|
How much Solar? 23 messages
I dont know if this has been addressed before but besides an answer of as much as possible, what are peoples experiences? My 55 currently has 750W (2 × 375w LG) on the davitts. I am debating bumping t
I dont know if this has been addressed before but besides an answer of as much as possible, what are peoples experiences? My 55 currently has 750W (2 × 375w LG) on the davitts. I am debating bumping t
|
By Billy Newport
·
|
|
Secondary Saltwater Manifold SMs & 54s, and possibly some Santorins, Mangos, and Maramus 44 messages
Most SM & 54 owners are aware that sooner or later they will need to replace the Secondary Saltwater Manifold which was made by Amel from copper pipe. Here is a view of the original SM Secondary Saltw
Most SM & 54 owners are aware that sooner or later they will need to replace the Secondary Saltwater Manifold which was made by Amel from copper pipe. Here is a view of the original SM Secondary Saltw
|
By CW Bill Rouse
·
|
|
I got tired of the rusty rudder quadrant 2 messages
I also had Amel make the stuffing box for the rudder deeper. It now takes 5 sections of packing---also my wrench is in the photo. Fair Winds Eric Kimberlite Amel Super Maramu #376
I also had Amel make the stuffing box for the rudder deeper. It now takes 5 sections of packing---also my wrench is in the photo. Fair Winds Eric Kimberlite Amel Super Maramu #376
|
By eric freedman
·
|
|
Yanmar no start. 16 messages
Hello Yanmar diesel gurus. Our Yanmar 4Jh3-HTE has never missed a beat, until today. Engine started fine and operated for 30-40 mins to lift anchor exit anchorage and get underway. Mostly at 1200-1500
Hello Yanmar diesel gurus. Our Yanmar 4Jh3-HTE has never missed a beat, until today. Engine started fine and operated for 30-40 mins to lift anchor exit anchorage and get underway. Mostly at 1200-1500
|
By Dan Carlson
·
|
|
Solid cockpit roof on Super Maramu 5 messages
As per request we have made a short film about our cockpit roof on our SuperMaramu S/Y Lady Annila. Please follow this URL https://www.dropbox.com/sh/i9dzki9zbz2s4mv/AAA1Nv70ovxLvpMuDCQHAUG1a?dl=0 Reg
As per request we have made a short film about our cockpit roof on our SuperMaramu S/Y Lady Annila. Please follow this URL https://www.dropbox.com/sh/i9dzki9zbz2s4mv/AAA1Nv70ovxLvpMuDCQHAUG1a?dl=0 Reg
|
By Ann-Sofie
·
|
|
Amel wanted 6 messages
We are looking to buy an A54 (or possibly a late model SM) in Europe. Please reach out if you are contemplating selling and we are not already in contact. Thanks.
We are looking to buy an A54 (or possibly a late model SM) in Europe. Please reach out if you are contemplating selling and we are not already in contact. Thanks.
|
By Julia Sloman
·
|
|
𝗖𝗹𝗶𝗺𝗺𝗮 𝗖𝗮𝗹𝗽𝗲𝗱𝗮 𝗣𝘂𝗺𝗽 𝗹𝗲𝗮𝗸𝗶𝗻𝗴 𝗺𝗲𝗰𝗵𝗮𝗻𝗶𝗰𝗮𝗹 𝘀𝗲𝗮𝗹 𝗰𝗮𝘂𝘀𝗶𝗻𝗴 𝗮 𝗴𝗿𝗼𝘂𝗻𝗱 𝗳𝗮𝘂𝗹𝘁
Peter, Here are a few more things that may help. Here are 4 pages out of the newest version of the Amel Book Calpeda Pump Mechanical Seal Replacemnt and Pum... Here is a Video for Disassembly of the m
Peter, Here are a few more things that may help. Here are 4 pages out of the newest version of the Amel Book Calpeda Pump Mechanical Seal Replacemnt and Pum... Here is a Video for Disassembly of the m
|
By CW Bill Rouse
·
|
|
ONAN replacement or not? 28 messages
Dear Amelians, my MDKAW is on ca 8000 hrs and I'm thinking about a replacement before sailing to the Pacific. The new 9 kW model (Marine QD space safer) MDKDL was offered to me for USD 12'195 - no dis
Dear Amelians, my MDKAW is on ca 8000 hrs and I'm thinking about a replacement before sailing to the Pacific. The new 9 kW model (Marine QD space safer) MDKDL was offered to me for USD 12'195 - no dis
|
By Alexander Ramseyer
·
|
|
Scuba Compressor storage on a MANGO
Hello all. I am getting ready to order a SCUBA compressor - Coltri MCH6 (110 volt electric). My boat its the Amel Mango. Do any of my fellow Mango owners have a dive compressor on their vessel? If so
Hello all. I am getting ready to order a SCUBA compressor - Coltri MCH6 (110 volt electric). My boat its the Amel Mango. Do any of my fellow Mango owners have a dive compressor on their vessel? If so
|
By Arlo
·
|
|
Water coming in at portside from a previous wrong repair 4 messages
Hello all. A few yeras back, while in the marina a strong storm caused a collision of my SM with the boat moored to our portside. It was repaired but since then we have noticed water in the kitchen, r
Hello all. A few yeras back, while in the marina a strong storm caused a collision of my SM with the boat moored to our portside. It was repaired but since then we have noticed water in the kitchen, r
|
By VICTOR MOLERO
