Hello fellow Amelians, Having an issue with the genset on SM2000. After no use for 3 months, it would crank but not start. After 8 sec preheat, pressing START, engine cranks fine, but no ignition. Vis

It s an oil leak from the bottom of the gear box. I found some informations how to fix it. But I can t take the gear box out of the mast... Help!!! Thank you all of you, Philippe

Hello all I have a question that i am struggling with and wondered if the amel hive mind could shed some light. I recently disconnected all batteries and solar I then reconnected and seem to have lost

Just changed bearings and cogwheels on my SM bow-thurster when at anchor. Made a video of the process. Might be of interest for others in need to repair. Do not claim this is the way to do it, just th

Dear Friends; I want to change my standing rigging of my SM#76. She about 28 years old and haven’t changed yet - unfortunately. Do you have any recommendations for me? Can you please share the parts l

I get the attraction of Cromox; No rust Stacks nicely, Clean the 10mm chain has a MBL of 10197 Kg, so strong too BUT one hundred meters would cost about £6115 (Jimmy Greene) including VAT but not deli

My top furling device for the genoa is turning very very badly. I need help to get it going or to dismantle it. I have already taken away the brown tigthening ring and now I can see a white plastic be

Zoom meeting - QSails owner/manager will present sails for Amels When: Saturday, 12 September 2020 20:00 to 21:00 (GMT+00:00) UTC Description: Time will be 2000 UTC. Over 60 Amel owners have purchased

Hi! Bill Kinney & I have been doing some work with new owners of an Amel 54. The outhaul is really stuck. Is there anyone in the group near Annapolis with a pulled for the outhaul that we could borrow

Reminder: Zoom meeting - QSails owner/manager will present sails for Amels When: Saturday, 12 September 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to RSVP Description: Time

I have been asked for the gearbox ratio of the gearbox and I am away from the boat. The boat is a 1993 Super Maramu hull number 110. It is a Hurth gearbox. The engine is a Perkins M80T Can anyone help

hello all, I plan to install a SCUBA compressor to fill the tanks and it will run using my 5.5 kw genset. Looking for recommendations on makes and model from those that have them onboard.

Hi all, We recently end-to-ended our anchor chain and I found the pictured device useful to guide the chain nice and flat at the bottom of the chain locker. It’s simply a piece of PVC pipe with a coup

Hi everyone, It's time to replace the good old anchor winch on our Euros 41. The thing is, per the original Amel design, the chain is not self-tailing as it is I believe on most Amels. We would like t

We would love to connect with others that have the same boat as us.

I have build up in the hose inside the holding tank. To me it looks as magic, how did the mount that one? Is it possible to replace? How? Paul on sykerpa SM 259, Lagos Portugal

Reminder: Zoom meeting - QSails owner/manager will present sails for Amels When: Saturday, 12 September 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to RSVP Description: Time

Hi all, since yesterday I have an oil pressure problem on my AMEL 54#96. When I go from normal speed to idle, the oil alarm starts. Of course, this doesn´t happen in the port but between the islands i

I learned something today with from a great 54 owner, from Dessalator, and from reading the recent specifications sheet for Filmtec SW30 membranes. · The actual pressure for the Green Zone on a Dessal

Dear all, hope everyone did have a great Chrismas and will have a good start into 2020. We are starting to prepare our Sharki for the long passage from Europe to the Caribbean. Up to now we have saile