I'm in the process of replacing the shaft bushing on my SM. How do you make sure the drain plug with the large slot for the line cutter is allaigned and firmly tighten at the same time? I was thinking

I've been running my boat in the marina this winter with the diesel heater running. It was down at a quarter in late Dec so I filled it with 103 gallons. I had fuel coming up the fill pipe in to the o

I was looking for new membranes for my watermaker and found this company. I needed SW30-2540 not only are they huge they were the least expensive by quite a bit. https://www.evoquaadvantage.com/produc

To all owners of a 54, did anyone try to fit a 54 with a vindvane? I do not rmember clearly but I think I have seen pics of an 54 steered by a vindvane. Thanks Martin Mago del Sur - 54#40

Hey, The sliding hatch of the companionway of our SM2K is rather difficult to move, does anybody know what to do to make it slide again smoothly? Eloi SM2K 426 Canet en Roussillon

Dear Forum, In my never ending attempts to keep the boat organized I encountered the following parts that seem to be useful on a A54 but I don’t know for what. Can someone enlighten me? Thanks in adva

Finally! An OM turbo for Yanmar. Savings of more than $700. https://www.ebay.com/itm/353395787363?ul_noapp=true With best regards, Mark Skipper Sailing Vessel - Cream Puff - SM2K - #275 Currently crui

If you have a 4jh Yanmar engine and your instrument panel does not have a light to indicate you have water in the filter you can eliminate the expensive filter, wiring, and sensor. The only purpose of

Hi, does anyone know what this unit is for?

The Amel Yard seems to run a Forum/ Amel Club (http://www.club-amel.fr/home-community/). Does anybody know if that forum/club is still maintained? It takes forever to load (I am in San Francisco, so I

After a lengthy trial, I have closed the Commerical Sub-Group. About 95% of the activity was at least 1 SPAM message a day, which I had to filter and manually delete. We tried, but it was much more tr

Dear Ameliens, friends of the oceans, wherever you are, I hope you are in good health! On our 54 "Soleil Bleu" the rubber sleeves at the bottom of the joysticks for the bow thruster and port side anch

I was wondering if anyone has changed their Yanmar 4jh3hte engine to a 4jh4hte Yanmar Besides Kent. Fair Winds Eric Kimberlite Amel Super Maramu #376

I'm serviceing/ repairing my bowrhruster. Remember a post a few years ago some one used grease instead of oil. Anyone have any experience using grease instead of oil? pros and cons? I notice that oil

All, The "Amel Owners Insurance Team" consisting of Teun BAAS, Kent Robertson, Ken Powers, Brent Cameron, David Kurtz, David Vogel, and JB Duler have been "working to come up with a Group Insurance Of

https://www.reuters.com/article/us-apple-autos-exclusive/exclusive-apple-targets-car-production-by-2024-and-eyes-next-level-battery-technology-sources-idUSKBN28V2PY -- John Bernard "JB" Duler San Fran

Hello, I am in a process of replacing my anchor and strongly consider ULTRA (45 or 35). I like to ask if anybody had already experience with ULTRA and how does it fit to the standard AMEL SM bow rolle

Hello group and apologies for such a very specific question. This is regarding the ‘stop charging’ cutoff for the 24V Mastervolt alternator with respect to a Lithium house bank. I have reviewed everyt

Hello everybody! Does anyone here know the history, owners (also former ones), technical condition or pretty much anything relevant about Amel Santorin „OYANA” (N 89)? Thanks in advance for your help!

On my Maramu 86, I have about 80-100 liters left of water and no water seems to be coming out of the automatic water pump but the manual one is still working. Is it possible the automatic water pump d