I have build up in the hose inside the holding tank. To me it looks as magic, how did the mount that one? Is it possible to replace? How? Paul on sykerpa SM 259, Lagos Portugal

Reminder: Zoom meeting - QSails owner/manager will present sails for Amels When: Saturday, 12 September 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to RSVP Description: Time

Hi all, since yesterday I have an oil pressure problem on my AMEL 54#96. When I go from normal speed to idle, the oil alarm starts. Of course, this doesn´t happen in the port but between the islands i

I learned something today with from a great 54 owner, from Dessalator, and from reading the recent specifications sheet for Filmtec SW30 membranes. · The actual pressure for the Green Zone on a Dessal

Dear all, hope everyone did have a great Chrismas and will have a good start into 2020. We are starting to prepare our Sharki for the long passage from Europe to the Caribbean. Up to now we have saile

Thanks to everyone who gave us information! I thought I would update on what we did to solve the problem of the seal. In the end we managed to solve the problem of the leaking oil, but it looks as if

Hello! Has your autopilot's electric motor failed? If you have heard of people's motors failing, I'll buy a new one on the spot, but I've only ever heard of clutch, belt, and bearing failures. My auto

Reminder: Zoom meeting - QSails owner/manager will present sails for Amels When: Saturday, 12 September 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to RSVP Description: Time

Mark, I for one agree , I wish I did not have a turbo, just another complexity , that is really not necessary . You brought up one other issue that I am dealing with , engine temperature . I had a new

The time has come to finalize the group purchase of the white rub rail inserts. Presently we have nine owners that are purchasing new inserts. Based on that number their cost should be, based on two 5

On Fri, Sep 4, 2020 at 01:03 PM, Symphony wrote: Icerette from Raritan

Hello everyone - I would like to ask if anyone can recommend a US source for a replacement plastic ballooner halyard hook (for hoisting). This would be for a Super Maramu 2000. Alternatively, I'll con

Hi Team, We have recently replaced our house batteries with 12 x Victron 110amp Gel batteries to give us 660amp capacity. We have Solar set up through a Victron MPPT with 3 x 200w panels We ultimately

Yesterday I discovered a pin hole in the intercooler. That is it was blowing out air from this tiny hole, to be clear the turbo blows hot compressed air through the intercooler to cool it on its way t

Hi guys random question but has anyone found an ice maker they really like and is reliable?Cheers Courtney Trippin 54 #101

Hi to all, thanks to Duane Siegfri photos it was possible to see how the foil is connected to the furling gear shaft. Well, I suppose that my steel upper bolt has enlarged a little bit the relative ho

I need to renew the bungee cord in the main boom on my A54. Can someone explain the technique please. The only opening which gives access to the bungee is at the leech end of the boom and that’s prett

I trying to remove the Turbo for maintenance or replacement, but can't get the high pressure tube to lose. The nut is copper, key number 10 is to small an key number 11 to large. Filed a key 10 to the

Good day all, We need to haul the RK in the near future for an insurance survey and while out we want to repaint the bottom. In case we need to re-epoxy the cast iron keel this time around, I want to

Amel expert and principal of Yacht School, Bill Rouse, was onboard in May 2019 and commented “Balthazar’s condition is in the top 10% of Amel 54’s that I have seen”. We have only owned Balthazar since