|
Bow Thruster Amps rating. 13 messages
Hi- maybe someone can help me understand... The Super Maramu 2k Manual shows that the bow thruster draws 7000W and 510A at 24V. Is this correct? If so, how does the math work out? W=VxA is violated AN
Hi- maybe someone can help me understand... The Super Maramu 2k Manual shows that the bow thruster draws 7000W and 510A at 24V. Is this correct? If so, how does the math work out? W=VxA is violated AN
|
By Chris Doucette
·
|
|
.Re: LiFePO4 Conversion on sv BeBe - SM#387 3 messages
Maybe I missed it but does the ability to put 12 lithiums in our SM Redline models solve the high amp problem?? In theory the 4 extra 31 series provide 50% more amp capacity. Somewhat related. On our
Maybe I missed it but does the ability to put 12 lithiums in our SM Redline models solve the high amp problem?? In theory the 4 extra 31 series provide 50% more amp capacity. Somewhat related. On our
|
By rossirossix4
·
|
|
Genoa Chain Plate bolts Leaking in aft hanging closet 28 messages
Hello Amelians, Aquarius has sprung a leak in the aft closet. I have traced it back to one of the 4 bolts holding the Genoa chainplate in place. Has anyone else had this problem, and are there any sec
Hello Amelians, Aquarius has sprung a leak in the aft closet. I have traced it back to one of the 4 bolts holding the Genoa chainplate in place. Has anyone else had this problem, and are there any sec
|
By Ken Powers SV Aquarius
·
|
|
Main Furler - Sail stuck / jammed 15 messages
Hi Group, When left the electrician for few mins to go through the main control panel (above the steering) in order to reinforce, clean up and do the contacts - he was playing too much with the main f
Hi Group, When left the electrician for few mins to go through the main control panel (above the steering) in order to reinforce, clean up and do the contacts - he was playing too much with the main f
|
By Santorin LO
·
|
|
A question about coppercoat 20 messages
Hi all, With Coppercoat, my understanding is that scraping should be done 2-4 times a year depending on where you are. My question is: does it matter of the hull is not scraped for an extended period,
Hi all, With Coppercoat, my understanding is that scraping should be done 2-4 times a year depending on where you are. My question is: does it matter of the hull is not scraped for an extended period,
|
By Paul Dowd and Sharon Brown
·
|
|
Differences between Super Maramu (SM) and Super Maramu 2000 (SM2000; SM2k) 6 messages
I have searched the group but can not find anything that lists what are the main differences between the early SM and the SM 2000 - could somebody please point me to the post if they know it or list t
I have searched the group but can not find anything that lists what are the main differences between the early SM and the SM 2000 - could somebody please point me to the post if they know it or list t
|
By jimbo ken
·
|
|
winterizing the watermaker 9 messages
Hi all, We have the 60L/hr, 24V-only Dessalator. Following the great instructions from past threads on this subject, we've successfully winterized the raw water side with pink antifreeze. But none of
Hi all, We have the 60L/hr, 24V-only Dessalator. Following the great instructions from past threads on this subject, we've successfully winterized the raw water side with pink antifreeze. But none of
|
By Ryan Meador
·
|
|
Anchor guide measurement 3 messages
Hi Amelians, is someone able to give me the measurement of the anchor guide? I have attached the picture. Thank you so much for help, I am now far away and search a solution to build in a SS plate tha
Hi Amelians, is someone able to give me the measurement of the anchor guide? I have attached the picture. Thank you so much for help, I am now far away and search a solution to build in a SS plate tha
|
By Arnold Mente
·
|
|
Volvo 12v alternator 3 messages
Lost output from 12 V alternator. Doing initial trouble shooting trying to understand the function of the short yellow wire which arises from near the voltage regulator and is not connected to anythin
Lost output from 12 V alternator. Doing initial trouble shooting trying to understand the function of the short yellow wire which arises from near the voltage regulator and is not connected to anythin
|
By Mike Ondra
·
|
|
Credit when credit is due 6 messages
I cannot begin to tell all of you how impressed I am with Amel and particularly Thierry. They never fail to surprise me.. Last night Monday about 1-2 AM I wrote to Thierry at Amel with my tale of woe
I cannot begin to tell all of you how impressed I am with Amel and particularly Thierry. They never fail to surprise me.. Last night Monday about 1-2 AM I wrote to Thierry at Amel with my tale of woe
