Dear Amelians, thanks to Ken (SV Aquarius) and Oliver (SV Nautica) and others we know there are good (stand alone or B&G) solutions for a forward looking sonar. But do you know a possibility/ device w

I’m hoping to get a few tips on our water maker. We have a LaRochelle installed Dessalator, I believe a D60, SM 240, 24 volts only. We have used it only sporadically. I put new membranes in 2 years ag

I'm trying to find out who the owner of Triton is. the boats is here in Grenada. Where in the Same Marina and I have a few questions thanks.

I am investigating the possibility for using paddle speed transducer. There is Analog version of DST800 available. The specification are saying it is only for Raymarine ST60 but as I remember on my pr

Hi folks, Well, after several months of planning and discussions Robin and I have decided to offer Adagio for sale. I put a notice in the "For Sale" sub group and have cobbled together a web site for

To All I have a 1988 Mango lying in Westbrook, CT. I’m considering repainting my deck, photo attached. There are no discernible leaks associated with the cracks. What are my options for repainting the

Hello, Hope this finds everyone doing well. Having trouble finding a supplier with this part. This is for the portside large electric ST58 winch. Does anyone have one for sale or know of a supplier wi

Philippe Merci Andre

For the desk epoxy 2 composants SHERWIN- WILLIAM Company, colour SABLE ref SW6083. http://www.sherwin-williams.com Or to renew the color polytrol at owatrol.com For the "black" lines I use a striper f

S/V A55#9 Seeking wiring diagrams for the double shunt and the 8 x AGM 160 V, 12 A batteries. Stuart Hemingway

The bottom of my keel is going to be sand blasted in a few day,I will immediately apply several coats of Petit Rustlok ,followed by several coats of barrier coat and then a couple of coats of bottom p

Dear all, I came across interesting messages on how to treat and repaint the bumper. I plan to do this in the near future but would like first to take it off. Could one of you advise on the steps to r

There is a piece of cable hanging from the top of the main mast mast. Any idea if Amels have been originally delivered with two antennas on the main mast? I have one on the main mast that is fine and

Good Day Amelians Recently, I was running system checks aboard s/v Spirit before a planned run from from Puerto Rico back up to Long Island NY. My gen set shut down upon starting and indicated an erro

We were cleaning our sea chest strainer for first time since getting the boat and it was pretty dirty but the upper lip on the strainer was also broken and taped back on by previous owner. I'm having

Hello Amelians, does anyone know the diameter for the signal lights of pressurized water and bilge pump on the 24V panel of the SM? Thanks for the help, I'm far away from the boat at the moment. -- Ar

Further to my note about converting from V belts to serpentine system on the Amel 54 and others. I went on the Optibelt site and had a good look at the rating tables and the engineering section. Very

We turned off the fresh water pump from the DC panel and let a tap run which lowered the water pressure to 0 before doing some plumbing work today. I expected that when I turned back on the fresh wate

Von meinem iPhone gesendet Anfang der weitergeleiteten Nachricht: Von: bijorka <bijorka@...> Datum: 11. September 2020 um 14:22:44 MESZ An: bijorka@... Betreff: Ankerwinde Amel euros  He Valentin , O

I am currently stuck in Thailand, and as many of you know Zivile and I have a YouTube channel about our circumnavigation. Sailing Aquarius. Over a Year ago I did a video about batteries, and the video