To All I have a 1988 Mango lying in Westbrook, CT. I’m considering repainting my deck, photo attached. There are no discernible leaks associated with the cracks. What are my options for repainting the

Hello, Hope this finds everyone doing well. Having trouble finding a supplier with this part. This is for the portside large electric ST58 winch. Does anyone have one for sale or know of a supplier wi

Philippe Merci Andre

For the desk epoxy 2 composants SHERWIN- WILLIAM Company, colour SABLE ref SW6083. http://www.sherwin-williams.com Or to renew the color polytrol at owatrol.com For the "black" lines I use a striper f

S/V A55#9 Seeking wiring diagrams for the double shunt and the 8 x AGM 160 V, 12 A batteries. Stuart Hemingway

The bottom of my keel is going to be sand blasted in a few day,I will immediately apply several coats of Petit Rustlok ,followed by several coats of barrier coat and then a couple of coats of bottom p

Dear all, I came across interesting messages on how to treat and repaint the bumper. I plan to do this in the near future but would like first to take it off. Could one of you advise on the steps to r

There is a piece of cable hanging from the top of the main mast mast. Any idea if Amels have been originally delivered with two antennas on the main mast? I have one on the main mast that is fine and

Good Day Amelians Recently, I was running system checks aboard s/v Spirit before a planned run from from Puerto Rico back up to Long Island NY. My gen set shut down upon starting and indicated an erro

We were cleaning our sea chest strainer for first time since getting the boat and it was pretty dirty but the upper lip on the strainer was also broken and taped back on by previous owner. I'm having

Hello Amelians, does anyone know the diameter for the signal lights of pressurized water and bilge pump on the 24V panel of the SM? Thanks for the help, I'm far away from the boat at the moment. -- Ar

Further to my note about converting from V belts to serpentine system on the Amel 54 and others. I went on the Optibelt site and had a good look at the rating tables and the engineering section. Very

We turned off the fresh water pump from the DC panel and let a tap run which lowered the water pressure to 0 before doing some plumbing work today. I expected that when I turned back on the fresh wate

Von meinem iPhone gesendet Anfang der weitergeleiteten Nachricht: Von: bijorka <bijorka@...> Datum: 11. September 2020 um 14:22:44 MESZ An: bijorka@... Betreff: Ankerwinde Amel euros  He Valentin , O

I am currently stuck in Thailand, and as many of you know Zivile and I have a YouTube channel about our circumnavigation. Sailing Aquarius. Over a Year ago I did a video about batteries, and the video

I spoke with my friend in Bogota and he would like to look at a defective board and give an estimate for its repair. Does anyone have a board that they would like me to send to him in Bogota for an es

Hello everyone, I'm ordering new gearboxes for the main furler and main outhaul. The units can be shipped with a bare alloy finish or with a 2 pot epoxy paint. I'm curious if anyone has advice one way

Hi fellow Amel owners. I have never been happy with the Leece-Neville 24v 175A alternator set up on Amelia presumably as supplied by Amel. Namely a double V belt pulley of 230mm diameter driving a 85m

Begin forwarded message: From: Barry Connor <connor_barry@...> Date: September 24, 2020 at 09:14:24 AST To: ngtnewington@... Subject: Re: Amel 54 alternator belts Hi again Nick, Just wanted to add. I

I need a little help with water maker usage and maintenance, please. Cream Puff has a 24v D60 water-maker. My problem is we seem to be going through membranes at the rate of a pair a year. I have read