We turned off the fresh water pump from the DC panel and let a tap run which lowered the water pressure to 0 before doing some plumbing work today. I expected that when I turned back on the fresh wate

Von meinem iPhone gesendet Anfang der weitergeleiteten Nachricht: Von: bijorka <bijorka@...> Datum: 11. September 2020 um 14:22:44 MESZ An: bijorka@... Betreff: Ankerwinde Amel euros  He Valentin , O

I am currently stuck in Thailand, and as many of you know Zivile and I have a YouTube channel about our circumnavigation. Sailing Aquarius. Over a Year ago I did a video about batteries, and the video

I spoke with my friend in Bogota and he would like to look at a defective board and give an estimate for its repair. Does anyone have a board that they would like me to send to him in Bogota for an es

Hello everyone, I'm ordering new gearboxes for the main furler and main outhaul. The units can be shipped with a bare alloy finish or with a 2 pot epoxy paint. I'm curious if anyone has advice one way

Hi fellow Amel owners. I have never been happy with the Leece-Neville 24v 175A alternator set up on Amelia presumably as supplied by Amel. Namely a double V belt pulley of 230mm diameter driving a 85m

Begin forwarded message: From: Barry Connor <connor_barry@...> Date: September 24, 2020 at 09:14:24 AST To: ngtnewington@... Subject: Re: Amel 54 alternator belts Hi again Nick, Just wanted to add. I

I need a little help with water maker usage and maintenance, please. Cream Puff has a 24v D60 water-maker. My problem is we seem to be going through membranes at the rate of a pair a year. I have read

My wife and I are former SM owners who miss the life and our Amel. We have been shopping for 50 foot plus boat for several months and nothing comes close to our Amel. We're interested in late model SM

The following files have been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. /EX_MARINA.pdf By: Mark McGovern Description: AMFA Marina Electric Sump Pump Exploded Assembly Dra

This is my 6 yr old turbo from Volvo tamd22 after being cleaned. I have a loss of rpm only able to get 2200. Is this rust color normal? I'm wondering about all the pitting. I have a new turbo on order

Hi I am looking for a good technician in Rhodos. Can someone maybe recommend me a technician in Rhodos that has experience with Amel? Thanks a lot in advance for your feedback. Lior Sharona A54 #18

Hi all SM owners, Our swim ladder is just that, we have the wheels and the deck step end but none of the parts to make it into a usable pasarelle. Does anyone have the specifications for the original

About 7:12 https://www.youtube.com/watch?v=46rg0hqwgu4&t=75s

Hi All I'm just about to replace my forestay and need to 'drop' the Genoa furler. Can someone please offer me advice on how to do it? Regards Rob SY FORESIGHT SM #152

Hello, I am getting used to my new boat. I need some help with model of the anchor washing pump that is not working at all. I made some photos but didinot check at the time how clear the photos are. N

Recently, as we have been using the manual bilge pump quite a lot due to a problem on the AMFA electric pump, I noticed a leak on that pump, and getting worse. Grey water coming from the ceiling of th

I recently serviced both main furling and outhaul gears and motors. I found the aluminium shaft on the furling motor very difficult to remove. It was soaked 48 hours in diesel and then pressed out wit

Could someone please tell me the external diameter of the copper fuel line. It will obviously be the same as the ID of the fuel hoses. I just can't remember it. Many thanks -- Mark & Nicky Barter S/V

Stefania Dente