·
|
|
Cracked Forestay Chainplate 5 messages
We recently cross the Atlantic in Saol Nua, a 1986 Mango. Just before sitting down to breakfast to mark our halfway point we spotted a very significant break in our forestay chainplate. With 1200nm to
We recently cross the Atlantic in Saol Nua, a 1986 Mango. Just before sitting down to breakfast to mark our halfway point we spotted a very significant break in our forestay chainplate. With 1200nm to
|
By Ellen Cahill
·
|
|
Onan ballbearing check and valves values 11 messages
Hello, 1. My ONAN manual indicates that the ballbearings need to be checked for their tollerance. In regular maintenance schedule. Does anybody hold an instruction how to do that? 2. What are the valv
Hello, 1. My ONAN manual indicates that the ballbearings need to be checked for their tollerance. In regular maintenance schedule. Does anybody hold an instruction how to do that? 2. What are the valv
|
By Oliver Henrichsen, SV Vela Nautica
·
|
|
Amel 55 Fwd shower valve leaking
I noticed yesterday that the fwd shower is dripping when turned off. It looks like a Paffoni brand shower mixer, the other taps in the bathrooms are similar brand. Is there a rebuild kit for these? Ne
I noticed yesterday that the fwd shower is dripping when turned off. It looks like a Paffoni brand shower mixer, the other taps in the bathrooms are similar brand. Is there a rebuild kit for these? Ne
|
By Billy Newport
·
|
|
A/C Heating unit thermal cut out 5 messages
Hi All, Can anyone give me the specification for the thermal cut off (thermistor) on the climma ac unit. Our heater is not working and I have ascertained it is the thermal cut off which is faulty, I n
Hi All, Can anyone give me the specification for the thermal cut off (thermistor) on the climma ac unit. Our heater is not working and I have ascertained it is the thermal cut off which is faulty, I n
|
By Steve Bell
·
|
|
ACMO Rigging 11 messages
In December 2019 we had our standing rigging replaced by Seanergie in Hyeres. They used ACMO rigging and WDS wire. -- Mark & Nicky Barter S/V Nunky SM 110
In December 2019 we had our standing rigging replaced by Seanergie in Hyeres. They used ACMO rigging and WDS wire. -- Mark & Nicky Barter S/V Nunky SM 110
|
By Mark Barter
·
|
|
Updated Event: ZOOM - Jimmy Cornell - Pacific Voyage Planning - Confirmed - Saturday, 13 February 2021 2 messages
#cal-invite
ZOOM - Jimmy Cornell - Pacific Voyage Planning - Confirmed When: Saturday, 13 February 2021 20:00 to 21:00 (UTC+00:00) UTC Organizer: Bill Rouse BROUSE@... 4093563221 An RSVP is requested. Click here
ZOOM - Jimmy Cornell - Pacific Voyage Planning - Confirmed When: Saturday, 13 February 2021 20:00 to 21:00 (UTC+00:00) UTC Organizer: Bill Rouse BROUSE@... 4093563221 An RSVP is requested. Click here
|
By
main@AmelYachtOwners.groups.io Calendar
·
|
|
Photo New Stainless Steel Turnbuckle with Bronze.JPG uploaded
#photo-notice
The following photos have been uploaded to the Amel SM - Standing Rigging album of the main@AmelYachtOwners.groups.io group. New Stainless Steel Turnbuckle with Bronze.JPG By: CW Bill Rouse
The following photos have been uploaded to the Amel SM - Standing Rigging album of the main@AmelYachtOwners.groups.io group. New Stainless Steel Turnbuckle with Bronze.JPG By: CW Bill Rouse
|
By
main@AmelYachtOwners.groups.io Notification
·
|
|
locked
Rigging 3 messages
Mark Barter's "edited" post about his recently purchased ACMO rigging originally noted Cheers, Craig -- SN68 Sangaris, Tropic Isle Harbor, FL
Mark Barter's "edited" post about his recently purchased ACMO rigging originally noted Cheers, Craig -- SN68 Sangaris, Tropic Isle Harbor, FL
|
By Craig Briggs
·
|
|
The maintenance fuel bladders 5 messages
Many/most of us have a COVID related "change of plans" story, but ours included 28 days nonstop Panama to Nuku Hiva, 8 days in Nuku, then 14 days Nuku to Hawaii. We had been Caribbean based our first
Many/most of us have a COVID related "change of plans" story, but ours included 28 days nonstop Panama to Nuku Hiva, 8 days in Nuku, then 14 days Nuku to Hawaii. We had been Caribbean based our first
|
By Thomas Kleman
·
|
|
Machine shop in Tahiti 3 messages
Hello Everybody, Can anyone recommend a good machine shop in Pape'ete for rebuilding the outhaul gearbox? Has anyone had this done in Tahiti before? The bronze worm gear has likely been sheared by the
Hello Everybody, Can anyone recommend a good machine shop in Pape'ete for rebuilding the outhaul gearbox? Has anyone had this done in Tahiti before? The bronze worm gear has likely been sheared by the
|
By Mike Longcor (SV Trilogy)
·
|