Paul, Could you send me a photo? Kimberlite@.... Will you be in SXM march 18 and on? Fair Winds Eric Kimberlite SM 376

I have a Perkins 4.236 in my vessel and I replaced the old Vetus Sea chest with a new Vetus 1320 model.(the lid was cracked and is no longer available) When I turn off the engine the water in the sea

Hello, Can anyone advise which large turning blocks should be used for the genoa sheets? There are three models that fit the 18mm line diameter (3/4"). There are differences in their construction and

Hi All, Just a brief heads-up that we on PERIGEE are almost finished the refurbishment of our Engine Room Hatch - cutting out the rusty metal sub-frame and rotted balsa core, replacement with G10, fib

On the aft side of the genset there are the battery cables attached to positive and negative studs. Additionally, attached to the negative stud are two blue wires connected with a crim ring. On the po

Our SM has a full inventory of Q Sails and I have been very happy with the quality, build and performance of these sails. I received a quote for a QSails Code Zero along with furler. The price quote I

As some of you may recall, in January I posted a notice regarding the availability of SM Genoa Furler rebuild kits made by the original manufacturer to Amel (OEM). I negotiated a free motor for you in

I have been running all over Kimberlite trying to find out where the 24+ volt bus is somehow connected to the bonding. I have turned off all the circuit breakers I could find. Being that they are conn

Has someone installed a septic tank sensor? If it's not, how do you know the tank is close to overflowing?

1st time asking a question, where can I find parts or the entire swim ladder / dock boarding ladder. 2nd question: where to find rear motor mounts for my 1980 Mango. Thanks

We are changing brands and size so selling our basically new dingy. Mares AB model VSX-10 5 Person RIB dinghy with center console, chartplotter, auto bilge pump and depth sounder. Yamaha 25hp 4-stroke

Hello every body has somebody got a good replacement for the end pipe if the anchor wash ? thank you all in advance Nicolas -- Nicolas Klene DarNico SM2K # 471 In Marseille

Hi everyone, I am measuring and planning to do a new dodger / enclosure for my SM... at the yard last weekend and forgot to measure the stainless BOW DIAMETER. Does anyone know this off-had as to save

Dear Amelians, We are on the dry to perform maintenance this winter and have taken off the masts too for maintenace and touch up . We like to sand the bubbled paint areas on the masts where oxidation

Anyone know anything abt this boat, seem like a really good price.

Hi everyone, Does anyone know where I can source replacements for the curtain gliders? or an alternative. I checked with SAV and AMEL doesn't have them. On the web there are so many different variatio

My fresh water accumulator is beginning to show signs of a deteriorating internal bladder, ie the electric pump is beginning to cycle on and off in short bursts. I cannot see any makers name on the ve

Hi, The reason for any water, clean or otherwise, flowing back in to the bowl, is the failing of the back flow valve in the main line from the macerator to the tank. It is a simple change that will so

Pictured below is the original freshwater pressure pump. It works just fine, after 16 years, but I have no spare pump nor service Kit for this one. I have never pulled it apart, and have no manual. I

Hi guys, did anybody do this? I need to put the cable from engine room to aft locker by the port side. There is the easy path like shore power cable goes. But there is something uncertain between the