I just got delivered Aqua Signal 34 LED Tricolor plus anchor navigation light. Regarding voltage it is written 12/24V. I can not find the max voltage for this lamp. Should I convert 24V to 12V to be o

Dear fellow Amelians, Does anyone know power characteristics (kW or Amps) of Super Maramu 2000’s (2004 onwards) bowthruster and whether it has any fuse or disruptor, apart from the one on the 24V boar

Hello, I have been on the site for a few years and have interest in eventually purchasing an Amel for cruising in retirement. My wife and I would like to see if there are any Amels that could be visit

Hello Group: Eric and Robyn here on LIBBY, SM#196, 1997 build, sailing out of Los Angeles Jib furler motor stopped working. Removed cover and found a handful of salt residue up to and in the brush set

Hello, I just ordered a Starlink RV and try to figure out where to mount the antenna. I would prefer to mount it fix under deck. The only place I found till now is above the chart table in the middle

I was recently watching a random YouTube where the boat owner was replacing his storage hot water system with an on demand electric heater. I dont like changing Henry's well thought out systems though

The generator was running fine, was a way from the boat for a month and tried to fire up my Northern Lights generator, on the control panel no green light, and the I press the start button the Sea Fir

Hi all, We want to replace the upper shrouds, middle shrouds and lower shrouds of the main mast . Is there a recommended rigger on the French or Spanish Mediterranean coast? All the necessary material

Good Morning, I just received news that the motor in both my barely used BAMAR EFJ furlers are shot (=dead) ☹ Since I am now looking for at least the 3rd (that I know off) but possibly 4th set of elec

Time to replace the portlight and hatch seals on Minerva, Maramu #135. I looked in the wiki-how on this site, but the attachment with Bill Rouse’s response to a similar question was deleted. Does anyo

Hello, I wonder if anyone can help me identify this little thing I found on deck yesterday? I located it on the starboard side at the rail close to the aft cabin but it could have come from anywhere.

Good morning! I have discovered one of my floorboard hatches is broken and needs replacing. I emailed Maude a couple days ago and am awaiting a reply. In the meantime I thought I’d check with the grou

Although my Feruno Navnet does not come up with the internal battery warning I want to change it. I suspect it is at least 8 years old and maybe original from 2006. I would rather not ship the unit to

Hi, can someone suggest good quality G4 LED lights that you been happy with? In the past month I replaced 4 lights, so now researching and looking for something that would last claimed thousands of ho

Does anyone know of a source of the continuous soft shackle shown in Bills image below? Location USA. Fair Winds Eric Kimberlite Amel Super Maramu #376 Main Mast External Halyard Block:

Amelians, I have been reading through all the posts trying to sort out the engine room fire extinguishers. The long skinny one on the stb side of the companion way that is manually actuated appears to

HI, Does anyone know of a distributor of the sheaves for the topping lift on the mizzen. USA preferably. Fair Winds Eric Kimberlite Amel Super Maramu #376

Every Amel SM owner should be aware that the Leroy Somer 24v electric motor for the bow thruster is no longer available. I believe the number was TF-15 with maybe a few more letters designating the ac

Hi, I keep finding some water in the aft lazarette and want to install an automatic bilge pump there. I've found water on port under the floor board, in the separate compartment for the rudder and aut

Hi everyone! I found on the forum, many advices regarding the membrane replacement that was very helpful. Im posting a picture from one of the end caps that is crumbling. I spoke with a technician fro