I have some spots on the cushions against the hull and under the mattress. What have some of you used to remove these spots? It’s probably some kind of mold. Fair Winds Eric Kimberlite Amel Super Mara

All, I think it is time to give something back that many of you can use and will hopefully benefit from. I recently changed the pages and the online access to my Online Amel Book. This 400-page book r

The heck fender of my Amel Santorin from 1990 is damaged, see picture. Spare part from Amel is unlikely, does anybody have experience with repair? What glue would be suitable for thsi foam constructio

I have recently given out the contact information of the Swiss guy who owned the machine shop that made the genoa furler for Amel. Apparently, he has gotten greedy and is quoting outrageous prices for

I’m going to be hauling out at Port Navy Service for the winter and to do some work. The surveyor found a significant amount of moisture in the hull and has recommended sand blasting it in order to sp

Hello! I'm looking for inspiration on two topics for my early SM: 1) Aft cabin extra hatch above the bed. I remember I saw some pictures but I can't find them any more. What size did you take? Any rec

I’m trying to decide where to base Trippin this upcoming season in the northern Caribbean. To me good safe dockage and ease of flights from the states are important considerations. Would appreciate yo

Our vote for carénage (Repairs & Maintenance; Fitout) in the Caribbean: 1. Martinique, for all and anything AMEL-specific stuff, including(for example) running cables and installing for new cabin fans

Greetings! I have a F.E.I.T. AM992I SP12E 24V/24A fresh water pump to offer free to a good home, just shipping cost. The pump has done service in RIPPLE since she was built. It comes with the manifold

Dear Amelians, regarding the manual furling gearbox: In the drawings are no dust cover, but in reality - see pictures. It is ID 55mm, OD 62mm, appr. 6mm high - as far as I can measure. But there is no

All, Before ordering anything directly from ACMO, please check with me for some updates. Also, you will be pleased to learn that I am discussing the possibility of adding another Preferred Vendor, who

Hi Amel owners: I just wanted to pass a quick Kudos note to QSails and an FYI to the groups regarding new sail purchases. I just purchased a new main made of Fibercon Pro Hybrid (dyneema supposed to b

Hi 54 Owners, does anyone have "General Arrangement Drawings and Lines Plan" for the Amel 54? I need it for a tonnage survey. Just trying here and the FB group before contacting Amel next week. Thanks

A quick inquiry to see if any SM/SM2K owners will have their boats in Annapolis during the 2022 Sailboat Show in October and would be amenable to hosting a tour of their boat for a future Amel “family

Hi James, I have an SM, so not entirely the same...but here is my experience. When I purchased Kristy 8 years ago, the sails had been discarded. I was starting with a clean slate, but didn't know very

Akin to the words Bill has spoken about this group being great for assistance, I have relished in reading about the joys that I will have with my new Super Maramu. (Thanks JP!). One of the tasks that

Dear Amelians, With Mal and Stefan (Malaka Queen) we have been looking for the right Action Snap Switch /miniature switch/ micro switch for the bowtruster PCB (which makes the bowtruster going up and

Can anyone recommend a preferably UK or Gibraltar based attorney with excellent experience dealing with the EU vat fiasco, registration, maintenance of vat staus etc. -- Paul Harries Prospective Amel

Can someone provide the sizes for the two main furler seals that are circled in photo? I am not in a position to measure them at the moment and Maud at Amel says that she has different sizes. My boat