|
eRe: sm 53 vs 54 3 messages
My wife and I were faced with a fairly similar decision when we were weighing the money vs. size vs. age vs. condition of a Maramu and a Mango and a Super Maramu. Between the three there was over $100
My wife and I were faced with a fairly similar decision when we were weighing the money vs. size vs. age vs. condition of a Maramu and a Mango and a Super Maramu. Between the three there was over $100
|
By Gary Wells
·
|
|
Switch on Bilge Float Tube 9 messages
When cleaning our bilge, we noticed the cap had come off of this (see pictures). It is attached to the tube that houses the bilge float and appears to be a switch. But I am not really sure what this i
When cleaning our bilge, we noticed the cap had come off of this (see pictures). It is attached to the tube that houses the bilge float and appears to be a switch. But I am not really sure what this i
|
By Ian Townsend
·
|
|
Isolated ground solenoid 10 messages
So, engine doesn't start intermittently. After corrosion x in the solenoid, cleaning contacts, problem re-emerges. Can start engine by pushing button but need to fix this. Broke out spares purchased a
So, engine doesn't start intermittently. After corrosion x in the solenoid, cleaning contacts, problem re-emerges. Can start engine by pushing button but need to fix this. Broke out spares purchased a
|
By Thomas Kleman
·
|
|
File /CockpitEnclosure.pdf uploaded 9 messages
#file-notice
The following files have been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. /CockpitEnclosure.pdf By: Gerhard Mueller Description: Cockpit Enclosure for Sharki
The following files have been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. /CockpitEnclosure.pdf By: Gerhard Mueller Description: Cockpit Enclosure for Sharki
|
By
main@AmelYachtOwners.groups.io Notification
·
|
|
NMEA 2000 Updating software
I have just installed a new chartplotter with prexisting NMEA 2000/ Seatalkng components and spent significant time sorting out a problem with as it turned out a simple solution. The solution to compo
I have just installed a new chartplotter with prexisting NMEA 2000/ Seatalkng components and spent significant time sorting out a problem with as it turned out a simple solution. The solution to compo
|
By Adam Body
·
|
|
Upcoming Event: ZOOM Meeting, Presentation from the owner of QSails on sailcloth and sail construction - Sat, 07/11/2020 20:00-21:00, Please RSVP
#cal-reminder
Reminder: ZOOM Meeting, Presentation from the owner of QSails on sailcloth and sail construction When: Saturday, 11 July 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to RSVP
Reminder: ZOOM Meeting, Presentation from the owner of QSails on sailcloth and sail construction When: Saturday, 11 July 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to RSVP
|
By
main@AmelYachtOwners.groups.io Calendar
·
|
|
crappy job ahead of me....... santorin waste pipe 4 messages
well i have some crappy news...turns out my holding tank pipe is leaking. It is not the hose clamps. What are my options here...this is a santorin. Removal of the wall is pretty straight fwd i believe
well i have some crappy news...turns out my holding tank pipe is leaking. It is not the hose clamps. What are my options here...this is a santorin. Removal of the wall is pretty straight fwd i believe
|
By Eric Meury
·
|
|
Skarki Headspace / Celing Height 8 messages
Hello, as a potential owner of a Sharki from 1982 I am interested in knowing: 1. salon headspace (ceiling height) 2. dimension of mattress (sleeping surface) in rear cabin when maximized. Cannot find
Hello, as a potential owner of a Sharki from 1982 I am interested in knowing: 1. salon headspace (ceiling height) 2. dimension of mattress (sleeping surface) in rear cabin when maximized. Cannot find
|
By MATTHIAS GRAWE
·
|
|
problems installing a new Yanmar engine 11 messages
#replacement
Amel owners who did an engine replacement, please help! We are replacing the old Volvo penta engine with the new Yanmar engine. we have problem - vibration. Did you have such a problem? Do you know ho
Amel owners who did an engine replacement, please help! We are replacing the old Volvo penta engine with the new Yanmar engine. we have problem - vibration. Did you have such a problem? Do you know ho
|
By Ira and Roman Morozov
·
|
|
Dessalator Duo watermakers - energy saving tip: don't use 230v if you can avoid it 8 messages
We have a Desslator Duo 100 that runs on either 24v DC or 230v AC. According to the specs and our own measurements, the 24v motor draws 600watts and the 230v motor draws 1100watts! The AC motor draws
We have a Desslator Duo 100 that runs on either 24v DC or 230v AC. According to the specs and our own measurements, the 24v motor draws 600watts and the 230v motor draws 1100watts! The AC motor draws
|
By Scott SV Tengah
·
|
|
Maramu Furling Mainsail - NEW for sale.
