Eric on Kimberlite is currently in Sint Maarten and will sail back to the US in 5 or 6 weeks. If anyone is interested by some of the parts I have left, this would be a good opportunity to save on ship

This is a new thread to continue the overly long thread at: https://amelyachtowners.groups.io/g/main/topic/a54_fridge_circulation_pump/34255404?p=Created,,,20,1,60,0::recentpostdate%2Fsticky,,,20,2,0,

Sorry to add some more about batteries. Previous owner replaced batteries 10 years ago with Victron AGM . So far I did not have any problems but I know from my previous boat that they much overdue for

I found this wooden part in front and aft head. Any idea what is this for and where it is mounted. Sorry I feel stupid but can not figure out where to use it. Thank you. -- Slavko SM 2000 #279

Sorry to go on about batteries…… I have 8 Lifeline AGM batteries set up as four pairs of 24v. So the four pairs are in parallel. I set them up as I found the original and as Amel must have set them up

hallo everybody, I’ve found this part broken. My lady had 2 at the end of mizzen boma to change. Any idea about the original manufacture brand or any option to install not changing the 3 holes Stay he

Hello, as I can not go to the boat in next weeks (corona lockdown in Slovenia) I would like to ask if anyone have the dimension of GPS Valsat03 that I will replace with chartplotter. Thank you. -- Sla

I have had difficulty scheduling someone to speak at our Zoom meetings for November and December. Hopefully, we will be able to resume these meetings next year. I am always open to suggestions. Bill C

I recently replaced my high pressure switch. It was leaking profusely and corroded. It wasn't working. The desal unit will work fine without the switch in the system. It is there to prevent over-press

Hello! Plan a trip to Nordkapp next season and need to install a diesel heater in our SM (we do not have the forced ventilation). I have searched on the forum but did not find the information I was lo

SM owners, As many of you know there have been some issues with the Main Boom Aluminum Slider Mounts cracking and failing. Mat Day, the new owner of SM 209 ADAGIO has a great solution that you might w

Hi all, We just completed a 2900nm passage from Hawaii to French Polynesia with pretty rough upwind/up current conditions for the first 10 days or so. Just a bit longer than the Atlantic crossing but

Good morning, I contacted Maude looking for a replacement deck cap fitting for my head pump out tank but was informed Amel does not carry that part anymore. Has anyone sourced this part elsewhere? Kev

One of the bolts on my main switch broke off. Anyone know if they still exist or do I need to replace it with another model? Paul on sykerpa SM 259 Lagos Portugal

Good morning all, On sv BeBe, SM#387, I have the original Dessalator 230v 160LPH water-maker. Today was the first time I this season that I have tried to run the water maker (as we were in the muddy C

In need of a Lewmar Medium Profile Hatch gasket size 50 - found a deal that may include free freight and a 10% discount. Hurry before they are gone! -- Mark Mueller Brass Ring A54

I have spent the last couple of days trying to debug the side-power bow thruster on my boat, and the up/down 4 relay system. My motor for up/down had a bad bearing and was blowing a fuse. It appears t

Hello Dan; We have the same water maker aboard Kokomo. However, I’m not sure if it is the same or a later design. Going through your procedure, I have one recommendation. I see that you state that you

Hi does anyone have the dimensions of the board you use to secure the hatch on a 54? Mine has become warped and I need to make a new one but am not on the boat. Cheers Courtney 54 #101 Trippin Brunswi

Would anyone be able to recommend a surveyor in the Charleston area please? Ideally one with Amel experience. thanks