Dear Michael, This will not be what you want to hear...but it is the truth. All you need is a better gel coat man. Seriously, in the thirteen years the Super Maramu has been made, I've seen a lot of s

It does seem that cleaning the turbo should be a priority. I had my maintenance yard in Maine actual tell me that this is standard annual procedure with any turbo diesels they service. One other thing

Can anyone help me out with suggestion's on diesel heat for my Super Maramu? We sail in Northern California's cold waters, and running the gen set 24 hrs a day is not an option. Have any Amel owners i

I'm looking for info on the original sails plan for this boat and eventually on how to install a storm jib. Can anybody help me? Thank you. Rosario

Hi All, Bought a 1995 Super Maramu three months ago. AM hoping some of you experienced owners cananswer some questions I have. (1) Fuel Consumption - engine (TMD22) What is the recommended motoring sp

I am really surprised that your SM does not have a steaming light. Mine (#299) certainly did. This may give credence to rumours I have heard about owners having to pay extra for rail level navigation

Hello there, we have to install a self stearing sytem on our Amel Euros 41 (built in 1976) - is anybody out there to share experience with us to give some advice? I wrote to Amel and they told me I ha

Hallo Euros-Genossen (oder seid Ihr wirklich englischsprachig?), ich bin mit 3 anderen an einem Schiff wie dem Ihren beteiligt. Die Aella ist noch etwas aelter. Was wirklich supergut funktioniert an d

Hi Sylvia, on my euros 41 I have an external belt driven autopilot mounted by the steering wheel. However it coul be possible to install an autopilot over the sink, inder the cover. If you figure out

For many months we have had a whistling sound when running water but it was not audible when the freshwater pump started. The cause was a tiny leak from a hole in the pressure vessel located outboard

She has been maintained with TLC. You will see all info at http://users.starpower.net/jphjph email me for additional info JP

Chris & Mllie, Many thanks for the information, I currently own a Fango 33 and am looking to move up to a Santorin. If you hear of any going for sail I would be very grateful if you could let me know.

Hi everyone We have recently bought Sharki Hull no 24 and are in the process of making her ours!Have revamped the saloon, galley & head and are now onto the underwater. We need to replace the cutlass

I don't know if this is the proper forum, but please re-direct me if you have other suggestions. We have been trying to get the "real info" on what will be required of us if we plan to winter in an EU

We just used a large pipe wrench and rotated while tapping with a rubber mallet! No problem! Cutlass bearing was changed 6 years earlier. Cover new bearing in dish soap and wrap in tin foil and place

Hi Anne & John, you are not the only one to have a leak! I had one after just 3 months from new but the warranty replacement has lasted over two years with just a little rust on the outside around the

I would appreciate hearing from Super Maramu owners who have had an assymetric spinnaker made. Size, shape, overall area, material, cost......Thanks JP

Conversely to what you may hear the assymetric is a must on the SM. It is so convenient and efficient. It save you sometimes the hassle of gearing the ballooner. Prior to anything you must make sure t

Does anyone have photos of the sm under construction? I have seen some under the yahoo section of photos but i am interested in any and all additional photos of the boat under construction. thanks eri

erick, did you use the block (pulley) that was supplied by amel? thanks eric sm kimberlite