Hello Group Tom Deasy APHRODITE Maramu 1983 #125 I am having a problem with my electric furler, four years old and several thousand miles.It will unroll about 2 feet and stop it will not roll back up.

Here are a few photos of the finished jobOn July 7, 2020 at 12:47 PM eric freedman <kimberlite@...> wrote: Hi Tom Here are some photos of the rewiring. In the 4th photo is a black wire that Amel used

Hi Tom Here are some photos of the rewiring. In the 4th photo is a black wire that Amel used to connect all the negative sides of the senders. There were numerous connections and a few bad solder join

https://amelyachtowners.groups.io/g/main/files/Miscellaneous/_Kit%20isolation%20Yanmar.pdf Tom, I believe this is what you have. This is the newer conversion. I see the relay you are referring to. The

Canceled - ZOOM Meeting - Canceled, Presentation from the owner of QSails When: Saturday, 11 July 2020 20:00 to 21:00 (UTC+00:00) UTC Description: The owner and manager of QSails will be unable to att

Or, you can accomplish the same result using a couple of swimming noodles with a line through them and tied under the stern of the boat. With best regards, Mark Skipper Sailing Vessel - Cream Puff - S

Hello, I just become the owner of SM 2000 hull nr. 279. Name Bonne Anse. Boat speed is not working. Surveyer Oliver said that problem is in sensor. Any experince if I would change with sensor for dept

Reminder: ZOOM Meeting, Presentation from the owner of QSails on sailcloth and sail construction When: Saturday, 11 July 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to RSVP

My wife and I were faced with a fairly similar decision when we were weighing the money vs. size vs. age vs. condition of a Maramu and a Mango and a Super Maramu. Between the three there was over $100

When cleaning our bilge, we noticed the cap had come off of this (see pictures). It is attached to the tube that houses the bilge float and appears to be a switch. But I am not really sure what this i

So, engine doesn't start intermittently. After corrosion x in the solenoid, cleaning contacts, problem re-emerges. Can start engine by pushing button but need to fix this. Broke out spares purchased a

The following files have been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. /CockpitEnclosure.pdf By: Gerhard Mueller Description: Cockpit Enclosure for Sharki

I have just installed a new chartplotter with prexisting NMEA 2000/ Seatalkng components and spent significant time sorting out a problem with as it turned out a simple solution. The solution to compo

Reminder: ZOOM Meeting, Presentation from the owner of QSails on sailcloth and sail construction When: Saturday, 11 July 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to RSVP

well i have some crappy news...turns out my holding tank pipe is leaking. It is not the hose clamps. What are my options here...this is a santorin. Removal of the wall is pretty straight fwd i believe

Hello, as a potential owner of a Sharki from 1982 I am interested in knowing: 1. salon headspace (ceiling height) 2. dimension of mattress (sleeping surface) in rear cabin when maximized. Cannot find

Amel owners who did an engine replacement, please help! We are replacing the old Volvo penta engine with the new Yanmar engine. we have problem - vibration. Did you have such a problem? Do you know ho

We have a Desslator Duo 100 that runs on either 24v DC or 230v AC. According to the specs and our own measurements, the 24v motor draws 600watts and the 230v motor draws 1100watts! The AC motor draws

Furling Mainsail in HydraNet. New. Located in the US. see https://amelyachtowners.groups.io/g/ShareParts/topic/maramu_furling_mainsail_never/75216717?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,75

The electric consumption on our Amel 54 is getting high as we are now full time on our boat. We are ready to change to Lithium and also change from LP gas. Planning to install a 5000w 230v charger/inv