Hi all, Would anyone know if it is possible to buy Jabsco quiet flush motor and minor service kit in Galveston? Also the Frigoboat seawater pump? Cheers, Paul Paul Dowd & Sharon Brown S/Y Ya Fohi, Ame

Has anyone used the boom to remove the engine or the generator? If so, how did you support the boom? I saw an engine being replaced in Martinique, but unfortunately I did not look closely. Is it possi

Hi everyone: I am looking for replacement instrument covers for my 4 B&G analog displays. Mine are beginning to fall apart. Maybe someone out there has a few that they are willing to part with for the

Hi all, Our search for an Amel is picking up speed. As we live in the Netherlands, and we found some Amels along the most southern Mediterranean coast of France, we're looking for a good agent + surve

Hi Daniel, Several things here – and I am no diesel mechanic – although I do try to distil the best operating practices from those marine mechanics who seem to know a thing or two. And like you, not p

Sometime ago there were several posts regarding the need to service/replace the gearbox oil cooler as a preventative measure. From memory there is a supplier in the Uk, any advice, contact details, co

Has anyone replaced the Climma compact 9eh unit in the saloon? I replaced the aft cabin one with a Dometic, but it will not fit under the seat in the saloon. Fair Winds Eric Kimberlite Amel Super Mara

Hi Bryce, This info is about 5 years old. I put the bigger oil cooler in. You must order it with the correct end caps as per the drawings in the catalog. Fair Winds Eric Kimberlite Amel Super Maramu #

It took about 4 hours to mount the Dometic AC unit. What took time was putting together hose adapters for the larger Amel hoses and smaller Dometic supply hoses, and the drain hose. My only concern is

I wanted to put the same Ac unit that I had in my cabin into the saloon. Here is a photo of the space for the Ac unit without the Climma unit installed. Please note the connector between the water hos

My saloon AC unit died, and It had to be replaced. I decided to remove the unit to save some time with the technician. The AC units are fed from water below the water line. When I removed the hoses, I

This is from a book by Peggy Hall called the Head Lady. She used to own Raritan water systems. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi we have a current of 25,9 V to our heat sensors at both Onan generator and to the main engine, even though we turned off the ignition key? is this normal or what do we need to check? very grateful

Hi group sometimes good news can be shared :-) just received the new sails (main and mizzen, pro radial) from QSAILS. They arrived just in time and look great. We ordered in February, agreed deadline

My outhaul winch has developed a screeching noise - see the attached video I've confirmed the noise does not originate from the outhaul car. I've opened up the plastic box containing the motor and gea

All, My water temp sensor on the Yanmar is on the fritz. Indications are full-hot when powering the key to ON. (engine is OFF) Disconnect the sensor and the gauge reads zero. PART - Looked it up in th

Greetings, When our SM was last surveyed (insurance requirement), the surveyor noted some scratching and beginning crazing, and suggested I consider clear toughened glass as a replacement to either Po

--- In amelyachtowners@..., eric <kimberlite@...> wrote: > > I looked near the tanks on the hull and couldn't find anything. > Thanks > Eric > Fair Winds, > Amel Super Maramu #376 Kimberlite > > > ---

Dear Ameliens, The windows in the deckhouse of "Soleil Bleu" are getting fine micro-cracks inside the glass after 14 years. These are the two large hinged windows at the front and the two fixed window