My top furling device for the genoa is turning very very badly. I need help to get it going or to dismantle it. I have already taken away the brown tigthening ring and now I can see a white plastic be

Zoom meeting - QSails owner/manager will present sails for Amels When: Saturday, 12 September 2020 20:00 to 21:00 (GMT+00:00) UTC Description: Time will be 2000 UTC. Over 60 Amel owners have purchased

Hi! Bill Kinney & I have been doing some work with new owners of an Amel 54. The outhaul is really stuck. Is there anyone in the group near Annapolis with a pulled for the outhaul that we could borrow

Reminder: Zoom meeting - QSails owner/manager will present sails for Amels When: Saturday, 12 September 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to RSVP Description: Time

I have been asked for the gearbox ratio of the gearbox and I am away from the boat. The boat is a 1993 Super Maramu hull number 110. It is a Hurth gearbox. The engine is a Perkins M80T Can anyone help

hello all, I plan to install a SCUBA compressor to fill the tanks and it will run using my 5.5 kw genset. Looking for recommendations on makes and model from those that have them onboard.

Hi all, We recently end-to-ended our anchor chain and I found the pictured device useful to guide the chain nice and flat at the bottom of the chain locker. It’s simply a piece of PVC pipe with a coup

Hi everyone, It's time to replace the good old anchor winch on our Euros 41. The thing is, per the original Amel design, the chain is not self-tailing as it is I believe on most Amels. We would like t

We would love to connect with others that have the same boat as us.

I have build up in the hose inside the holding tank. To me it looks as magic, how did the mount that one? Is it possible to replace? How? Paul on sykerpa SM 259, Lagos Portugal

Reminder: Zoom meeting - QSails owner/manager will present sails for Amels When: Saturday, 12 September 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to RSVP Description: Time

Hi all, since yesterday I have an oil pressure problem on my AMEL 54#96. When I go from normal speed to idle, the oil alarm starts. Of course, this doesn´t happen in the port but between the islands i

I learned something today with from a great 54 owner, from Dessalator, and from reading the recent specifications sheet for Filmtec SW30 membranes. · The actual pressure for the Green Zone on a Dessal

Dear all, hope everyone did have a great Chrismas and will have a good start into 2020. We are starting to prepare our Sharki for the long passage from Europe to the Caribbean. Up to now we have saile

Thanks to everyone who gave us information! I thought I would update on what we did to solve the problem of the seal. In the end we managed to solve the problem of the leaking oil, but it looks as if

Hello! Has your autopilot's electric motor failed? If you have heard of people's motors failing, I'll buy a new one on the spot, but I've only ever heard of clutch, belt, and bearing failures. My auto

Reminder: Zoom meeting - QSails owner/manager will present sails for Amels When: Saturday, 12 September 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to RSVP Description: Time

Mark, I for one agree , I wish I did not have a turbo, just another complexity , that is really not necessary . You brought up one other issue that I am dealing with , engine temperature . I had a new

The time has come to finalize the group purchase of the white rub rail inserts. Presently we have nine owners that are purchasing new inserts. Based on that number their cost should be, based on two 5

On Fri, Sep 4, 2020 at 01:03 PM, Symphony wrote: Icerette from Raritan