Hello all, Can someone do me a favor and take a picture of the small, foot operated "peddle" that is used to open the trash cans in the SM head. I have attached a picture of the trash can I have that

And the last picture. Best Regards Teun SV AMELIT A54 #128 HOPE ISLAND MARINA (near BRISBANE) QLD AUSTRALIA November 1, 2022 06:21:05 You can follow AMELIT via this link: https://forecast.predictwind.

Following up on 1st Email picture of the glass fiber conduit after the 3 hoses removed. Best Regards Teun SV AMELIT A54 #128 HOPE ISLAND MARINA (near BRISBANE) QLD AUSTRALIA November 1, 2022 06:20:18

Morning, Last week we started passage from QLD AUSTRALIA to BAY of ISLANDS NEW ZEALAND. About 2 hrs out of the SeaWay I got several times a “rudder response failure” alarm on my AutoPilot #1. Long sto

I replaced the bracket that attaches the Mainsheet to the boom with a bracket fabricated by Ande Gilliam, Gilliam Welding, Hampton VA (757) 791-7710. They are about 40-50% longer to give your better h

Been a busy day today, got the rest of the bolts out, but still broke another two. The port side was the difficult side, starboard, despite the limited space. Removed the engine frame to gain access,

TO: All who have replaced the motor, Please view the attached photo. The motor on the top was included in the Genoa Overhaul Kit and matches the motor in the kit photo. The motor on the bottom was ins

I learned something today with from a great 54 owner, from Dessalator, and from reading the recent specifications sheet for Filmtec SW30 membranes. · The actual pressure for the Green Zone on a Dessal

Does anyone have an opinion, experience with the fiberglass arch that some 54s? Was that a factory option? How strong is it? Good option for solar array?

I think Franck Chivé / larochelle-greement.fr could give you more informations, because I think installation etc was done by him. Wolfgang Weber SY ELISE Amel 54 #162 - happy to have no solar arch or

Hello, I am wondering if the vented loop on the Onan, (MDKAV), generators are all mounted up against the ceiling of the engine room as seen in the attache photo ? This is how the vented loop is instal

Paul, Could you send me a photo? Kimberlite@.... Will you be in SXM march 18 and on? Fair Winds Eric Kimberlite SM 376

I have a Perkins 4.236 in my vessel and I replaced the old Vetus Sea chest with a new Vetus 1320 model.(the lid was cracked and is no longer available) When I turn off the engine the water in the sea

Hello, Can anyone advise which large turning blocks should be used for the genoa sheets? There are three models that fit the 18mm line diameter (3/4"). There are differences in their construction and

Hi All, Just a brief heads-up that we on PERIGEE are almost finished the refurbishment of our Engine Room Hatch - cutting out the rusty metal sub-frame and rotted balsa core, replacement with G10, fib

On the aft side of the genset there are the battery cables attached to positive and negative studs. Additionally, attached to the negative stud are two blue wires connected with a crim ring. On the po

Our SM has a full inventory of Q Sails and I have been very happy with the quality, build and performance of these sails. I received a quote for a QSails Code Zero along with furler. The price quote I

As some of you may recall, in January I posted a notice regarding the availability of SM Genoa Furler rebuild kits made by the original manufacturer to Amel (OEM). I negotiated a free motor for you in

I have been running all over Kimberlite trying to find out where the 24+ volt bus is somehow connected to the bonding. I have turned off all the circuit breakers I could find. Being that they are conn

Has someone installed a septic tank sensor? If it's not, how do you know the tank is close to overflowing?