Furling Mainsail in HydraNet. New. Located in the US. see https://amelyachtowners.groups.io/g/ShareParts/topic/maramu_furling_mainsail_never/75216717?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,75
Furling Mainsail in HydraNet. New. Located in the US. see https://amelyachtowners.groups.io/g/ShareParts/topic/maramu_furling_mainsail_never/75216717?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,75
|
By CW Bill Rouse
·
|
|
Installation of Electric oven with induction cooktop 20 messages
The electric consumption on our Amel 54 is getting high as we are now full time on our boat. We are ready to change to Lithium and also change from LP gas. Planning to install a 5000w 230v charger/inv
The electric consumption on our Amel 54 is getting high as we are now full time on our boat. We are ready to change to Lithium and also change from LP gas. Planning to install a 5000w 230v charger/inv
|
By Barry Connor
·
|
|
Slide Hammer Anybody think the 5lb slide hammer is overkill for working on Kristy?
Hi Brent, thanks for the input. That is a lot of tool. You tackle a lot bigger jobs than I'm likely to do! Years ago I launched my lake boat without the plug, and had to jump overboard with a sock to
Hi Brent, thanks for the input. That is a lot of tool. You tackle a lot bigger jobs than I'm likely to do! Years ago I launched my lake boat without the plug, and had to jump overboard with a sock to
|
By karkauai
·
|
|
Updated Event: ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries - Saturday, 8 August 2020
#cal-invite
ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries When: Saturday, 8 August 2020 20:00 to 21:00 (UTC+00:00) UTC An RSVP is requested. Click here to RSVP Description: If you are interested in Lith
ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries When: Saturday, 8 August 2020 20:00 to 21:00 (UTC+00:00) UTC An RSVP is requested. Click here to RSVP Description: If you are interested in Lith
|
By
main@AmelYachtOwners.groups.io Calendar
·
|
|
A54 fridge circulation pump 83 messages
Hello We have flojet 32601 -0092 Quad series pump r4105512a. ( 12v, 1.5 A max, 1.6 gpm 6.1 lpm, 50 psi 3.4 max) installed onboard as circulation pump for fridges/freezer. They are relatively easy to s
Hello We have flojet 32601 -0092 Quad series pump r4105512a. ( 12v, 1.5 A max, 1.6 gpm 6.1 lpm, 50 psi 3.4 max) installed onboard as circulation pump for fridges/freezer. They are relatively easy to s
|
By Sv Garulfo
·
|
|
A good laugh at my expense 3 messages
When in an area with low or almost no bars on the cell phone (we use for data), I’ll often put the phone up the mizzen mast to improve the line-of-sight to the cell tower. On this occasion, I mistied
When in an area with low or almost no bars on the cell phone (we use for data), I’ll often put the phone up the mizzen mast to improve the line-of-sight to the cell tower. On this occasion, I mistied
|
By Mark Erdos
·
|
|
anyone selling and or have b&g equipment laying around 2 messages
anyone have their old bg instruments and depth sounder etc laying around that they have yet to sell. I am intereted.
anyone have their old bg instruments and depth sounder etc laying around that they have yet to sell. I am intereted.
|
By Eric Meury
·
|
|
Slide Hammer 2 messages
Hi all, I've seen a few posts where people talk about using a slide hammer. I've never used one, but I run across projects regularly where I think one would be useful. Can anyone guide me in choosing
Hi all, I've seen a few posts where people talk about using a slide hammer. I've never used one, but I run across projects regularly where I think one would be useful. Can anyone guide me in choosing
|
By karkauai
·
|
|
Iridium GO! and the iPhone 11 4 messages
#order
I inherited an Iridium GO! when I purchased my SM2 last year and am just now beginning to use it. Thanks to PredictWind’s tech support in New Zealand I can get the system up and running with my iPad.
I inherited an Iridium GO! when I purchased my SM2 last year and am just now beginning to use it. Thanks to PredictWind’s tech support in New Zealand I can get the system up and running with my iPad.
|
By David Kurtz
·
|
|
Onan muffler reducer
On SM2K 422, the Onan MDKAV uses a Vetus Waterlock LP50. The exhaust line into the muffler is thus 50 mm. The muffler outlet has a 50 to 40 mm reducer which connects to the genset exhaust hose. In buy
On SM2K 422, the Onan MDKAV uses a Vetus Waterlock LP50. The exhaust line into the muffler is thus 50 mm. The muffler outlet has a 50 to 40 mm reducer which connects to the genset exhaust hose. In buy
|
By Thomas Kleman
·
|