|
By eric freedman
·
|
|
Navpod at the helm installation
Hello all. I will be installing a Navpod at the helm in the next week and aside from clearance on my traveler (far left of photo) and trying to preserve visibility to 3 or 4 of my raymarine instrument
Hello all. I will be installing a Navpod at the helm in the next week and aside from clearance on my traveler (far left of photo) and trying to preserve visibility to 3 or 4 of my raymarine instrument
|
By Arlo
·
|
|
Amel parts 10 messages
Does anyone on the forum know whether Amel is open for business at the moment, or on summer holidays. I have emailed Maud at sav@... for availability for some parts and have had no response. Thanks, E
Does anyone on the forum know whether Amel is open for business at the moment, or on summer holidays. I have emailed Maud at sav@... for availability for some parts and have had no response. Thanks, E
|
By Elaine Leishman
·
|
|
Problem with bowthruster 9 messages
I recently rebuilt my bow thruster, . Upon leaving the dock today my bow thruster did not work and made a whirring noise. When I took it apart I saw that the gears were worn. My gears on my old bow th
I recently rebuilt my bow thruster, . Upon leaving the dock today my bow thruster did not work and made a whirring noise. When I took it apart I saw that the gears were worn. My gears on my old bow th
|
By eric freedman
·
|
|
24 v main switch 7 messages
I'm in the process to install LiFePO4 cells, I like to tidy up among some of the wiring, install some fuses etc. Now to my question. From the 24 V main switch there are 5 cables.one thick black cable
I'm in the process to install LiFePO4 cells, I like to tidy up among some of the wiring, install some fuses etc. Now to my question. From the 24 V main switch there are 5 cables.one thick black cable
|
By Paul Osterberg
·
|
|
Victron Quattro charger/inverter installation 29 messages
Hello Super Maramu or A-54 owners - (and particularly Scott Tengah) I am going to install a Victron 24V 5000W Quattro Charger/Inverter in my Super Maramu. As this has an internal automatic transfer sw
Hello Super Maramu or A-54 owners - (and particularly Scott Tengah) I am going to install a Victron 24V 5000W Quattro Charger/Inverter in my Super Maramu. As this has an internal automatic transfer sw
|
By James Cromie
·
|
|
LiFePO4 Conversion on sv BeBe - SM#387 17 messages
Here is a bit of summary of the LiFePO4 battery conversion that we have been through on BeBe over the last year. I’ll start off with a bit about ourselves as context for some of our decisions. Then de
Here is a bit of summary of the LiFePO4 battery conversion that we have been through on BeBe over the last year. I’ll start off with a bit about ourselves as context for some of our decisions. Then de
|
By Dan Carlson
·
|
|
Maramu #162 for sale 3 messages
Hello all Our wonderful Maramu is up for sale https://amelyachtowners.groups.io/g/yachtforsale/message/123 Ashore in Plymouth UK and ready to go anywhere All details available on request All the very
Hello all Our wonderful Maramu is up for sale https://amelyachtowners.groups.io/g/yachtforsale/message/123 Ashore in Plymouth UK and ready to go anywhere All details available on request All the very
|
By smiles bernard
·
|
|
Super Maramu Bimini 14 messages
Our bimini fabric is worn and needs replacement. This is cheaper than we could find locally. The quote from Amel is for 1 914,19 Euros plus shipping and taxes, with delivery in 6 to 8 weeks. I am cert
Our bimini fabric is worn and needs replacement. This is cheaper than we could find locally. The quote from Amel is for 1 914,19 Euros plus shipping and taxes, with delivery in 6 to 8 weeks. I am cert
|
By Karen Smith
·
|
|
Altinator change VP TMD 22 B
Hallo, everyone anybody have any experience with the change the altinator 24 V.60 AH on a bigger one mybe 110 AH and if so, which light machines were used? The engine is a Volvo Penta TMD 22 B 1998 Th
Hallo, everyone anybody have any experience with the change the altinator 24 V.60 AH on a bigger one mybe 110 AH and if so, which light machines were used? The engine is a Volvo Penta TMD 22 B 1998 Th
|
By Elja Röllinghoff Balu SM 222
·
|
|
C-Drive Oil drain - Alternative 18 messages
Dear AMEL Groupies Is there a way to dain (pump/sucking) out bad Oil from the C-Drive while the boat is in water? Recently (after 3 years) I got water ingress into the C-Drive. I cannot go out on hard
Dear AMEL Groupies Is there a way to dain (pump/sucking) out bad Oil from the C-Drive while the boat is in water? Recently (after 3 years) I got water ingress into the C-Drive. I cannot go out on hard
|
By Rudolf Waldispuehl
·
|