Hello! I posted a few weeks ago about purchasing an Amel Sharki, and one question is if I want to re-flag it. Currently it has a French flag. I am a resident of the Netherlands, so I thought it probab

Dear Amelians, maybe you have/ had the same on your boat - regarding the Furuno NavNet VX2 screen on the helm station and the ICOM VHF on the nav table. Both screens show something like black or signi

Hi and Happy New Year to all. It is with mixed emotions that I tell you of the sale of Kristy to Wolf and Lisa Guenthert, from Houston, TX. They are relatively new to sailing and SM243 is their first

Time to replace the portlight and hatch seals on Minerva, Maramu #135. I looked in the wiki-how on this site, but the attachment with Bill Rouse’s response to a similar question was deleted. Does anyo

The current Sea chest needs to be replaced (See pic) and your insight on the best approach for the aft saltwater consumers is greatly appreciated. AFT Seawater consumers: Aft Head Engine Cockpit Washd

Hi All, As I replaced my single 511 autopilot with dual 711’s i have for sale a 511 computer and control unit with manuals. The units are in Australia and can be posted anywhere. Contact me on delborn

Dear all, I am the owner of a maramu 46 (Tortuga) . During my last sailing trips the steering wheel became hard to move. I took out the steering system to investigate the source of the problem and it

This is hard to find. This kit fits many Onan models...check to make sure it will work for yours: https://www.ebay.com/itm/264907641588?mkevt=1&mkpid=0&emsid=e11304.m43.l3160&mkcid=7&ch=osgood&euid=e3

Hi Steering to port is harder than steering to starboard on my SM. I cleaned the rudder, checked for loose steering cables, and they seem to be OK. I do sometimes hear a quiet metallic clunk when the

Happy Holidays group! We're upgrading our Santorin and currently looking for a new anchor. After considering a Rocna (and making a cardboard prototype) we listened to the resetting problems, so now we

Hello everyone, Please someone who is on board an SM, could you tell me the measurements of the amel logo on the sides of the boat? (bow and arrow height and width) Cheers Jose Prieto -- Jose Prieto S

A bit of a light-hearted distraction this holiday season. On our way to Tasmania, SV Jaygo ended up as the start boat at the 50th Australian National Hobie Championships in Jervis Bay. Here are a coup

I am selling my 1984 well maintained and loved Amel Maramu. The boat is ready to cruise, including Spectra watermaker, newer B&G instruments, wind generator, solar, newer AB aluminum dinghy with 15hp

Many of you remember Jimmy Cornell's zoom presentation to the Amel Yacht Owners Group (https://youtu.be/Hj79q2vez5c), and most of you know of Jimmy Cornell and his sailing adventures. Jimmy founded No

Thinking ahead to next year and making some plans. Can anyone recommend a good boatyard in the Fiji area? I would also appreciate thoughts on whether to get work done there or other alternatives westw

Helle, I joined just the group if the Amel Yacht Owners. Thank you for welcoming us! We don't not yet own a Amel, but we are soon considering acquiring Super Maramu, Maramu, Santorin. Currently, our c

Dear Forum, This week I finished a repair that may interest a few of you. From what I know quite a few A54s have had a repair to the foil inside the main mast. Our build number 121 has had a repair on

I need to adjust the pressure sensor. The system is shutting off in the green field. How much do I need to adjust in mm? Regards Arthur Sundqvist SM435 Vista

My wind direction and speed on my B&G Hydra sudden failed. No 0's , no nothing. I look up and the anerometer is spinning and the direction arrow seems to move accordingly. Is there a way to test the s

It might be time for us to replace our saloon air conditioner. This is a difficult fitment. It needs to be no more than 12" (305 mm) high, which takes a lot of units out of the running. Mermaid in Flo