Nauticool UK is a distributor of pumps, Air Conditioning, and Refrigeration in Europe. Their brands include Dometic, Calpeda, Gianneschi, and other brands used by Amel. I have negotiated a 10-20% disc

Hi all, just got new primer and Antifouling made by a professional company. what are these patches below the waterline? Gelcoat? thank you , Martin

Here is a photo of my salt water pump. There is slight rippling (see my wavy line) around the outside surface. Also the metal across the ends of the inlet & outlet has broken (see red circles) & is sh

I agree that using a double-lip seal shouldn't make any difference, but I do not know for sure, and I certainly do not know as much as the original designer. The only reason I wouldn't do it is: That

Hi all, Has anyone been able to remove the headsail traveller block (see photos below)? The bolts seem to inaccessible to any normal tool. Cheers, Paul Paul Dowd & Sharon Brown S/Y Ya Fohi, Amel 54 #9

Hey Team. Jaygo SM 224 has the cabin sole panels where you access the bilges, only secured with Velcro tabs. I believe this is original. As we are doing more offshore sailing (& about to cross the dit

The lower guide on the main halyard mast exit box has broken....the black plastic thing in the middle of the pic....different box, same guide. Does anyone know where to get these ? Thanks Alan Elyse S

Hello we are janine and walter and proud owners of the Happy days an amel sharki no 53 year 82 we are looking for the b&g mhu 213 does anyone in this group have one left or no longer in use we would l

Hello! I need to buy new sails for my Sharki. I am thinking of going to North Sails in Le Marin, Martinique. Other suggestions accepted! For the Sharki, any special considerations I should take in loo

Hello! I finally arrived to Martinique to take over the Sharki i purchased. Unfortunately the dinghy is unusable. I have been dinghy hitch hiking. Does anyone have a suggestion for where I could purch

Hi all, Would anyone know where I can source replacements for the cockpit lights? Cheers, Paul Paul Dowd & Sharon Brown S/Y Ya Fohi, Amel 54 #98 tel: +44 (0)7710 466619 skype: pauldowd web: https://my

Does anyone have a source for this edge material? CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com Please Rev

We are starting our search for a well cared for SM 2000. There don't seem to be any for sale in the US. Does anyone know of a SM 2000 or later SM on the west coast? Thanks. Rayman Kinman -Future Super

Hello! In process to order lip seals for various devices aboard I use to order from 123Bearing.com. On their homepage one can read WHAT IS THE DIFFERENCE BETWEEN SINGLE AND DOUBLE LIP? A single lip se

When our 2002 Amel Super Maramu was 10 years old, we refitted it thoroughly, including the entire upholstery. The Captain hired an interior decorator and each cabin ended up with its own color scheme,

Hi all while replacing the primary manifold to the new Sofomarin model I checked all the hoses. I was wondering about the following: On our Mago the sea water line runs from the primary manifold acros

Hi, question to Amel Ketch-owners: does anyone have a WindGen like Silentwind/Superwind etc. on the Besan? Still thinking, I'd prefer to mount it on top away from where it "hurts" crew or could reach

I'm in the process of replacing the shaft bushing on my SM. How do you make sure the drain plug with the large slot for the line cutter is allaigned and firmly tighten at the same time? I was thinking

Hi, I could not find much information about this. I have spent a number of days labelling each wire I can find but am still a bit confused. I would be very glad if someone can explain what is going on

My boat has the modification of added greasing points on the furler gearboxes, and these are plugged with nylon screws. On one of these the head of the screw has torn off, I've tried using a screw ext