I cannot begin to tell all of you how impressed I am with Amel and particularly Thierry. They never fail to surprise me.. Last night Monday about 1-2 AM I wrote to Thierry at Amel with my tale of woe

Hello all. I will be installing a Navpod at the helm in the next week and aside from clearance on my traveler (far left of photo) and trying to preserve visibility to 3 or 4 of my raymarine instrument

Does anyone on the forum know whether Amel is open for business at the moment, or on summer holidays. I have emailed Maud at sav@... for availability for some parts and have had no response. Thanks, E

I recently rebuilt my bow thruster, . Upon leaving the dock today my bow thruster did not work and made a whirring noise. When I took it apart I saw that the gears were worn. My gears on my old bow th

I'm in the process to install LiFePO4 cells, I like to tidy up among some of the wiring, install some fuses etc. Now to my question. From the 24 V main switch there are 5 cables.one thick black cable

Hello Super Maramu or A-54 owners - (and particularly Scott Tengah) I am going to install a Victron 24V 5000W Quattro Charger/Inverter in my Super Maramu. As this has an internal automatic transfer sw

Here is a bit of summary of the LiFePO4 battery conversion that we have been through on BeBe over the last year. I’ll start off with a bit about ourselves as context for some of our decisions. Then de

Hello all Our wonderful Maramu is up for sale https://amelyachtowners.groups.io/g/yachtforsale/message/123 Ashore in Plymouth UK and ready to go anywhere All details available on request All the very

Our bimini fabric is worn and needs replacement. This is cheaper than we could find locally. The quote from Amel is for 1 914,19 Euros plus shipping and taxes, with delivery in 6 to 8 weeks. I am cert

Hallo, everyone anybody have any experience with the change the altinator 24 V.60 AH on a bigger one mybe 110 AH and if so, which light machines were used? The engine is a Volvo Penta TMD 22 B 1998 Th

Dear AMEL Groupies Is there a way to dain (pump/sucking) out bad Oil from the C-Drive while the boat is in water? Recently (after 3 years) I got water ingress into the C-Drive. I cannot go out on hard

Hello all. I am installing a new B&G system and looking at putting in the autopilot. The original autopilot works fine, but this will provide me some redundancy. I am looking to see if anyone has pict

Hi All, Is anyone staying this winter in Marina di Ragusa? I'm planning on being there from mid-November-ish depending on Covid and my Italian Visa. Jeff SM379 Spruzzo

Hi, I still have a few switches that were ordered but I do not have your addresses. Please send me your address and I will ship you the switch(es). You can mail me a check when you receive the switch(

Attached are some shots of the raised waterline. Zero at the bow to 5 inches in the stern. No more boot top scrubbing. I have all the numbers so it can be replicated. I had to grind off the entire bot

Will, This is an incredibly complicated question. I am not a tax or insurance advisor, but have been a physician for a long time, am a cruiser, and a US Citizen but also an EU resident. Below are obse

I do some services New elbow, cleaning the heat exchanger and turbo etc. My question what to do, if anything with the Stainless steel muffler? I have seen that some have had corrosion dammage is that

Does anyone know the size of the SM c-drive drain plug o-ring? Ian SM153 Loca Lola II

Hi, I have found these adapters very helpful for use with many hoses on Kimberlite. They come in 2 sizes. Fair Winds Eric Amel Super Maramu #376 https://www.vetus.com/en/plastic-hose-adapter-o-13-38-m

I was wondering if anyone has successfully sourced a 24 volt Fusion Marine stereo ? I could only find 12 volt systems on line. Thanks. Kevin