All interested, As you know over the years I have been a very strong supporter of ACMO, the standing rigging supplier to Amel. This support created a relationship where ACMO issued discounts of 5 - 10

Hi Bill, I will be in SXM next Tuesday. Where are you located? Fair Winds Eric Kimberlite Amel Super Maramu #376 From: main@AmelYachtOwners.groups.io On Behalf Of Michael Winand Sent: Sunday, May 08,

We've covered a few more miles than usual since covid and we've been wearing away the bottom paint at the point of the bow each season. We have added three coats of micron 66 on the bow each summer wh

I have for sale all AMEL 54 cockpit cushions as well as the aft deck sun lounge cushions. All located at or near HOPE ISLAND MARINA, QLD AUSTRALIA. Brgds Teun

Hi, I have the "Amel D50" Dessalator water maker. The tasting tap in the galley started leaking a lot. It is the quarter turn shut off valve type of tap. Where can a new replacement tap be bought and

Hi everyone, Q Sails, made 2019 and very lightly used, I have videos I can share for the condition. These were taken a week ago at our local sail loft. 1 x fully battened sail (no battens supplied), 3

This is one of those "do not let this happen to you!" posts. For those of you who have the B&G213 wind instrument that many Amels came equipped with, here is (I hope) a useful post to make sure it sta

Hi, I am interested to know if anyone has re insulated their settee freezer, I feel that the original foam insulated box is not performing much . I have not done a test on heat transfer, but feel that

Stefania Dente Euploia SN #93 Cartagena (Spain)

Anybody ever craned an Amel like that? With or without mast? -- Gerhard Mueller Amel Sharki #60 Currently North Sea, Germany

I cam across this document titled "Overcoming Lithium-Ion Battery Obstacles for the Alternative Energy Revolution", produced by Perkins Elmer, which may be interesting to those following the subject.

Hi Guys, covid is over, borders are opening, so I start my circumnavigation of the globe this Sunday from Melbourne, my current Australian insurer won’t entertain more than 200 miles from Australian w

Hello All, I have the crew I need. Now I would like to announce that Ladybug is again for sale in Martinique and will be for sale in Newport in early June after I have imported her. Ladybug is a one o

Hello All, Firstly, I am new to the forum having just purchased an Amel SM 2000. This particular SM appears to have been either directly struck by lightning (although there are no signs of this) or wa

Marc Augier <marc.augier@...> added folder /Type B Spurs Line Cutter for sale (Never Used)

Dear Amelians, We are renewing the electrical system for inverter, solar and wind and preparing for lithium. Amazing there is really NO fuse on the Bowtruster etc etc???? ..... Anyone any idea why not

hello amel group, I'm helping a current amel owner sell their Amel. - even though i don't own an Amel anymore they will always have a place in my heart. you can see the full pictures of the vessel on

Hi all, inspired by an SM we saw in La Rochelle, we modified the stern railing on our 54. It should be suitable for line drums in the future. Maybe some of you will be interested in the result (see pi

Hi everybody, I just have A54 out of water (since 03/03/21) today and see strange wear of anods: - 2 of rudder - both dead 100% - 1 of prop - dead 100% - bowthruster - 1 dead 100% (starboard) BUT THE

Hello all, Once again Ladybug will be sailing from Martinique to Newport, RI. I plan to leave Martinique on the 20th May, and I would like one more crew person. The other crew person has made this tri