Hello, Amel are currently unable to provide the strut from their usual supplier. I managed to get the following reference after removing the strut. 14320310-300N. Unfortunately no brand referenced. An

Hello guys, I have a problem that maybe some of you have already had, and can help me. When using the kitchen faucet, my wife complained that the water was too hot, even in the position that she alway

Reminder: ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries When: Saturday, 8 August 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to RSVP Description: If you are intere

Zoom meeting - QSails owner/manager will present sails for Amels When: Saturday, 12 September 2020 An RSVP is requested. Click here to RSVP Description: Time will be 2000 UTC. Over 60 Amel owners have

Reminder: NEW: s/v DELOS, Brian id also joining. DELOS installed these. European distributor of LiFePO4 Lithium and Victron Energy joining ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries When:

There is black grease leaking from the the mechanism that you put the winch handle into to furl the main sail in or out when the gearbox and motor are disconnected. If I disassemble the unit by removi

I recently bought a Maramu hull #188. The previous owner used windlass motors as replacements for the furling on the main. They seem to be corroding quickly since they were not built to be exposed to

I’m going to watch on YT, do I need to RSVP? Regards, Robert Giroux (202)262-5828 -----Original Appointment----- From: main@AmelYachtOwners.groups.io Group <main@AmelYachtOwners.groups.io> Sent: Satur

NEW: s/v DELOS, Brian id also joining. DELOS installed these. European distributor of LiFePO4 Lithium and Victron Energy joining ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries When: Saturday,

Hello friends I managed to pick up a pair of new Goiot mainsheet cars when we were in Martenique last year So I have some new shiny ones that I’m rather pleased with. (Still hunting mizzen cars but th

As I am working on the boat, I also want to replace the bilge switch (corrosion / got an new one from Amel). I wanted to remove the back cap on top of the stick to mount the new string, but it looks l

Hallo, A question out of curiosity. We are planning to redo our interior textiles and are wondering if the design as shown is the original for a SM or SM2K, see photo attached. Best regards Alexander

NEW: European distributor of LiFePO4 Lithium and Victron Energy joining ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries When: Saturday, 8 August 2020 20:00 to 21:00 (UTC+00:00) UTC An RSVP is

Hi, Can folks please link me to any resources in terms of actually attaching the passerelle to the stern? I've found a couple of photos, but mostly in the photos it seems as though folks are just tyin

Dear Forum, At cost of postage I have some original wall lights for most of the Amel 54's at offer. I replaced all of my lights as several of them were getting pretty ugly. I still have 6 in good shap

Hello Amel 55 owners! I had a great chat with Jose Alegria who was nice enough to give me feedback on his 55. I am actively looking at several 55s in different parts of the world (travel is a challeng

I just uploaded the workshop manual for the engine transmission into the "/Files / Volvo Penta" section. I don't think there is a lot we can do about this thing ourselves as it needs lots of specialty

Reminder: YouTube link set up for the live stream included below ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries When: Saturday, 8 August 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is reque

Hello, thanks for help with my hatches. Are there any drawings for the C drive, and propulsion, with spare parts available? Were to buy the spare parts? Is there an Amel shop? mit feundlichem Gruß / b