOwners.groups.io On Behalf Of Ken Smith Sent: Sunday, December 19, 2021 9:

On Kimberlite which has a Yanmar, I have every spare part that can be replaced at sea. My spares have all gaskets, including the head gasket. All senders, starter, pumps, both alternators, hoses, the

Hi all, We have the Maramu #98 1981 with the infamous, invincible "Mr Perkins" engine, 4.154 M. Well, he's overheated on us ( the alarm didn't sound and luckily my husband just happened tobe looking a

Hi everyone, We are in the acquisition process of a A54 for a world tour. We are looking for a Spare Parts List for the Volvo D3 110 engine as well as for the boat. Your help will be very appreciated.

All, Regarding the bushings pictured below for the genoa furler, the manufacturer for Amel of the genoa furler says, "The pictured part is not of my manufacture, it could be for the very first genoa g

Hello All, I am hoping someone might have done a bit of thinking on this question, who has greater insight on AGM chemistry than I. My questions surrounds storage of AGMs and solar charging. I have no

Hi all, I am being asked from a marina for a hull and blocking plan for a haul-out I have scheduled in couple weeks. By this I am assuming 1). where the slings should be placed along the hull and 2),

I use kit from Bimble Solar, here in the UK, works very well..... Follow links below for more details...... https://www.bimblesolar.com/offgrid/dumpload https://www.bimblesolar.com/offgrid/dumpload/du

Hi Brainstrust, The Volvo workshop manual details the process for changing the timing belt, requiring a bunch of specialised tooling. Mark Mueller from SV Brass Ring posted a fabulous summary of how t

We have an santorin with no generator but have 1000 Watts of solar. 400 of those watts are shaded - 200 is behind the main mast flexible panels and 200 is on the new hard top bimini (room for more) Th

Hi Amelians, I'm having a problem with the chain counter sensor of my Lewmar V4/5 windlass (Amel 54). The control head unit in the cockpit is the AA560. I assume this sensor is just a reed switch whic

Hi, all, I am at a yard where I am going to have the intake and output copper pipes and hoses replaced in both heads. They are talking about removing the inboard panel (with the cubby holes) for acces